The influences of temperature and residence times on the conversion and product distribution during hydrothermal carbonisation of municipal solid wastes were investigated. Analysis of variance and reaction severity were used to comprehensively analyse the experimental results. Analysis results showed both reaction temperature and residence time had varying degrees of impact on production distribution and hydrochars characteristic, while the effect of combine temperature and time was negligible. It is novel to find that the products yield was a linear function of the logarithm of the reaction ordinate. Base on comprehensive consideration, 240 °C to 260 °C and 50 min to 60 min would be the optimised reaction region to achieve relatively better economic benefits for hydrothermal carbonisation of municipal solid waste. By employing the analysis results and estimated models of high heating value and solid yield established in this article, predicting the product characteristics that have not been explored experimentally become possible.
AreeprasertCZhaoPMaD. (2014) Alternative solid fuel production from paper sludge employing hydrothermal treatment. Energy & Fuels28: 1198–1206.
2.
AssamoiBLawryshynY (2012) The environmental comparison of landfilling vs. incineration of MSW accounting for waste diversion. Waste Management32: 1019–1030.
3.
BachQ-VTranK-QKhalilRA. (2013) Comparative assessment of wet torrefaction. Energy & Fuels27: 6743–6753.
4.
BassoDPatuzziFCastelloD. (2016) Agro-industrial waste to solid biofuel through hydrothermal carbonization. Waste Management47: 114–121.
5.
BassoDWeiss-HortalaEPatuzziF. (2015a) Hydrothermal carbonization of off-specification compost: A byproduct of the organic municipal solid waste treatment. Bioresource Technology182: 217–224.
6.
BassoDWeiss-HortalaEPatuzziF. (2015b) Hydrothermal carbonization of off-specification compost: A byproduct of the organic municipal solid waste treatment. Bioresource Technology182: 217–224.
7.
De FeoGMalvanoC (2012) Technical, economic and environmental analysis of a MSW kerbside separate collection system applied to small communities. Waste Management32: 1760–1774.
8.
Deb-ChoudhurySHainesSHarlandD. (2014) Effect of cooking on meat proteins: Mapping hydrothermal protein modification as a potential indicator of bioavailability. Journal of Agricultural and Food Chemistry62: 8187–8196.
9.
FaethJLValdezPJSavagePE (2013) Fast hydrothermal liquefaction of Nannochloropsis sp. to produce biocrude. Energy & Fuels27: 1391–1398.
10.
Gaeta-BernardiAParenteV (2016) Organic municipal solid waste (MSW) as feedstock for biodiesel production: A financial feasibility analysis. Renewable Energy86: 1422–1432.
11.
GuoSDongXWuT. (2015) Characteristic evolution of hydrochar from hydrothermal carbonization of corn stalk. Journal of Analytical and Applied Pyrolysis116: 1–9.
12.
HeCGiannisAWangJ-Y (2013) Conversion of sewage sludge to clean solid fuel using hydrothermal carbonization: Hydrochar fuel characteristics and combustion behavior. Applied Energy111: 257–266.
13.
JinYLuLMaX. (2013) Effects of blending hydrothermally treated municipal solid waste with coal on co-combustion characteristics in a lab-scale fluidized bed reactor. Applied Energy102: 563–570.
14.
KamboHSDuttaA (2014) Strength, storage, and combustion characteristics of densified lignocellulosic biomass produced via torrefaction and hydrothermal carbonization. Applied Energy135: 182–191.
15.
KimDLeeKParkKY (2014) Hydrothermal carbonization of anaerobically digested sludge for solid fuel production and energy recovery. Fuel130: 120–125.
16.
KoJHLiMYangF. (2015) Impact of MSW compression on methane generation in decelerated methanogenic phase. Bioresource Technology192: 540–546.
17.
KwonEECastaldiMJ (2012) Urban energy mining from municipal solid waste (MSW) via the enhanced thermo-chemical process by carbon dioxide (CO2) as a reaction medium. Bioresource Technology125: 23–29.
18.
LiXLiM-FBianJ. (2015) Hydrothermal carbonization of bamboo in an oxalic acid solution: Effects of acid concentration and retention time on the characteristics of products. Royal Society of Chemistry Advances5: 77147–77153.
19.
LinYMaXPengX. (2015) Effect of hydrothermal carbonization temperature on combustion behavior of hydrochar fuel from paper sludge. Applied Thermal Engineering91: 574–582.
20.
LinYMaXPengX. (2016) Combustion, pyrolysis and char CO2-gasification characteristics of hydrothermal carbonization solid fuel from municipal solid wastes. Fuel181: 905–915.
21.
LuLNamiokaTYoshikawaK (2011) Effects of hydrothermal treatment on characteristics and combustion behaviors of municipal solid wastes. Applied Energy88: 3659–3664.
22.
LuXBergeND (2014) Influence of feedstock chemical composition on product formation and characteristics derived from the hydrothermal carbonization of mixed feedstocks. Bioresource Technology166: 120–131.
23.
LuYLevineRBSavagePE (2015) Fatty acids for nutraceuticals and biofuels from hydrothermal carbonization of microalgae. Industrial & Engineering Chemistry Research54: 4066–4071.
24.
MäkeläMBenaventeVFullanaA (2015) Hydrothermal carbonization of lignocellulosic biomass: Effect of process conditions on hydrochar properties. Applied Energy155: 576–584.
25.
MakelaMBenaventeVFullanaA (2016) Hydrothermal carbonization of industrial mixed sludge from a pulp and paper mill. Bioresource Technology200: 444–450.
26.
ParshettiGKKent HoekmanSBalasubramanianR (2013) Chemical, structural and combustion characteristics of carbonaceous products obtained by hydrothermal carbonization of palm empty fruit bunches. Bioresource Technology135: 683–689.
27.
RománSNabaisJMVLaginhasC. (2012) Hydrothermal carbonization as an effective way of densifying the energy content of biomass. Fuel Processing Technology103: 78–83.
28.
SabioEAlvarez-MurilloARomanS. (2016) Conversion of tomato-peel waste into solid fuel by hydrothermal carbonization: Influence of the processing variables. Waste Management47: 122–132.
29.
SinghRPTyagiVVAllenT. (2011) An overview for exploring the possibilities of energy generation from municipal solid waste (MSW) in Indian scenario. Renewable and Sustainable Energy Reviews15: 4797–4808.
30.
SmithRLSenguptaDTakkellapatiS. (2015) An industrial ecology approach to municipal solid waste management: II. Case studies for recovering energy from the organic fraction of MSW. Resources, Conservation and Recycling104: 317–326.
31.
TanSTHoWSHashimH. (2015) Energy, economic and environmental (3E) analysis of waste-to-energy (WTE) strategies for municipal solid waste (MSW) management in Malaysia. Energy Conversion and Management102: 111–120.
32.
WangJChengGYouY. (2012) Hydrogen-rich gas production by steam gasification of municipal solid waste (MSW) using NiO supported on modified dolomite. International Journal of Hydrogen Energy37: 6503–6510.
33.
XiaoL-PShiZ-JXuF. (2012) Hydrothermal carbonization of lignocellulosic biomass. Bioresource Technology118: 619–623.
34.
ZhangDQTanSKGersbergRM (2010) Municipal solid waste management in China: Status, problems and challenges. Journal of Environmental Management91: 1623–1633.
35.
ZhangLWangQWangB. (2015) Hydrothermal carbonization of corncob residues for hydrochar production. Energy & Fuels29: 872–876.
36.
ZhaoPShenYGeS. (2014) Clean solid biofuel production from high moisture content waste biomass employing hydrothermal treatment. Applied Energy131: 345–367.
37.
ZhengAJiangLZhaoZ. (2016) Effect of hydrothermal treatment on chemical structure and pyrolysis behavior of eucalyptus wood. Energy & Fuels30: 3057–3065.
38.
ZhengLSongJLiC. (2014) Preferential policies promote municipal solid waste (MSW) to energy in China: Current status and prospects. Renewable and Sustainable Energy Reviews36: 135–148.
39.
ZhouHLongYMengA. (2015) Classification of municipal solid waste components for thermal conversion in waste-to-energy research. Fuel145: 151–157.
40.
ZhouHMengALongY. (2014) An overview of characteristics of municipal solid waste fuel in China: Physical, chemical composition and heating value. Renewable and Sustainable Energy Reviews36: 107–122.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
