Processed sandy residue generated from mixed construction and demolition waste (mixed C&D-W) was investigated for possible deposition in landfill. The basic properties and the components removed in the loss on ignition (LOI) test were examined. The target material for decreasing LOI was elucidated and the validity of LOI used as landfill standard for inert industrial solid waste was discussed. LOI of most of the samples was above 5% and therefore, in principle, processed sandy residue should not be deposited in inert-type landfill. As LOI of sandy residue was mainly due to bound water, the LOI could not be decreased to below 5% even if wood, which is the major organic matter in the sandy residue, was removed. However, decreasing the amount of wood could lead to a subsequent decrease in the amount of dissolved organic matter. Therefore, the LOI of processed mixed C&D-W used as landfill standard for inert industrial solid waste should be re-evaluated.
Bianchini, G., Marrocchino, E., Tassinari, R. & Vaccaro, C. ( 2005) Recycling of construction and demolition waste materials: a chemicalmineralogical appraisal. Waste Management, 25, 149-159.
2.
Hanashima, M., Matsufuji, Y., Nagano, S., Yanase, R. & Hirata, T. ( 1988) Soil mechanics characteristics of solid waste. Journal of Japan Waste Management Association, 41, 148-167 (in Japanese).
3.
Izzo, R.L., Mahler, C.F., Munnich, K. & Bauer, J. ( 2007) Perspectives of MBT waste used as a capillary barrier in a sanitary landfill. Sardinia2007, CD-ROM.
4.
Japan ME(Ministry of Environment in Japan) (1999) Proper Treatment of Waste Generated by Building and/or Demolition Work. Ministry of Environment , Tokyo, Japan (in Japanese). (Accessed 1 March 2008).
5.
Japan ME(Ministry of Environment in Japan) (2003) The Basic Program for Establishing the Recycling-based Society. Ministry of Environment, Tokyo, Japan (in Japanese). http://www.env.go.jp/recycle/circul/keikaku/all.pdf (accessed: 1 March 2008).
6.
Japan ME(Ministry of Environment in Japan) (2006) Processing of Waste Gypsum Board from which Paper is Removed. Ministry of Environment, Tokyo, Japan (in Japanese). (Accessed 1 March 2008).
7.
Japan ME(Ministry of Environment in Japan) (2007) Annual Report of Generation and Treatment of Industrial Solid Waste in Japan. Ministry of Environment, Tokyo, Japan (in Japanese).
8.
Japan ML(Ministry of Land, Infrastructure, Transport and Tourism in Japan) (2006) Annual Report of a Residual Product of Construction on the Actual Condition . Ministry of Land, Infrastructure, Transport and Tourism , Tokyo, Japan (in Japanese). http://www.env.go.jp/recycle/circul/keikaku/all.pdf (accessed: 1 March 2008).
9.
Kallel, A., Tanaka, N. & Matsuto, T. ( 2004) Gas permeability and tortuosity for packed layers of processed municipal solid wastes and incinerator residue. Waste Management & Research, 22, 186-194.
10.
Kobe, H. ( 1982) Thermal Analysis. Kodansha, Tokyo, Japan (in Japanese).
11.
Lategano, E., Costa, G., Lombardi, F. & Baciocchi, R. ( 2007) Characterization of the bottom ash produced in a sanitary waste incineration facility and influence of the operating conditions aimed at material recovery of safe disposal. Sardinia2007, CD-ROM.
12.
Mamiya, T., Takahashi, T., Takahashi, J. & Saito, S. ( 2006) Characteristics of mixed construction and demolition waste and treatment method. In Proc. of the 17th Annual Conference of the Japan Society of Waste Management Experts, pp. 515-517 (in Japanese). JSWM, Tokyo, Japan.
13.
Ono, Y. & Tanaka, N. ( 2003) Preventing hazardous-level generation of hydrogen sulfide gas in landfill sites: Possibilities and administrative criteria. Waste Management & Research, 14, 248-257 (in Japanese).
14.
Ono, Y. ( 2005) Situation of crushing and sorting facilities for construction and demolition wastes in Saitama Prefecture and survey of chemical substances in the sorted wastes. Environmental Science, 18, 623-634 (in Japanese).
15.
Park, J.S., Park, Y.J. & Heo, J. ( 2007) Solidification and recycling of incinerator bottom ash through the addition of colloidal silica (SiO2) solution. Waste Management, 27, 1207-1212.
16.
Sekito, T., Tanaka, N. & Matsuo, T. ( 1997) Characteristics of solid waste processing residues from municipal resource recovery facilities. Waste Management & Research, 8, 190-199 (in Japanese).
17.
Tojo, Y. ( 2002) Moisture Transfer and the Control Method at Landfill Site . PhD dissertation, Hokkaido University, Japan (in Japanese).
18.
Townsend, T., Tolaymat, T., Leo, K. & Jambeck, J. ( 2004) Heavy metals in recovered fines from construction and demolition debris recycling facilities in Florida. Science of the Total Environment, 332, 1-11.
19.
Tsuchida, D., Nakayama, H. & Shimaoka, T. ( 2006) Charge for landfill and recovery of environment at industrial solid waste landfill site. Proceedings of the 27th Annual Conference of the Japan Waste Management Association, pp. 302-304 (in Japanese). JWMA, Tokyo, Japan.
20.
Vegas, I., Ibanez, J.A., San Jose, J.T. & Urzelai, A. ( 2008) Construction demolition wastes, Waelz slag and MSWI bottom ash: A comparative technical analysis as material for road construction. Waste Management, 28, 565-574.
