The huge number of research studies carried out during recent decades focused on finding an effective solution for the waste treatment, have allowed some of these residues to become new raw materials for many industries. Achieving this ensures a reduction in energy and natural resources consumption, diminishing of the negative environmental impacts and creating secondary and tertiary industries. A good example is provided by the metallurgical industry, in general, and the aluminium industry in this particular case. The aluminium recycling industry is a beneficial activity for the environment, since it recovers resources from primary industry, manufacturing and post-consumer waste. Slag and scrap which were previously considered as waste, are nowadays the raw material for some highly profitable secondary and tertiary industries. The most recent European Directive on waste establishes that if waste is used as a common product and fulfils the existing legislation for this product, then this waste can be defined as ‘end-of-waste’. The review presented here, attempts to show several proposals for making added-value materials using an aluminium residue which is still considered as a hazardous waste, and accordingly, disposed of in secure storage. The present proposal includes the use of this waste to manufacture glass, glass-ceramic, boehmite and calcium aluminate. Thus the waste might effectively be recovered as a secondary source material for various industries
AlfaroI (1996) La industria del aluminio y el medio ambiente. Residuos (Bilbao)29: 69–74.
2.
AlfaroI (1997) El reciclado total del aluminio y de su óxido (y II parte); Fundidores (Madrid)55: 32–34.
3.
AlfaroIBallhordR (1997) The applications of aluminium oxide obtained from the recycling of aluminium. In: AlfaroI (ed.), Proceedings of the Third International Conference on Recycling of Metals, Barcelona. ASM International Europa. Brussels405–419.
BernardoEVarrassoMCadamuroFHreglichS (2006) Vitrification of wastes and preparation of chemically stable sintered glass–ceramic products. Journal of Non-Crystalline Solids352: 4017–4023.
6.
CormierLNeuvilleDRCalasG (2000) Structure and properties of low-silica calcium aluminosilicate glasses. Journal of Non-Crystalline Solids274: 110–114.
7.
Council Directive (1994) Council Directive of 12.12.1991 on Hazardous Waste 91/689/EEC, Council Directive 94/31/CE of 27. 6. 1994 amending Directive/91/689/EEC. 1994. Official Journal L 377, Brussels.
8.
DonatelloSTyrerMCheesemanCR (2010) EU landfill waste acceptance criteria and EU hazardous Waste Directive compliance testing of incinerated sewage sludge ash. Waste Management30: 63–71.
9.
EI-KatatnyEAHalawySAMohamedMAZakiMI (2000), Recovery of high surface area alumina from aluminiun dross tailings. Journal of Chemical Technology and Biotechnology75: 394–402.
10.
ED (European Directive) (1979) Dangerous Substances Directive (67/548/EEC), later amending by Directive 79/831/EEC ‘relating to the classification, packaging and labelling of dangerous substances’. Official Journal L 259. Brussels.
11.
ED (European Directive) (1999) Council Storage Directive 99/31/CE on the landfill of waste. Official Journal L 192, Brussels.
12.
ED (European Directive) (2008) of the European parliament and of the council on waste and repealing certain Directives 2008/98/EC. Official Journal L312. Brussels.
13.
Fernández NavarroJM (1991) Fundamentos de la fabricación del vidrio. El Vidrio: 127-329. Consejo superior de Investigaciones Científicas, Madrid, España.
14.
GakiAChrysafiRKakaliG (2007) Chemical synthesis of hydraulic calcium aluminate compounds using the Pechini technique. Journal of European Ceramic Society27: 1781–1784.
15.
Gonzalo-DelgadoL (2008) Obtención y caracterización de boehmita a partir de un residuo de aluminio. Available at: http://digital.csic.es/handle/10261/6195 (accessed 24 July 2008).
16.
Gonzalo-DelgadoLLópez-DelgadoALópezFALópez-AndrésS (2010) Mayenita: aluminato cálcico sintetizado a partir de un residuo peligroso de aluminio. Macla13: 115–116.
17.
Gonzalo-DelgadoLLópez-DelgadoALópezFAAlguacilFJLópez-AndrésS (2011) Recycling of hazardous waste from tertiary aluminium industry in a value-added material. Waste Management & Research29: 127–134.
18.
GracianoDRinJNDanielsEJ (1996) In: The Economics of Salt Cake Recycling. Warrendale, PA: Light Metals, Materials Society, 1255–1260.
19.
Guías Tecnológicas (1996) Directiva 96/61 relativa a la prevención y control integrados de la contaminación, Epígrafe 2.5, Metalurgia del aluminio. Available at: http://www.eper-es.com/pdfs/guia%20aluminio.pdf (accessed 1 September 2009).
20.
GülgünMAPopoolaOOKrivenWM (1994) Chemical synthesis and characterization of calcium aluminate powders. Journal of the American Ceramic Society77: 531–539.
21.
HidalgoAGarciaJLAlonsoMCFernándezLAndradeC (2009) Microstructure development in mixes of calcium aluminate cement with silica fume or fly ash. Journal of Thermal Analysis and Calorimetry96: 335–345.
22.
HigbyPLGintherRJAggarwalIDFriebeleEJ (1990) Glass formation and thermal properties of low-silica calcium aluminosilicate glasses. Journal of Non-Crystalline Solids126: 209–215.
23.
Hoo-InLHyung-KyuPEui-PakY (2001) Process for recycling waste aluminum dross. Patent US6296817
24.
HughesJP (ed) (1981) Health Protection in Primary Aluminium Productionvol. 2. Seminar, Sept. 1981. New Zealand: International Primary Aluminium Institute, 207.
25.
IAI (International Aluminium Institute) (2010) IAI. Available at: www.worldaluminium.org (accessed 2 February 2010).
26.
IARC (1987) IARC Monographs on the Evaluation of Carcinogenic Risks to Humans. 89–91, Supplement 7.
27.
IPPC Directive (1996) Integrated Pollution Prevention and Control Directive. Reference document on best available techniques in non ferrous metals industries, IPPC Directive European Commission. Official Journal L257. Brussels
28.
KimHJLeeHCRheeCH. (2003) Alumina nanotubes containing lithium of high ion mobility. Journal of the American Chemical Society125: 13354–13355.
29.
KimYLeeSMParkCSLeeSILeeMY (1997) Substrate dependence on the optical properties of Al2O3 films grown by atomic layer deposition. Applied Physics Letters71: 3604–3606.
LiWYMitchellBS (1999) Nucleation and crystallization in calcium aluminate glasses. Journal of Non-Crystalline Solids255: 199–207.
33.
LiYLiuJJiaZ (2006) Fabrication of boehmite AlOOH nanofibers by a simple hydrothermal process. Materials Letters60: 3586–3590.
34.
LiuYMaDHanX. (2008) Hydrothermal synthesis of microscale boehmite and gamma nanoleaves alumina. Materials Letters62: 1297–1301.
35.
LópezFASáinzEFormosoA (1994) Recovery of alumina from salts slags in aluminium remelting. Canadian Metalurgical Quarterly33: 29–33.
36.
LópezFASáinzELópez-DelgadoAPascualLFernández-NavarroJM (1996) The use of blast furnace slag and derived materials in the vitrification of electric arc furnace dust. Metallurgical and Materials Transactions B27B: 379–384.
37.
LópezFAPeñaMCLópez-DelgadoA (2001) Hydrolysis and heat treatment of aluminium dust. Journal of the Air & Waste Management Association51: 903–912.
38.
López-DelgadoAMedinaJAlonsoPTayibiHPérezCLópezFA (2005) Estudio del comportamiento térmico del polvo de aluminio estabilizado con el yeso. Revista De MetalurgiaExtr.: 330–334.
39.
López-DelgadoATayibiHLópezFA (2007) Treatments of aluminium dust: a hazardous residue from secondary aluminium industry. In: MasonLG (ed.) Focus on Hazardous Materials Research. New York: Nova Publishers, 1–52.
40.
López-DelgadoAJiménezJAAlguacilFJLópezFA (2008) Obtención de vitroceramicos a partir de un residuo de aluminio y caracterización mediante DRX. In: XLVIII Congreso Anual de la Sociedad Española de Cerámica y Vidrio. Oviedo (Asturias) Octubre. Available at: http://hdl.handle.net/10261/8191 (accessed 4 November 2008).
41.
López-DelgadoATayibiHPérezCAlguacilFJLópezFA (2009) A hazardous waste from secondary aluminium metallurgy as a new raw material for calcium aluminate glasses. Journal of Hazardous Materials165: 180–186
42.
López-DelgadoALópezFAGonzalo-DelgadoLLópez-AndrésSAlguacilFJ (2010) Study by DTA/TG of the formation of calcium aluminate obtained from an aluminium hazardous waste. Journal of Thermal Analysis and Calorimetry99: 999–1004.
43.
López-GómezFALópez-DelgadoA (2004) Procedimiento de estabilización/compactación de polvos de aluminio, Spanish patent n° ES2197797B1.
44.
MalviyaRChaudharyR (2006) Factors affecting hazardous waste solidification/stabilization: a review. Journal of Hazardous MaterialsB137: 267–276.
45.
MishraDAnandSPandaRKDasRP (2000) Hydrothermal preparation and characterization of boehmites. Materials Letters42: 38–45.
46.
MorrisELPickensJW (2001) Process for preparing calcium aluminate from aluminium dross. US patent US6238633.
47.
MusicSDragcevicDPopovicSVdovicN (1998) Microstructural properties of boehmite formed under hydrothermal conditions. Materials Science and Engineering B52: 145–153.
48.
NecipÜDrouetMG (2002) Comparison of salt-free aluminium dross treatment processes. Resources, Conservation and Recycling36: 61–72.
49.
OEA (2010) Organization of European Aluminium Refiners and Remelters. Available at: www.oea-alurecycling.org (accessed 8 January 2010).
50.
OkadaKNagashimaTKameshimaYYasumoriATsukadaT (2002) Relationship between formation conditions, properties, and crystallite size of boehmite. Journal of Colloid and Interface Science253: 308–314.
51.
PalvikA (1993) Recovery of salts from aluminium slags. Information Chimie. 354: 124–125.
52.
PereiraDABarroso de Aguiar FCAlmeidaMFLabrinchaJA (2000) Mechanical behaviour of Portland cement mortars with incorporation of Al-containing salt slags. Cement and Concrete Research30: 1131–1138.
53.
RaabBPöllmannH (2008) Investigations of calcium aluminate compounds by different synthesis methods In: Proceedings of the 9th Conference of Applied Mineralogy. Brisbane (Australia). Australasian Institute of Mining and Metallurgy. Brisbane. 245–253.
54.
RajaRYogeshwarS (1998) The role of SALT flux in recycling of aluminum. In: WelchB (ed.) Light Metals. San Antonio Texas: The Minerals, Metals & Materials Society, 1237–1243.
55.
RaybaudPDigneMIftimieRWellensWEuzenPToulhoatH (2001) Morphology and surface properties of boehmite (γ-AlOOH): a density functional theory study. Journal of Catalysis201: 236–246.
56.
RomeroMRawlingsRDRincónJM (1999) Development of a new glass-ceramic by means of controlled vitrification and crystallization on inorganic wastes from urban incineration. Journal of the European Ceramic Society19: 2049–2058.
57.
SaggeseSJHarringtonJA (1993) Calcium-aluminate glass for use as n < 1 hollow wave guides in the delivery of CO2 laser energy. Optical Materials2: 119–123.
58.
ScarinciGBrusantinGBarvieriL. (2000) Vitrification of industrial and natural wastes with production of glass fibers. Journal of the European Ceramic Society20: 2485–2490.
59.
ShinzatoMCHypolitoR (2005) Solid waste from aluminium recycling process: characterization and reuse of its economically valuable constituents. Waste Management25: 37–46.
60.
SittingM (1975) Resources Recovery and Recycling Handbook of Industrial Wastes. New York, USA: Noyes Data Corporation.
61.
SteinW (1996) Method for treating wet wastes containing metallic aluminium with dry powdered material for recycling to steelmaking. Patent DE 96-19627550.
62.
TasAC (1998) Chemical preparation of the binary compounds in the calcia-alumina system by self-propagating combustions synthesis. Journal of the American Ceramic. Society81: 2853–2863.
63.
TayibiHPérezCLópezFALópez-DelgadoA (2005) Evolución de las propiedades mecánicas de un residuo de la metalurgia secundaria del aluminio estabilizado con yeso. Revista de Metalurgia41: 280–285.
64.
TsukadaTSeqawaHYasumoriAOkadaK (1999) Crystallinity of boehmite and its effect on the phase transition temperature of alumina. Journal of Materials Chemistry9: 549–553.
65.
ÜnlüNDrouetMG (2002) Comparison of salt-free aluminium dross treatment processes. Resources, Conservation and Recycling36: 61–72.
66.
US EPA (US Environmental Protection Agency) (1980) Definition of Hazardous Waste, EPA/40 CFR/Part. 261.3, Federal Register. Available at: http://www.epa.gov/wastes/hazard/dsw/ (accessed 14 July 2009).
67.
VilandJS (1990) A secondary’s view of recycling. In: Recycling of Metals and Engineered Materials. San Antonio, Texas: The Minerals, Metals and Materials Society, 427.
68.
WeberJKRTangemanJAKeyTS. (2002) Novel synthesis of calcium oxide-aluminium oxide glasses. Japanese Journal of Applied Physics41(5A): 3029–3030.
69.
WFD (1975) Waste Framework Directive. Council Directive 75/442/EEC. Official Journal L194. Brussels.
