The main objective of this research was to investigate the waste characteristics and management activities in the Savojbolagh industrial zone, Iran, in order to rank the active industries from environmental perspectives using an innovative index. First, the industrial categories with over 50 employees were identified and classified according to their production process. Then, 54 industries were selected and all industrial processes, the types and quantities of products, per capita industrial waste generation, physical analysis and management activities in terms of minimisation, storage, processing, recycling and disposal were evaluated. The required data were obtained through questioners, interviews and field observations. A scoring system was prepared for evaluation of environmental status of waste management practices. Results indicated that the total industrial waste generation rate was 67,258 kg d-1, in which 4528 belonged to hazardous waste. Furthermore, the per capita waste generation rate was 5.51 kg d-1. Plastic, paper and cardboard and metals constituted the most fractions of wastes, respectively. Food and beverage, metallic and chemical/plastic industries were the biggest waste generators. Metallic industries with total score of 502.5 and non-metalic-mineral industries with the total score of 114 were categorised as the best and worst industries in terms of waste management practices.
AbedinzadeFMonavariM (2007) Study of solid waste management in industrial state of Rasht. Environmental Sciences4: 101–118.
2.
AdazabraANViruthagiriGShanmugamN (2017) Management of spent shea waste: An instrumental characterization and valorization in clay bricks construction. Waste Management64: 286–304.
3.
AparcanaS (2017) Approaches to formalization of the informal waste sector into municipal solid waste management systems in low- and middle-income countries: Review of barriers and success factors. Waste Manag61: 593–607.
4.
BainAINAShenoyMAshtonWet al. (2010) Industrial symbiosis and waste recovery in an Indian industrial area. Resources, Conservation and Recycling54: 1278–1287.
5.
BakshanASrourIChehabGet al. (2017) Behavioral determinants towards enhancing construction waste management: A Bayesian Network analysis. Resources, Conservation and Recycling117: 274–284.
6.
CasaresMUlierteNMataránAet al. (2005) Solid industrial wastes and their management in Asegra (Granada, Spain). Waste Management25: 1075–1082.
7.
El-FadelMZeinatiMEl-JisrKet al. (2001) Industrial-waste management in developing countries: The case of Lebanon. Journal of Environmental Management61: 281–300.
8.
FarzadkiaM (2013) Environmental ranking for industries located at west of Tehran based on the quantitative and qualitative characteristics of industrial wastewater in 2011. Iran Occupational Health9: 13–23.
9.
FarzadkiaMJorfiSAkbariHet al. (2012) Evaluation of dry solid waste recycling from municipal solid waste: Case of Mashhad city, Iran. Waste Management & Research30: 106–112.
Garcia-GarciaGWoolleyERahimifardSet al. (2017b) A methodology for sustainable management of food waste. Waste and Biomass Valorization8: 2209–2227.
12.
GarciaAGandiniALabidiJet al. (2016) Industrial and crop wastes: A new source for nanocellulose biorefinery. Industrial Crops and Products93: 26–38.
13.
GengYZhuQHaightM (2007) Planning for integrated solid waste management at the industrial park level: A case of Tianjin, China. Waste Management27: 141–150.
14.
HassanvandMNabizadehRHeidariM (2008) Municipal solid waste analysis in Iran. Iranian Journal of Health and Environment1: 9–18.
15.
HoungHChengYW (2013) Electronic tracking and management of industrial waste in Taiwan. Journal of Material Cycles and Waste Management15: 146–153.
KangYYJeonTWKimWIet al. (2014) Correlation study of hazardous waste characteristics among various chemical processes in Republic of Korea. Journal of Material Cycles and Waste Management16: 566–575.
18.
KaramiMAFarzadkiaMJonidi JaafariAet al. (2011) Investigation of industrial waste management in industries located between Tehran and Karaj Zone in 2009–2010. Iran Journal of Health & Environment4: 507–518.
19.
KoolivandAMazandaranizadehHBinavaporMet al. (2017) Hazardous and industrial waste composition and associated management activities in Caspian industrial park, Iran. Environmental Nanotechnology, Monitoring & Management7: 9–14.
20.
LiLWangSHLinYet al. (2014) A covering model application on Chinese industrial hazardous waste management based on integer program method. Ecological Indicators51: 237–243.
21.
LiuGHaoYDongLet al. (2017) An energy-LCA analysis of municipal solid waste management. Resources, Conservation and Recycling120: 131–143.
22.
LiuYGuoDDongLet al. (2016) Pollution status and environmental sound management (ESM) trends on typical general industrial solid waste. Procedia Environmental Sciences31: 615–620.
23.
Lopez-DelgadoATayibiH (2012) Can hazardous waste become a raw material?: The case study of an aluminium residue: A review. Waste Management & Research30: 474–484.
24.
MohYManafLA (2017) Solid waste management transformation and future challenges of source separation and recycling practice in Malaysia. Resources, Conservation and Recycling116: 1–14.
25.
MohamedAFAwangMNasirMet al. (2008) Ecosystem approach for sustainable industrial hazardous waste management in Malaysia. Environmental Research2: 306–310.
26.
MrayyanBHamdiMR (2006) Management approaches to integrated solid waste in industrialized zones in Jordan: A case of Zarqa City. Waste Management26: 195–205.
27.
NaviaRBezamaA (2008) Hazardous waste management in Chilean main industry: An overview. Journal of Hazardous Materials158: 177–184.
28.
NurisepehrMJorfiSRezaei KakantaryRet al. (2012) Sequencing treatment of landfill leachate using ammonia stripping, Fenton oxidation and biological treatment. Waste Management & Research30: 883–887.
29.
ParkJY (2014) Assessing determinants of industrial waste reuse: The case of coal ash in the United States. Resources, Conservation and Recycling92: 116–127.
30.
PatricioJCostaINizaS (2015) Urban material cycle closing – assessment of industrial waste management in Lisbon region. Journal of Cleaner Production106: 389–399.
31.
RezaeeAGodiniHJorfiS (2010) Nitrate removal from aquous solution using MgCl2 impregrnated activated carbon. Environmental Engineering and Management Journal9: 449–452.
32.
RabbaniMHeidariRFarrokhiaslHet al. (2018) Using metaheuristic algorithms to solve a multi-objective industrial hazardous waste location-routing problem considering incompatible waste types. Journal of Cleaner Production170: 227–241.
33.
RizzoE (2015) Co-composting of poultry manure with other agricultural wastes: Process performance and compost horticultural use. Journal of Material Cycles and Waste Management17: 42–50.
34.
SalihogluG (2010) Industrial hazardous waste management in Turkey: Current state of the field and primary challenges. Journal of Hazardous Materials177: 42–56.
35.
SiddiqueR (2014) Utilization of industrial by-products in concrete. Procedia Engineering95: 335–347.
36.
SilvaARosanoMStockerLet al. (2017) From waste to sustainable materials management: Three case studies of the transition journey. Waste Management61: 547–557.
37.
ThaiNTK (2009) Hazardous industrial waste management in Vietnam: Current status and future direction. Journal of Material Cycle and Waste Management11: 258–262.
38.
ThomanetzE (2012) Solid recovered fuels in the cement industry with special respect to hazardous waste. Waste Management & Research30: 404–412.
39.
VadenboCHellwegSGuilien-GosalbezG (2014) Multi-objective optimization of waste and resource management in industrial networks – Part I: Model description. Resources, Conservation and Recycling89: 52–63.
40.
ZhangMWangYSongYet al. (2016) Manifest system for management of non-hazardous industrial solid wastes: Results from a Tianjin industrial park. Journal of Cleaner Production133: 252–261.
