The objective of this study was to find opportunities for metal waste recycling in the process of rock breaking in mines. A built-up cutter design for a combined cutter-loader and a recycling technique for a considerable portion of the deteriorated tool are suggested. Industrial tests have proven the possibility of a ten-fold increase in the use of cutters on mining machines for coal rock mass destruction. The proposed technique allows a four times reduction in metal consumption in the production and use of cutters and a reduction of the ultimate resulting waste by 80%. This advanced technique could be transferred extensively into such industries as open-cast mining, repair of motor-roads, construction and agriculture.
BellA (2013) Metal matrix composite mining pick and method of making. US Patent 2013/02–7445 A 1. 15August2013.
2.
BolobovVBobrovVThalerovMet al. (2012) Cause rapid wear of tangential cutters. The Proceedings of the Mining Institute195: 238–240.
3.
BookhamerPASwopeCA (2014) Cutting tool with insert having a tapered bottom. US Patent 2014/0054951 A1. 27February2014.
4.
ChinakhovDA (2011) Study of thermal cycle and cooling rate of steel 30HGSA single-pass weld joints. Applied Mechanics and Materials52: 442–447.
5.
DewangadSChattopadhyayaS (2016) Performance analysis of two different comical picks used in linear cutting operation of coal. Arabian Journal for Science and Engineering41: 249–265.
6.
DewangadSChattopadhyayaSHlochS (2015) Critical damage analysis of WC-Co tip of conical pick due to coal excavation in mines. Advances in Material Science and Engineering 292046.
7.
FaderJLammerA (2011) Cutting tip and cutting bit having increased strength and penetration capability. European patent specification EP 2 540 959 B1, Application number: 11171611.4. 28June2011.
8.
FuLDuCLiJZhengK (2015) Influence of pick working angle on cutting performance of auger miner’s aiguilles. Advances in Mechanical Engineering7: 1–10. Epub ahead of print 14 May 2015. DOI: 10.1177/1687814015585427.
9.
GreenspanGGreenspanAAlterG (2014) Mining and demolition tool. US Patent 2014/0191562 A 1. 10July2014.
10.
HallDR (2014) Pick with hardened core assembly. US Patent 8,777,326 B2. 15July2014.
11.
JonkerCRRiesBHLachmannFF (2014) Pick assembly, pick holder for same, pick tool for same and strike ekement for same. US Patent 2014/0015305 A1. 16January2014.
12.
KhoreshokAATsekhinAMBorisovAY (2012) Influencing of operation conditions of mining machines on the design of their effectors. Mining Equipment and Electromechanics6: 2–6.
13.
KhoreshokAAMametyevLETsekhinAMet al (2013) Production and Operation of Destructive Mining Machines Tool. Tоmsk, Russia: Tomsk Polytechnic University, pp.57–64.
14.
KolesnichenkoEKolesnichenkoILyubomischenkoEet al. (2012) Technological bases of ventilation of the face on the criterion of the dust-producing ability of roadheaders. Coal6: 39–42.
15.
LiuXLiuSLiLet al. (2015) Experiment on conical pick cutting rock material assisted with front and rear water jet. Materials Science and Engineering2015: 506579.
16.
Mamet’evLEKhoreshokAATsekhinAMet al. (2015) Stress distribution in attachments of disc cutters in heading drivage. Journal of Mining Science51(6): 1150–1156.
MonyakKMouthaanDFaderJ (2014) Reduced volume cutting tip and cutting bit incorporating same. US Patent 8,678,517 B2. 25March2014.
19.
ParrottGA (2014) Extraction system for mineral cutter pick. US Patent 8,661,640 B2. 4March2014.
20.
ProkopenkoSSushkoAKurzinaI (2015a) New design of cutters for coal mining machines. IOP Conference Series: Materials Science and Engineering91: 012058.
21.
ProkopenkoSLudzishVKurzinaIet al. (2015b) Results of industry testing of multiple use rock-cutting picks. Gornyi Zhurnal5: 67–71.
22.
ProkopenkoSKurzinaILesinYu (2016) Prospects for improvement of mining machines’ cutting picks. IOP Conference Series: Materials Science and Engineering124: 012134.
23.
SarwaryEHaganP (2015) The effect of tool geometry on cutting performance. Mining Education Australia–Journal of Research Projects Review4: 43–48.
24.
TompsonPNTankK (1990) Cutter pick for mining using hydraulic stream. US Patent 4,902,073. 20February1990.
25.
TrubetskoyKN (2011) Main directions and ways of solving the problems of resources for the integrated development of mineral resources with the Earth’s surface. Mining Information and Analytical Newsletter1: 433–446.
26.
VaisbergLAAzbelYIArsentyevVAet al. (2013) Current state of recycling engineering in the mining industry. Mineral Processing4: 47–49.
