It was found that the chemical enhancement of fly ash from coal combustion by tetrabutylammonium bromide treatment yields an effective and economically feasible material for the treatment of chromium and basic dye Rhodamine B containing effluents. Characterisation of coal fly ash and treatment with tetrabutylammonium bromide were done by using a Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, confocal three-dimensional microscope, X-ray diffraction and laser particle sizer. The studies of equilibrium in a bi-component system by means of extended Langmuir, extended Langmuir–Freundlich and Jain–Snoeyink models were analysed. The estimation of parameters of sorption isotherms in a bi-component system metal-dye has shown that the best-of-fit calculated values of experimental data for both sorbates have been the Jain–Snoeyink model and the extended Langmuir model, but only in the case of a Rhodamine B. The maximum monolayer adsorption capacity of the fly ash–tetrabutylammonium bromide was found to be 863 mg g−1 and 670 mg g−1 for chromium and Rhodamine B, respectively.
AdakABandyopadhyayMPalA (2005) Removal of crystal violet dye from wastewater by surfactant-modified alumina. Separation and Purification Technology44: 139–144.
2.
AdrianoDCPageALElseewiAA, et al. (1980) Utilization and disposal of fly ash and other coal residues in terrestrial ecosystems: A review. Journal of Environmental Quality9: 333–344.
3.
Al-AshehSBanatFAl-OmariR, et al. (2000) Predictions of binary sorption isotherms for the sorption of heavy metals by pine bark using single isotherm data. Chemosphere41: 659–665.
4.
AlverEMetinAÜ (2012) Anionic dye removal from aqueous solutions using modified zeolite: Adsorption kinetics and isotherm studies. Chemical Engineering Journal200–202: 59–67.
5.
AmoduOSOjumuTVNtwampeSK, et al. (2015) Rapid adsorption of crystal violet onto magnetic zeolite synthesized from fly ash and magnetite nanoparticles. Journal of Encapsulation and Adsorption Sciences5: 191–203.
6.
AnCHuangG (2012) Stepwise adsorption of phenanthrene at the fly ash–water interface as affected by solution chemistry: Experimental and modeling studies. Environmental Science & Technology46: 12742–12750.
7.
AnirudhanTSRamachandranM (2015) Adsorptive removal of basic dyes from aqueous solutions by surfactant modified bentonite clay (organoclay): Kinetic and competitive adsorption isotherm. Process Safety and Environmental Protection95: 215–225.
8.
AslamZShawabkehRAHusseinIA, et al. (2015) Synthesis of activated carbon from oil fly ash for removal of H2S from gas stream. Applied Surface Science327: 107–115.
9.
ASTM C618-05 (2005) Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. West Conshohocken, PA: ASTM International. Available at: www.astm.org.
10.
CarlsonCLAdrianoDC (2009) Environmental impacts of coal combustion residues. Journal of Environmental Quality22: 227–242.
11.
ChoHOhDKimK (2005) A study on removal characteristics of heavy metals from aqueous solution by fly ash. Journal of Hazardous Materials127: 187–195.
12.
ChrysochoouMDermatasD (2006) Evaluation of ettringite and hydrocalumite formation for heavy metal immobilization; literature review and experimental study. Journal of Hazardous Materials136: 20–33.
13.
CriniG (2006) Non-conventional low-cost adsorbents for dye removal: A review. Bioresource Technology97: 1061–1085.
14.
DaiSRenDChouC-L, et al. (2012) Geochemistry of trace elements in Chinese coals: A review of abundances, genetic types, impacts on human health, and industrial utilization. International Journal of Coal Geology94: 3–21.
15.
DengHYuX (2012) Adsorption of fluoride, arsenate and phosphate in aqueous solution by cerium impregnated fibrous protein. Chemical Engineering Journal184: 205–212.
16.
DerkowskiAFranusWBeranE, et al. (2006) Properties and potential applications of zeolitic materials produced from fly ash using simple method of synthesis. Powder Technology166: 47–54.
17.
DerkowskiAFranusWWaniak-NowickaH, et al. (2007) Textural properties v. CEC and EGME retention of Na-X zeolite prepared from fly ash at room temperature. International Journal of Mineral Processing82: 57–68.
18.
DermatasDMengX (2003) Utilization of fly ash for stabilization/solidification of heavy metal contaminated soils. Engineering Geology70: 377–394.
19.
DermatasDChrysochoouMMoonDH, et al. (2006) Ettringite-induced heave in chromite ore processing residue (COPR) upon ferrous sulfate treatment. Environmental Science & Technology40: 5786–5792.
20.
DermatasDPardaliSChrysochoouM, et al. (2007) Influence of X-ray powder diffraction (XRPD) sample preparation on contaminated media remediation assessment: Mineralogical evaluation of chromite ore processing residue (COPR). Journal of Environmental Quality36: 487–497.
21.
DizgeNAydinerCDemirbasE, et al. (2008) Adsorption of reactive dyes from aqueous solutions by fly ash: Kinetic and equilibrium studies. Journal of Hazardous Materials150: 737–746.
22.
FerraioloGZilliMConvertiA (1990) Fly-ash disposal and utilization. Journal of Chemical Technology & Biotechnology47: 281–305.
23.
FiolNVillaescusaI (2009) Determination of sorbent point zero charge: Usefulness in sorption studies. Environmental Chemistry Letters7: 79–84.
24.
GuptaVKSuhas (2009) Application of low-cost adsorbents for dye removal: A review. Journal of Environmental Management90: 2313–2342.
25.
HamdaouiaONaffrechouxE (2007) Modeling of adsorption isotherms of phenol and chlorophenols onto granular activated carbon Part I. Two-parameter models and equations allowing determination of thermodynamic parameters. Journal of Hazardous Materials147: 381–394.
26.
HsuT-CYuC-CYehC-M (2008) Adsorption of Cu2+ from water using raw and modified coal fly ashes. Fuel87: 1355–1359.
27.
HuiKSChaoCYHKotSC (2005) Removal of mixed heavy metal ions in wastewater by zeolite 4A and residual products from recycled coal fly ash. Journal of Hazardous Materials127: 89–101.
28.
JanošPBuchtovaHRýznarováM (2003) Sorption of dyes from aqueous solutions onto fly ash. Water Research37: 4938–4944.
29.
JiaoFWijayaNZhangL, et al. (2011) Synchrotron-based XANES speciation of chromium in the oxy-fuel fly ash collected from lab-scale drop-tube furnace. Environmental Science & Technology45: 6640–6646.
30.
LiLLiuSZhuT (2010) Application of activated carbon derived from scrap tires for adsorption of Rhodamine B. Journal of Environmental Sciences22: 1273–1280.
31.
LuoJShenHMarkströmH, et al. (2011) Removal of Cu2+ from aqueous solution using fly ash. Journal of Minerals and Materials Characterization and Engineering10: 561–571.
32.
MaliyekkalSMAnshupAntonyKR, et al. (2010) High yield combustion synthesis of nanomagnesia and its application for fluoride removal. Science of the Total Environment408: 2273–2282.
33.
Medellin-CastilloNAPadilla-OrtegaERegules-MartínezMC, et al. (2017) Single and competitive adsorption of Cd(II) and Pb(II) ions from aqueous solutions onto industrial chili seeds (Capsicum annuum) waste. Sustainable Environment Research27: 61–69.
34.
MittalAMittalJMalviyaA, et al. (2010) Adsorption of hazardous dye crystal violet from wastewater by waste materials. Journal of Colloid and Interface Science343: 463–473.
35.
MoonDHDermatasDWazneM, et al. (2007) Swelling related to ettringite in chromite ore processing residue. Environmental Geochemistry and Health29: 289–294.
36.
MorSChhaviMKSushilKK, et al. (2018) Assessment of hydrothermally modified fly ash for the treatment of methylene blue dye in the textile industry wastewater. Environment, Development and Sustainability20: 625–639.
37.
MoutsatsouAStamatakisEHatzizotziaK, et al. (2006) The utilization of Ca-rich and Ca-Si-rich fly ashes in zeolites production. Fuel85: 657–663.
38.
MozgawaWJastrzębskiWHandkeM (2006) Cation-terminated structural clusters as a model for the interpretation of zeolite vibrational spectra. Journal of Molecular Structure792–793: 163–169.
39.
NorooziBSorialG A (2013) Applicable models for multi-component adsorption of dyes: A review. Journal of Environmental Sciences25: 419–429.
40.
ӦzdemirYDoǧanMAlkanM (2006) Adsorption of cationic dyes from aqueous solutions by sepiolite. Microporous and Mesoporous Materials96: 419–427.
41.
Padilla-OrtegaELeyva-RamosRFlores-CanoJV (2013) Binary adsorption of heavy metals from aqueous solution onto natural clays. Chemical Engineering Journal225: 535–546.
42.
PapandreouADStournarasCJPaniasD, et al. (2011) Adsorption of Pb(II), Zn(II) and Cr(III) on coal fly ash porous pellets. Minerals Engineering24: 1495–1501.
43.
QuerolXMorenoNUmanaJC, et al. (2002) Synthesis of zeolites from coal fly ash: An overview. International Journal of Coal Geology50: 413–423.
44.
ReddyaDHKSeshaiahaKReddyAVR, et al. (2010) Biosorption of Pb2+ from aqueous solutions by Moringa oleifera bark: Equilibrium and kinetic studies. Journal of Hazardous Materials174: 831–838.
45.
RožićMMiljanićS (2011) Sorption of HDTMA cations on Croatian natural mordenite tuff. Journal of Hazardous Materials185: 423–429.
46.
RuhlLVengoshADwyerGS, et al. (2010) Environmental impacts of the coal ash spill in Kingston. Tennessee: An 18-month survey. Environmental Science & Technology44: 9272–9278.
47.
SagooSKJockuschRA (2011) The fluorescence properties of cationic Rhodamine B in the gas phase. Journal of Photochemistry and Photobiology A: Chemistry220: 173–178.
48.
SamborASzymanekA (2014) Analysis of the distribution of chemical compounds from fly ash exposed to weather conditions. Chemical and Process Engineering35: 265–275.
49.
SarmaGKGuptaSSBhattacharyyaKG (2016) Adsorption of crystal violet on raw and acid-treated montmorillonite, K10, in aqueous suspension. Journal of Environmental Management171: 1–10.
50.
SelvamPPPreethiSBasakaralingamP, et al. (2008) Removal of rhodamine B from aqueous solution by adsorption onto sodium montmorillonite. Journal of Hazardous Materials155: 39–44.
51.
SeredinVVFinkelmanRB (2008) Metalliferous coals: A review of the main genetic and geochemical types. International Journal of Coal Geology76: 253–289.
52.
SočoEKalembkiewiczJ (2016) Comparison of adsorption of Cd(II) and Pb(II) ions on pure and chemically modified fly ashes. Chemical and Process Engineering37: 215–234.
53.
SunDZhangXWuY, et al. (2010) Adsorption of anionic dyes from aqueous solution on fly ash. Journal of Hazardous Materials181: 335–342.
54.
SzalaBBajdaTMatusikJ, et al. (2015) BTX sorption on Na-P1 organo-zeolite as a process controlled by the amount of adsorbed HDTMA. Microporous and Mesoporous Materials202: 115–123.
55.
VieiraRSGuibalESilvaEA, et al. (2007) Adsorption and desorption of binary mixtures of copper and mercury ions on natural and crosslinked chitosan membranes. Adsorption13: 603–611.
WangL (2012) Application of activated carbon derived from ‘waste’ bamboo culms for the adsorption of azo disperse dye: Kinetic, equilibrium and thermodynamic studies. Journal of Environmental Management102: 79–87.
58.
WangSMaQZhuZH (2008) Characteristics of coal fly ash and adsorption application. Fuel87: 3469–3473.
59.
WangSBWuHW (2006) Environmental-benign utilisation of fly ash as low-cost adsorbents. Journal of Hazardous Materials136: 482–501.
60.
WangXWangJGuoP, et al. (2009) Degradation of rhodamine B in aqueous solution by using swirling jet-induced cavitation combined with H2O2. Journal of Hazardous Materials169: 486–49.
61.
WHO (1996) WHO/SDE/WSH/03.04/04 Chromium in Drinking-water. Background document for development of WHO Guidelines for Drinking-water Quality. Originally published in Guidelines for drinking-water quality, 2nd ed. Vol. 2. Health criteria and other supporting information. Geneva: World Health Organization.
62.
ZhangX-FZhangJLuX (2015) The fluorescence properties of three rhodamine dye analogues: Acridine Red, Pyronin Y and Pyronin B. Journal of Fluorescence25: 1151–1158.
63.
ZhengaLDangaZYiX, et al. (2010) Equilibrium and kinetic studies of adsorption of Cd(II) from aqueous solution using modified corn stalk. Journal of Hazardous Materials176: 650–656.
