Although corona electrostatic separation is successfully used in recycling waste printed circuit boards in industrial applications, there are problems that cannot be resolved completely, such as nonmetal particle aggregation and spark discharge. Both of these problems damage the process of separation and are not easy to identify during the process of separation in industrial applications. This paper provides a systematic study on a real-time monitoring system. Weight monitoring systems were established to continuously monitor the separation process. A Virtual Instrumentation program written by LabVIEW was utilized to sample and analyse the mass increment of the middling product. It includes four modules: historical data storage, steady-state analysis, data computing and alarm. Three kinds of operating conditions were used to verify the applicability of the monitoring system. It was found that the system achieved the goal of monitoring during the separation process and realized the function of real-time analysis of the received data. The system also gave comprehensible feedback on the accidents of material blockages in the feed inlet and high-voltage spark discharge. With the warning function of the alarm system, the whole monitoring system could save the human cost and help the new technology to be more easily applied in industry.
DascalescuLSamuilaAMihalcioiuA. (2005) Robust design of electrostatic separation processes. IEEE Trans Ind Appl41(3): 715–720
2.
DegeratuD (2012) Quantitative determining of Cu, Ag, Au and Pt from electrical and electronic waste. Metalurgia Int17(1): 72.
3.
FangWYangYXuZ (2013) PM10 and PM2.5 and health risk assessment for heavy metals in a typical factory for cathode ray tube television recycling. Environ Sci Technol47(21): 12469–12476.
4.
FuRongXYingyingQFuShenZ (2013) Recovery of metals from waste printed circuit boards by supercritical water pre-treatment combined with acid leaching process. Waste Manage33(5): 1251–1257.
5.
HuangZYXieFCMaY (2011) Ultrasonic recovery of copper and iron through the simultaneous utilization of Printed Circuit Boards (PCB) spent acid etching solution and PCB waste sludge. J Hazard Mater185(1): 155–161.
6.
JaeryeongLYoungjinKJaechunL (2012) Disassembly and physical separation of electric/electronic components layered in printed circuit boards (PCB). J Hazard Mater241–242: 387–394.
7.
LehnerT (1998) Integrated recycling of non-ferrous metals at Boliden Ltd, Rönnskär Smelter. In: IEEE international symposium on electronics & the environment, pp.42–47.
8.
LeungAOWLuksemburgWJWongAS. (2007) Spatial distribution of polybrominated diphepyl ethers and polychlorinated dibenzo-p-dioxins and dibenzofurans in soil and combusted residue at Guiyu, an electronic waste recycling site in southeast China. Environ Sci Technol41(8): 2730–2737.
9.
LiJLuHGuoJ. (2007b) Recycle technology for recovering resources and products from waste printed circuit boards. Environ Sci Technol41(6): 1995–2000.
10.
LiJLuHGuoJ. (2008c) Optimizing the operating parameters of corona electrostatic separation for recycling waste scraped printed circuit boards by computer simulation of electric field. J Hazard Mater153(1-2): 269–275.
11.
LiJLuHXuZ. (2008b) Critical rotational speed model of the rotating roll electrode in corona electrostatic separation for recycling waste printed circuit boards. J Hazard Mater154(1-3): 331–336.
12.
LiJXuZ (2010) Environmental friendly automatic line for recovering waste printed circuit boards. Environ Sci Technol44(4): 1418–1423.
13.
LiJXuZZhouY (2007a) Application of corona discharge and electrostatic force to separate metals and nonmetals from crushed particles of waste printed circuit boards. J Electrostat65(4): 233–238.
14.
LiJXuZZhouY (2008a) Theoretic model and computer simulation of separating mixture metal particles from waste printed circuit board by electrostatic separator. J Hazard Mater153(3): 1308–1313.
15.
LiJXuZZhouY (2008d) A model for computing the trajectories of the conducting particles from waste printed circuit boards in corona electrostatic separators. J Hazard Mater151(1): 52–57.
16.
LuHLiJGuoJ. (2006) Electrostatics of spherical metallic particles in cylinder electrostatic separators/sizers. J Phys D Appl Phys39(18): 4111–4115.
17.
LuHLiJGuoJ. (2008a) Movement behavior in electrostatic separation: recycling of metals materials from waste printed circuit board. J Mater Process Tech197(1-3): 101–108.
18.
LuHLiJGuoJ. (2008b) Dynamics analysis of spherical metallic particles in cylinder electrostatic separators/ purifiers. J Hazard Mater156(1-3): 74–79.
19.
MedlesKSenouciKTilmatineA. (2009) Capability evaluation and statistic control of electrostatic separation processes. IEEE Trans Ind Appl45(3): 1086–1094.
20.
MedlesKTilmatineAMilouaF. (2007) Set point identification and robustness testing of electrostatic separation processes. IEEE Trans Ind Appl43(3): 618–626.
21.
MihalcioiuANeamtuVStochitaA. (2007) High-voltage monitoring in electrostatic separators, IEEE Trans Ind Appl43(1): 224–231.
22.
QinYWuJZhouQ. (2009) Quadratic non-linear models for optimizing electrostatic separation of crushed waste printed circuit boards using response surface methodology. J Hazard Mater167(1-3): 1038–1043.
23.
SenouciKBendaoudAMedlesK. (2010) Statistic control of electrostatic separation processesIEEE Ind Appl Mag16(4): 22–27.
24.
SenouciKBendaoudATilmatineA. (2009) Multivariate statistical process control of electrostatic separation processes. IEEE Trans Ind Appl45(3): 1079–1085.
25.
SenouciKMedlesKDascalescuL (2013) Effective solutions for monitoring the electrostatic separation of metals and plastics granular waste from electric and electronic equipment. Waste Manag Res31(2): 160–168.
26.
VinodKJaechunLJinkiJ. (2013) Novel physical separation process for eco-friendly recycling of rare and valuable metals from end-of-life DVD-PCBs. Sep Purif Technol111: 145–154.
27.
WuJLiJXuZ (2008) Optimization of key factors of the electrostatic separation for crushed PCB wastes using roll-type separator. J Hazard Mater154(1-3): 161–167.
28.
WuJQinYZhouQ. (2009) Impact of nonconductive powder on electrostatic separation for recycling crushed waste printed circuit board. J Hazard Mater164(2-3): 1352–1358.
29.
XueMYangYRuanJ. (2012) Assessment of noise and heavy metals (Cr, Cu, Cd, Pb) in the ambience of the production line for recycling waste printed circuit boards. Environ Sci Technol46(1): 494–499.
30.
ZhouYHQiuKQ (2010) A new technology for recycling materials from waste printed circuit boards. J Hazard Mater175(1-3): 823–828.
31.
ZhuPChenYWangLY. (2012) A new technology for separation and recovery of materials from waste printed circuit boards by dissolving bromine epoxy resins using ionic liquid. J Hazard Mater239–240: 270–278.
32.
ZhuPChenYWangLY. (2013)The separation of waste printed circuit board by dissolving bromine epoxy resin using organic solvent. Waste Manage33(2): 484–488.
