Two industrial solid waste products generated by Indian coal-fired power plants, namely pond ash and fly ash, were used in combination with local clay to develop building bricks. The clay were mixed with the two different ashes in the range 10 to 90 wt.%, hydraulically pressed and fired at 1000°C. The fired products were characterized for various quality properties required for building bricks. The properties of the optimal compositions were compared with conventional red clay bricks including the developed microstructures and the comparative study generally showed that te ash-clay bricks were of superior quality to the conventional products.
Ayoko, G.A., Lim, M.C.H., Olofinjana, A. & Gilbert, D. (2005) Comparative assessment of Australian fly ash and convention concrete bricks. Journal of Chemical Technology andBiotechnology, 80, 259—267.
2.
Babcock and Wilcox Company. (1978) Steam. Its Generation and Use. Babcock and Wilcox Company , New York, USA.
3.
Ceramic Info: India (2002) Compiled by the Indian Ceramic Society, p. 36, Indian Ceramic Society, Kolkata, India.
4.
CGCRI Report. (2002) Development of Ash—clay Burnt Bricks Clay of Durgapur (West Bengal, India) and Fly Ash of DSP (West Bengal, India). CGCRI Report, CGCRI, Kolkata, India.
5.
Cicek, T. & Tanrýverdi, M. (2006) Lime based steam autoclaved fly ash bricks. Construction and Building Materials, 21, 1295—1300.
6.
Das, A.K. & Segaran, R.G. (2005) Review of fly ash brick making technologies. Journal of CAII (Coal Ash Institute of India), VII, 36—44.
7.
Das, S.K. (2005) Monograph on Ash—clay Burnt Brick, p. 33. Coal Ash Institute of India, Kolkata.
8.
Dasgupta, S.S. (2002) Fly ash utilization & MOEF Notification an overview. Key note address of Workshop on `Fly ash — manage it as resource not as waste', Raigarh , India.
9.
Jabolonski, G.L. and Tyron, S.S. (1998) Overview of coal combustion by product utilization . In Proc. of the 5th International Pittsburg Coal Conference , Pittsburg, University of Pittsburgh , Pittsburgh, USA.
10.
Kingery, W.D., Bowen, H.K. & Uhlmann, D.R. (1976) Introduction to Ceramics, 2nd edn. John Wiley and Sons, New York.
11.
Kumar, S. (2003) Fly ash—lime—phosphogypsum hollow blocks for walls and partitions. Building and Environment, 38, 291—295.
12.
Kumar, S. (2002) A perspective study on fly ash—lime—gypsum bricks and hollow blocks for low cost housing development. Construction and Building Materials, 16, 519—525.
13.
Lin, K.L. (2006) Feasibility study of using brick made from municipal solid waste incinerator fly ash slag. Journal of Hazardous Materials, 137, 1810—1816.
14.
Lingling, X., Wei, G., Tao, W. & Nanru Y. (2005) Study on fired bricks with replacing clay by fly ash in high volume ratio. Construction and Building Materials , 19, 243—247.
15.
Sarkar, R., Singh, N. & Das, S.K. (2005) Non-conventional utilization of fly ash: a review . In: Proc. of the Decennial Anniversary Exhibition and Symposium on `Fly ash as an emerging industrial material'. Organized by Coal Ash Institute of India, Kolkata, India.
16.
Singh, R.N. (2005) Need for fly ash management concern and achievement of NLC in fly ash management. Journal of Coal Ash Institute of India, VII, 12—22.
17.
Takegawa, T. (1996) Manufacture of bricks from fly ashes. Fuel and Energy Abstracts, 37, 213.
18.
Technical Advisory Report. (1988) Use of Coal Ash in Embankments and Bases. Federal Highway Administration, US Department of Transportation, T 5080.9, May 16, 1988.
19.
TIFAC Report (2005) Fly Ash Utilization Programme. Department of Science & Technology, Govt. of India, New Delhi.
