Foundry waste recycling in moulding operations and in the ceramic industry

Abstract

An industrial treatment was performed by the Sasil plant of Brusnengo (Biella, Northern Italy), which is part of the Gruppo Minerali S.p.A. (Novara, Northern Italy), to consider the reclamation of bentonite bonded moulding sands obtained from the Teksid Italia S.p.A. cast iron foundry plant in Crescentino (Vercelli, Northern Italy). An evaluation of the fine particles produced by the wet-mechanical regeneration treatment was made with the purpose of proposing their recycling as binding agents in moulding operations in the cast iron foundry and for the production of tiles in the ceramic industry. The pre-mixed product sold by bentonite suppliers (35% coal dust and 65% bentonite, 0.15 [UNKNOWN]/kg) could be made from the recovered fine fraction below 0.025 mm with the addition of active clay and coal dust, thus obtaining a product that will have physico-chemical properties similar to those of calcic bentonite. The improvements due to the addition of the fine particles to the usually employed clay for tile production were also underlined from the results of several baking tests.

The recovery and recycling of sands and fine particles obtained from the reclamation of bentonite moulding sands will lead to a saving of raw materials and landfill space, with economic and environmental advantages.

Keywords

Foundry wastes reclamation green sands bentonite bonded moulding sands black mineral coal dust wmr 602-3

Get full access to this article

View all access options for this article.

References

EPA (1981) Summary of factors affecting compliance by ferrous foundries, vol.1, EPA-340/1-80-020, pp. 34-49.

EPA (1997) Profile of the metal casting industry, EPA/310/R-97/004, pp. 15-22.

Fiore, S. , Zanetti, M.C. , Onofrio, M. (1999) Treatment process definition for the reuse of manufacturing dusts from metallurgical slugs, Proceedings of the Second National Congress Valorisation and Recycling of Industrial Wastes, L’Aquila, Italy, pp. 117-125.

Fiore, S. , Zanetti, M.C. (2001) Valorisation of fine particles coming from the treatment of green foundry sands, Proceedings of the Third International Congress Valorisation and Recycling of Industrial Wastes, L’Aquila, Italy, pp. 430-435.

Heine, H.J. (1983) Saving dollars through sand reclamation - Part 1, Foundry Management and Technology 111:5, pp. 22-25;

Lancellotta, R. (1993) Geotecnica, Ed. Zanichelli, Milano, Italy, pp. 1-20, 93-97.

Luther, N.B. (1997-98) Metal casting and molding processes vol.7, No.1 Casting Source Directory, pp. 29-35.

Tonda, E. , Zanetti, M.C. , Clerici, C. , Operto, M. (1997) Iron recovery from foundry wastes, Proceeding of the First National Congress Valorisation and Recycling of Industrial Wastes, L’Aquila, Italy, pp. 89-95.

Zanetti, M.C. , Clerici, C. , Sandrin, D. , Operto, M. (2000) Employment of foundry wastes, Proceedings of the XXI International Mineral Processing Congress, Roma, Italy, pp. C12a 9-14.

10.

Zanetti, M.C. , Giordanetto, L. , Clerici, C. (1999) Recovery of an old landfill: wastes treatment and recycle, Proceedings of Sardinia 1999, Seventh International Waste Management and Landfill Symposium, S. Margherita di Pula (CA), Italy, pp. 595-600.

11.

Zanetti, M.C. , Fiore, S. , Clerici, C. (2002) Reuse of foundry sands for cores and glass production, Journal of Solid Waste Technology and Management (first review: September 2002).