This paper presents the geotechnical and environmental suitability of recycling gypsum-based waste material produced from plasterboard manufacturing. Most of the current plasterboard manufacturing industries are dumping these wastes to landfills. Among the major impediments to recycling such waste are environmental concerns around using such recycled material, as well as proper and suitable places to use it. To investigate these, such a waste from an Australian plasterboard manufacturing company was collected and a series of geotechnical properties were tested to evaluate the materials’ suitability for any engineering construction. It was found that the tested gypsum-based plasterboard materials are suitable to use as road subgrade, pipe bedding and pipe backfill material. To ascertain the environmental safety of using such material in regards to manual handling as well as contaminants’ leaching into the surrounding environment, materials were thoroughly tested for more than a hundred different contaminants. Tests were conducted to evaluate both the contaminants’ concentrations in the sample as well as the leaching behaviour of those contaminants. It was found that concentrations of the tested contaminants were either below the individual detection limit or the safe limit defined by the local regulatory authority.
AhmedAIssaUH (2014) Stability of soft clay soil stabilised with recycled gypsum in a wet environment. Soils and Foundations54: 405–416.
2.
AhmedAUgaiKKameiT (2011) Laboratory and field evaluations of recycled gypsum as a stabilizer agent in embankment construction. Soils and Foundations51: 975–990.
3.
AlamBAshrafMShahzadaK, et al. (2012) Sulphate attack in high-performance concrete – A review. International Journal of Advanced Structures and Geotechnical Engineering, 1: 15–18.
4.
ArulrajahADisfaniMMMaghoolpilehroodF, et al. (2015) Engineering and environmental properties of foamed recycled glass as a lightweight engineering material. Journal of Cleaner Production94: 369–375.
5.
ArulrajahAKuaTAHorpibulsukS, et al. (2017) Recycled glass as a supplementary filler material in spent coffee grounds geopolymers. Construction and Building Materials151: 18–27.
6.
ArulrajahAMaghoolpilehroodFDisfaniMM, et al. (2014) Spent coffee grounds as a non-structural embankment fill material: engineering and environmental considerations. Journal of Cleaner Production72: 181–186.
7.
AS (1996) Methods for sampling and testing aggregates Method 11: Particle size distribution by sieving. Australian Standards AS-1141.11. NSW, Australia.
8.
AS (1997a) Soil chemical tests – Determination of the pH value of a soil – Electrometric method. Australian Standards 1289.4.3.1. Sydney, Australia.
9.
AS (1997b) Wastes, sediments and contaminated soils, part 3: preparation of leachates – bottle leaching procedure. Australian Standards 4439.3. Homebush, NSW, Australia.
10.
AS (1998) Determination of the California Bearing Ratio of a soil – Standard laboratory method for a remoulded specimen. Australian Standards 1289.6.1.1. Sydney, Australia.
11.
AS (2000) Particle density and water absorption of fine aggregate. Australian Standard 1141.5. Sydney, Australia.
12.
AS (2001) Soil strength and consolidation tests – Determination of permeability of a soil – Constant head method for a remoulded specimen. Australian Standards 1289.6.7.1. Sydney, Australia.
13.
AS (2003a) Soil compaction and density tests – Determination of the dry density/moisture content relation of a soil using standard compactive effort. Australian Standards 1289.5.1.1. Sydney, Australia.
14.
AS (2003b) Methods for testing soils for engineering purposes. Determination of the shrinkage index of a soil; shrink swell index. Australian Standards 1289.7.1.1. Sydney, Australia.
15.
CamariniGPinheiroSMM (2014) Microstructure of recycled gypsum plaster by SEM. Advanced Materials Research912–914: 243–246.
16.
DEWHA (2009) The full cost of landfill disposal in Australia. A report prepared by BMD Group for Department of the Environment, Water, Heritage and the Arts, Australia.
17.
EPA Victoria (2009) Solid industrial waste hazard categorization and management. Publication No. IWRG 631, Victoria, Australia: Environmental Protection Agency.
18.
ErbsANagalliAMymrineV, et al. (2015) Determination of physical and mechanical properties of recycled gypsum from the plasterboard sheets. Ceramica61: 483–487.
19.
GeraldoRHPinheiroSMMSilvaJS, et al. (2017) Gypsum plaster waste recycling: A potential environmental and industrial solution. Journal of Cleaner Production164: 288–300.
20.
Godinho-CastroAPTestolinRCJankeL, et al. (2012) Incorporation of gypsum waste in ceramic block production: Proposal for a minimal battery of tests to evaluate technical and environmental viability of this recycling process. Waste Management32: 153–157.
21.
ImteazMAAliMMYArulrajahA (2012) Possible environmental impacts of recycled glass used as a pavement base material. Waste Management and Research30: 917–921.
22.
KosturkiewiczBJanewiczAHryniewiczM, et al. (2017) Synthesis on research results of FGD gypsum briquetting, E3S Web of Conferences14: 02031.
23.
KuttahDKSatoKKogaC (2015) Evaluating the dynamic stabilities of asphalt concrete mixtures incorporating plasterboard wastes. International Journal of Pavement Engineering16: 929–938.
24.
LushnikovaNDvorkinL (2016) Sustainability of gypsum products as a construction material. In: KhatibJM (ed) Sustainability of Construction Materials. 2nd edn, ch. 25. Cambridge: Woodhead Publishing Series in Civil and Structural Engineering, Elsevier.
25.
MaghoolFArulrajahADuY, et al. (2017) Environmental impacts of utilizing waste steel slag aggregates as recycled road construction materials. Clean Technologies and Environmental Policy19: 949–958.
26.
MarvinE (2000) Gypsum Wallboard Recycling and Reuse Opportunities in the State of Vermont. Report produced for Waste Management Division, Vermont Agency of Natural Resources, USA.
27.
NavarroaJGRiveroaASathrebR (2016) Life cycle energy and material flow implications of gypsum plasterboard recycling in the European Union. Resources Conversation and Recycling108: 171–181.
28.
NdukweIYuanQ (2016) Drywall (Gyproc plasterboard) recycling and reuse as a compost-bulking agent in Canada and North America: A review. Recycling1: 311–320.
29.
RahmanMAImteazMAArulrajahA, et al. (2015) Recycled construction and demolition materials in permeable pavement systems: Geotechnical and hydraulic characteristics. Journal of Cleaner Production90: 183–194.
