The present study focuses on pretreatment of enhancing the properties of refuse-derived fuel (RDF) via low-temperature microwave irradiation. These improved properties include lower chlorine content, a more porous surface structure and better combustion characteristics. In this study, low-temperature microwave irradiation was carried out in a modified microwave apparatus and the range of temperature was set to be 220–300℃. We found that the microwave absorbability of RDF was enhanced after being partly carbonized. Moreover, with the increasing of the final temperature, the organochlorine removal ratio was greatly increased to 80% and the content of chlorine was dramatically decreased to an extremely low level. It was also interesting to find that the chlorine of RDF was mainly released as HCl rather than organic chloride volatiles. The finding is just the same as the polyvinyl chloride pyrolysis process. In addition, pores and channels emerged during the modifying operation and the modified RDF has better combustibility and combustion stability than traditional RDF. This work revealed that low-temperature modification of RDF via microwave irradiation is significant for enhancing the quality of RDF and avoiding HCl erosion of equipment substantially.
AhnSYEomSYRhieYH (2013) Application of refuse fuels in a direct carbon fuel cell system. Energy51: 447–456.
2.
AnginD (2013) Effect of pyrolysis temperature and heating rate on biocharobtained from pyrolysis of safflower seed press cake. Bioresource Technology128: 590–597.
3.
AnuragGSmithRHillD (2007) Wastes as co-fuels: The policy framework for solid recovered fuel (SRF) in Europe, with UK implications. Environmental Science Technology41: 4868–4874.
4.
BélangerJRParéJRJ (2006) Applications of microwave-assisted processes (MAP™) to environmental analysis. Analytical Bioanalytical Chemistry386: 1049–1058.
5.
BosmansADe DobbelaereCHelsenL (2014) Pyrolysis characteristics of excavated waste material processed into refuse derived fuel. Fuel122: 198–205.
6.
ChartCBoonyaCChettiyappanV (2010) Recovery of plastic wastes from dumpsite as refuse-derived fuel and its utilization in small gasification system. Bioresource Technology101: 1522–1527.
7.
ChiangKYJihJCLinKL (2008) The effect of calcium hydroxide on hydrogen chloride emission characteristics during a simulated densified refuse-derived fuel combustion process. Journal of Hazardous Materials157: 170–178.
8.
ChoiYSHanSKimSJ (2012) Characterization of Korean solid recovered fuels (SRFs): An analysis and comparison of SRFs. Waste Management & Research30: 442–449.
9.
CostnerPK (1998) Correlation of chlorine input and PCDD/PCDF emissions at a full scale hazardous waste incinerator. Organohalogen Compounds32: 436–440.
10.
Di GregorioFLucioZ (2012) Fluidized bed gasification of a packaging derived fuel: energetic, environmental and economic performances comparison for waste-to-energy plants. Energy42: 331–341.
11.
EdoMBudarinVAracilI (2016) The combined effect of plastics and food waste accelerated the thermal decomposition of refuse-derived fuels and fuel blends. Fuel180: 424–432.
12.
EN 15105:2005 (2005) Solid biofuels-Methods for determination of the water soluble content of chloride, sodium and potassium.
13.
EN 15359:2011 (2011) Solid recovered fuels-specifications and classes.
14.
FanDP (2006) Based on the application of the new combustion index of Kooij in Zhanjiang power plant. Thesis, Huazhong University of Science and Technology.
15.
FellnerJAschenbrennerPCencicO. (2011) Determination of the biogenic and fossil organic matter content of refuse-derived fuels based on elementary analyses. Fuel90: 3164–3171.
16.
GabrielCGabrielSGrantEH. (1998) Dielectric parameters relevant to microwave dielectric heating. Chemical Society Reviews27: 213–214.
17.
GallardoACarlosMBoveaMD (2014) Analysis of refuse derived fuel from the municipal solid waste reject fraction and its compliance with quality standards. Journal of Cleaner Production83: 118–125.
18.
GargASmithRHillD. (2007) Wastes as co-fuels: the policy framework for solid recovered fuel (SRF) in Europe, with UK implications. Environmental Science and Technology41: 4868–4874.
19.
GargASmithRHillD. (2009). An integrated appraisal of energy recovery options in the United Kingdom using solid recovered fuel derived from municipal solid waste. Waste Management29: 2289–2297.
20.
GenonGBrizioE (2008). Perspectives and limits for cement kilns as a destination for RDF. Waste Management28: 2375–2385.
21.
GuoZYZhangLXWangP. (2013) Study on kinetics of coal pyrolysis at different heating rates to produce hydrogen. Fuel Process Technology107: 23–26.
22.
HuEJHuangZHLiuB. (2009) Experimental investigation on performance and emissions of a spark-ignition engine fuelled with natural gas-hydrogen blends combined with EGR. International Journal of Hydrogen Energy34: 528–539.
23.
ISO 17246:2010 (2010) Coal-proximate analysis.
24.
ISO 587:1997 (1997) Solid mineral fuels—Determination of chlorine using Eschka mixture.
25.
Jimenez-CorderoDHerasFAlonso-MoralesN. (2013) Porous structure and morphology of granular chars from flash and conventional pyrolysis of grape seeds. Biomass Bioenergy54: 123–132.
26.
LeCDKolaczkowskiST (2015) Steam gasification of a refuse derived char: Reactivity and kinetics. Chemical Engineering Research and Design102: 389–398.
27.
LeCDKolaczkowskiSTMcClymontDWJ (2015) Using quadrupole mass spectrometry for on-line gas analysis - Gasfication of biomass and refuse derived fuel. Fuel139: 337–345.
28.
LopezAMarcoICaballeroBM (2011) Dechlorination of fuels in pyrolysis of PVC containing plastic wastes. Fuel Processing Technology92: 253–260.
29.
ManyaJJGarcia-CeballosFAzuaraM (2015) Pyrolysis and char reactivity of a poor-quality refuse-derived fuel (RDF) from municipal solid waste. Fuel Processing Technology140: 276–284.
MiskolcziNBorsodiNBuyongF. (2011) Production of pyrolytic oils by catalytic pyrolysis of Malaysian refuse-derived fuels in continuously stirred batch reactor. Fuel Processing Technology92: 925–932.
32.
MuthuramanMNamiokaTYoshikawaK (2010) A comparison of co-combustion characteristics of coal with wood and hydrothermally treated municipal solid waste. Bioresource Technology101: 2477–24782.
33.
MyrinESPerssonPEJanssonS (2014) The influence of food waste on dioxin formation during incineration of refuse-derived fuels. Fuel132: 165–169.
34.
NandiniC (1994) Thermal decomposition of poly (vinyl chloride). Journal of Polymer Science A Polymer Chemistry32: 1225–1237.
35.
NithikulJKarthikeyanOVisvanathanC (2011) Reject management from a mechanical, biological treatment plant in Bangkok, Thailand. Resource Conservation Recycle55: 417–422.
36.
OllilaHJMoilanenATiainenMS. (2006) SEM-EDS characterization of inorganic material in refuse-derived fuel. Fuel85: 2586–2592.
37.
RaoNBrienKO (1998) Design Date for Plastics Engineers. Cincinnati, OH: Hanser Publishers, p.84.
38.
RussellADAntreouEILamSS. (2012). Microwave- assisted pyrolysis of HDPE using an activated carbon bed. RSC Advances2: 6756.
39.
SongZWLvYBTongLY (2009) Thermal-behavior study of chlorine released from composite refuse derived fuel. Waste Management29: 2298–2305.
40.
TaylorRRayRChapmanC (2013) Advanced thermal treatment of auto shredder residue and refuse derived fuel. Fuel106: 401–409.
41.
UndriARosiLFredianiP (2014) Fuel from microwave assisted pyrolysis of waste multilayer packaging beverage. Fuel133: 7–16.
42.
WaglandSTKilgallonPCoveneyP (2011) Comparison of coal/solid recovered fuel with coal/refuse derived fuel in a fluidized bed reactor. Waste Management31: 1176–1183.
43.
WangYLiXMourantD. (2012) Formation of aromatic structures during the pyrolysis of bio-oil. Energy Fuels26: 241.
44.
WuCFBudarinVLGronnowMJ. (2014) Conventional and microwave-assisted pyrolysis of biomass under different heating rates. Journal of Analytical and Applied Pyrolysis107: 276–283.
45.
YangJZhangP (2013) Depth-dependent positron annihilation in different polymers. Applied Surface Science280: 109–112.
