Utilization of carbon dioxide (CO2) in thermochemical treatment of waste plastics may significantly help to improve CO2 recycling, thus simultaneously curtailing dioxins/furans and CO2 emissions. Although CO2 is not such an effective gasifying agent as steam, a few investigations have explored the utilization of CO2 in conjunction with steam to achieve somewhat higher carbon conversion. This work presents a comparative evaluation study of CO2 and steam gasification of a typical post-consumer waste plastics mixture using an Aspen Plus equilibrium model. The effect of flow rate of gasifying medium (CO2 and/or steam) and gasification temperature on product gas composition, carbon conversion, and cold gas efficiency has been analyzed. Simulation results demonstrate that CO2 can serve as a potential gasifying agent for waste plastics gasification. The resulting product gas was rich in CO whereas CO2–steam blends yield a wider H2/CO ratio, thus extending the applications of the product gas.
AlvarezJSKumagaiSWuCet al. (2014) Hydrogen production from biomass and plastic mixtures by pyrolysis-gasification. International Journal of Hydrogen Energy39: 10883–10891.
2.
ArenaU (2012) Process and technological aspects of municipal solid waste gasification: a review. Waste Management32: 625–639.
3.
AznarMCaballeroMSanchoJet al. (2006) Plastic waste elimination by co-gasification with coal and biomass in fluidized bed with air in pilot plant. Fuel Processing Technology87: 409–420.
4.
BodenTAMarlandGAndresRJ (2011) Global, Regional, and National Fossil-Fuel CO2 Emissions. Oak Ridge, TN: Carbon Dioxide Information Analysis Center, Oak Ridge National Laboratory, U.S. Department of Energy.
5.
ChangNBHuangSH (1995) Statistical modeling for the prediction and control of PCDDs and PCDFs emissions from municipal solid waste incinerators. Waste Management & Research13: 379–400.
6.
ChernSMFanLTWalawenderWP (1989) Analytical calculation of equilibrium gas composition in a C–H–O-inert system. AIChE Journal35: 673–675.
7.
ChinLFBYusupSAl ShoaibiAet al. (2014a) Comparative studies on catalytic and non-catalytic co-gasification of rubber seed shell and high density polyethylene mixtures. Journal of Cleaner Production70: 303–314.
8.
ChinLFBYusupSAl ShoaibiAet al. (2014b) Kinetic studies of co-pyrolysis of rubber seed shell with high density polyethylene. Energy Conversion & Management87: 746–753.
9.
ChinLFBYusupSAl ShoaibiAet al. (2014c) Investigation of co-gasification of rubber seed shell and high density polyethylene mixtures. Chemical Engineering Transactions39: 505–510.
10.
CommonerBShapiroKWebsterT (1987) The origin and health risks of PCDD and PCDF. Waste Management & Research5: 327–346.
11.
De Souza-SantosML (2004) Solid Fuels Combustion and Gasification: Modeling, Simulation, and Equipment Operations. New York: CRC Press.
12.
ErkiagaALopezGAmutioMet al. (2013) Syngas from steam gasification of polyethylene in a conical spouted bed reactor. Fuel109: 461–469.
13.
GuJWuSZhangXet al. (2009) CO2-gasification reactivity of different carbonaceous materials at elevated temperatures. Energy Sources, Part A: Recovery, Utilization and Environmental effects31: 232–243.
14.
KannanPAl ShoaibiASSrinivasakannanS (2013) Energy recovery from co-gasification of waste polyethylene and polyethylene terephthalate blends. Computers & Fluids88: 38–42.
15.
KawaguchiKMiyakoshiKMomonoiK (2002) Studies on the pyrolysis behavior of gasification and melting systems for municipal solid waste. Journal of Materials Cycles and Waste Management4: 102–110.
16.
KimJWMunTYKimJOet al. (2011) Air gasification of mixed plastic wastes using a two-stage gasifier for the production of producer gas with low tar and a high caloric value. Fuel90: 2266–2272.
17.
LahijaniPZainalZMohammadiMet al. (2015) Conversion of the greenhouse gas CO2 to the fuel gas CO via the Boudouard reaction: a review. Renewable & Sustainable Energy Reviews41: 615–632.
18.
MansarayKGAl-TaweelAMGhalyAEet al. (2000) Mathematical modeling of a fluidized bed rice husk gasifier. Part I. Model development. Energy Sources22: 83–98.
19.
MastelloneMZaccarielloLArenaU (2010) Co-gasification of coal, plastic waste and wood in a bubbling fluidized bed reactor. Fuel89: 2991–3000.
20.
SanchoJAAznarMPToledoJM (2008) Catalytic air gasification of plastic waste (polypropylene) in fluidized bed. Part I. Use of in-gasifier bed additives. Industrial & Engineering Chemistry Research47: 1005–1010.
21.
SyedSJanajrehIGhenaiC (2012) Thermodynamics equilibrium analysis within the entrained flow gasifier environment. International Journal of Thermal & Environmental Engineering4: 47–54.
22.
WilkVHofbauerH (2013) Conversion of mixed plastic wastes in a dual fluidized bed steam gasifier. Fuel107: 787–799.
23.
WuCWilliamsPT (2010) Pyrolysis–gasification of plastics, mixed plastics and real-world plastic waste with and without Ni–Mg–Al catalyst. Fuel89: 3022–3032.
24.
XiaoRJinBZhouHet al. (2007) Air gasification of polypropylene plastic waste in fluidized bed gasifier. Energy Conversion & Management48: 778–786.
