Investigation on the emission factors and removal efficiencies of heavy metals from MSW incinerators in Taiwan

Abstract

Two large-scale municipal waste incinerators (MWIs) equipped with different air pollution control devices (APCDs) were selected for conducting flue gas sampling and determination of heavy metals emissions including lead, zinc, cadmium, chromium, copper and mercury. In addition, the emission characteristics and removal efficiencies of heavy metals were evaluated via simultaneous sampling of flue gas upstream and downstream of APCDs. The average removal efficiency of particulate matter was 99.47%, and the removal efficiency of heavy metals could reach 95% or higher (except for Hg) for MWI-A. Preliminary results indicated that the average removal efficiency of particulate matter was 99.94%, and the removal efficiency of heavy metals could reach 98% or higher (except for Hg) for MWI-B. The average removal efficiencies of Hg for MWI-A and MWI-B were 47% and 30% respectively. The removal efficiencies achieved with existing APCDs were close to that reported in the US EPA document (AP-42) for MWIs. The average concentrations of heavy metals and particulate matter emitted from stack could meet current emission standards in Taiwan for both MWIs, but particulate matter, Pb and Cd concentrations of MWI-A were higher than the current emission regulations in Germany and the Netherlands.

Keywords

MSW (municipal solid waste)MWI (municipal waste incinerator)heavy metals APCD (air pollution control devices)emission factor removal efficiency wmr 469-4

Get full access to this article

View all access options for this article.

References

Brunner, P.H. & Monch, H. (1986) The flux of metals through municipal solid waste incineration. Waste Management & Research, 4, pp. 105-119.

Cianciarelli, D. , Leung, P.K. & Meadows, A. (1993) Selected emission measurement methods developed by the Pollution Measurement Division River Road Environmental Technology Centre Environment Canada. Municipal Waste Combustion, Proceedings of an International Specialty Conference, VIP-32, A&WMA, pp. 891-900.

Dhargalkar, P.H. & Goldbach, K. (1989) Control of heavy metal emissions from waste incinerator. J.M. Pacyna & B. Ottar (eds.), Control and Fate of Atmospheric Trace Metals, Dordrecht; Boston: Kluwer Academic, pp. 33-45.

Hasselriis, F. & Licata, A. (1996) Analysis of heavy metal emission data from municipal waste combustion. Journal of Hazardous Materials, 47, pp. 77-102.

Laudal, D.L. , Miller, S.J. , Heidt, M.K. & Schultz, R.L. (1995) Evaluation of mercury speciation by EPA (Draft) Method 29. Proceedings of the AWMA 88th Annual Meeting & Exhibition, San Antonio, Texas, Paper 95-MP7.03.

Morseli, L. , Zappoli, S. & Militerno, S. (1993) The presence and distribution of heavy metals in municipal solid waste incinerators. Toxicological and Environmental Chemistry, 37, pp. 139-145.

Pacyna, J.M. (1984) Estimation of the atmospheric emissions of the trace elements from anthropogenic sources in Europe. Atmospheric Environment, 18, pp. 41-50.

Steinsberger, S.C. , Deweek, W.G. & Ward, T.E. (1989) Measurement methodology for toxic metals from municipal waste combustors. Proceedings of International Conference on Municipal Waste Combustion, pp. 5c-1-5c-13.

Vogg, H. (1987) Behaviour of (heavy) metals in the incineration of municipal wastes. International Chem. Eng., 27, pp. 177-182.

10.

Ward, T.E. (1994) Multiple metals stack emission measurement methodology for stationary sources, current status. Fuel Processing Technology, 39, pp. 259-263.

11.

Walker, B.L. & Cooper, C.D. (1992) Air pollution emission factors for medical waste incinerators. J.A&WMA, 42, pp. 784-791.