In this study, the catalytic pyrolysis of waste furniture sawdust in the presence of ZSM-5, H-Y and MCM-41 (10 wt % of the biomass sample) was carried out in order to increase the quality of the liquid product at the various pyrolysis temperatures of 400, 450, 500 and 550oC. In the non-catalytic work, the maximum oil yield was obtained as 42% at 500oC in a fixed-bed reactor system. In the catalytic work, the maximum oil yield was decreased to 37.48, 30.04 and 29.23% in the presence of ZSM-5, H-Y and MCM-41, respectively. The obtained pyrolysis oils were analyzed by various spectroscopic and chromatographic techniques. It was determined that the use of a catalyst decreased acids and increased valuable organics found in the bio-oil. The removal of oxygen from bio-oil was confirmed with the results of the elemental analysis and gas chromatography-mass spectrometry.
AntonakouELappasANilsenMH. (2006) Evaluation of various types of Al-MCM-41 materials as catalysts in biomass pyrolysis for the production of bio-fuels and chemicals. Fuel85: 2202–2212.
2.
ASTM Standard Test Method for Proximate Analysis of Wood Fuels, Easton, M.D., USA, E870–82, (2013).
3.
ASTM, Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels, Easton, M.D., USA, E873–82, (2013).
4.
BridgwaterAV (1996) Production of high grade fuels and chemicals from catalytic pyrolysis of biomass. Catalysis Today29: 285.
5.
IliopoulouEFAntonakouEVKarakouliaSA. (2007) Catalytic conversion of biomass pyrolysis products by mesoporous materials: Effect of steam stability and acidity of Al-MCM-41 catalysts. Chemical Engineering Journal134: 51–57.
6.
JacksonMAComptonDLBoatengA (2011) Screening acidic zeolites for catalytic fast pyrolysis of biomass and its components. Journal of Analytical and Applied Pyrolysis92: 224–232.
7.
KanmazG (2011) Catalytic Pyrolysis of Pine Sawdust and Characterization of Pyrolysis Oils. MSc Thesis, Department of Chemical Engineering, Anadolu University, Eskisehir, Turkey.
8.
LiSXuSLiuS. (2004) Fast pyrolysis of biomass in free-fall reactor for hydrogen-rich gas. Fuel Processing Technology85: 1201–1211.
9.
MihalcikDJMultenCABoatengAA (2011) Screening acidic zeolites for catalytic fast pyrolysis of biomass and its components. Journal of Analytical and Applied Pyrolysis92: 224–232.
10.
NilsenMHAntonakouEBouzgaA. (2007) Investigation of the effect of metal sites in Me–Al-MCM-41 (Me=Fe, Cu or Zn) on the catalytic behavior during the pyrolysis of wooden based biomass. Microporous and Mesoporous Materials105: 189–203.
11.
PütünEUzunBBPütünAE (2009) Rapid pyrolysis of olive residue. 2. Effect of catalytic upgrading of pyrolysis vapors in a two-stage fixed-bed reactor. Energy and Fuels23: 2248–2258.
12.
SeoYHLeeKHShinDH (2003) Investigation of catalytic degradation of high-density polyethylene by hydrocarbon group type analysis. Journal of Analytical and Applied Pyrolysis70: 383–398.
13.
SınağAUskanBGülbayS (2010) Characterization of the pyrolytic liquids obtained by pyrolysis of sawdust. Journal of Analytical and Applied Pyrolysis51: 48–52.
14.
TorriCLesciIGFabbriD (2009) Analytical study on the pyrolytic behaviour of cellulose in the presence of MCM-41 mesoporous materials. Journal of Analytical and Applied Pyrolysis85: 192–196.
15.
UzunBBKanmazG (2013) Effect of operating parameters on bio-fuel production from waste furniture sawdust. Waste Management and Research31: 361–367.
16.
UzunBBSarıoğluN (2009) Rapid and catalytic pyrolysis of corn stalks. Fuel Processing Technology90: 705–716.
17.
UzunBBPutunAEPutunE (2007a) Rapid pyrolysis of olive residue. 1. Effect of heat and mass transfer limitations on product yields and bio-oil compositions. Energy and Fuels21: 1768–1776.
18.
UzunBBPütünEPütünAE (2007b) Composition of products obtained via fast pyrolysis of olive-oil residue: Effect of pyrolysis temperature. Journal of Analytical and Applied Pyrolysis79: 147–153.
19.
WangDXiaoRZhangH. (2010a) Comparison of catalytic pyrolysis of biomass with MCM-41 and CaO catalysts by using TGA–FTIR analysis. Journal of Analytical and Applied Pyrolysis9: 171–177.
20.
WangPZhanSYuH. (2010b) The effects of temperature and catalysts on the pyrolysis of industrial wastes (herb residue). Bioresource Technology1013: 236–3241.
21.
WilliamsPTHornePA (1995) The influence of catalyst type on the composition of upgraded biomass pyrolysis oils. Journal of Analytical and Applied Pyrolysis31–39.
