Serial water balance method for predicting leachate generation in landfills

Abstract

This paper presents the "Serial Water Balance” method for predicting leachate generation in landfills. This procedure makes it possible to calculate the total leachate likely to be generated, by estimating an individual cell by cell water balance. This new development considers the interaction effects between cells, through the execution of simple field capacity tests on solid waste samples under different loading conditions. The procedure described in this paper simulates the effect induced by fluid percolating from a cell at an upper layer to cells in the immediately subjacent layer.

The method described here was applied to the landfill in Nuevo Laredo, Tamaulipas (Mexico), after first ascertaining information regarding: duration of construction time, exposure time, surface area, the quantity of waste, number of confining cells, and local weather conditions.

In a full-scale test case the suggested method has predicted 67% of the leachate produced in a period of 4 years. Further testing and more detailed analysis of the composition of the waste used in the calculations, may improve the accuracy in predicting leachate production.

Even though this SWB methodology was applied to a landfill subject to extreme climatological conditions (high daytime temperatures), it is possible to adapt the methodology to solid waste disposal sites in regions with more humid or moderate climates.

Keywords

Leachate confining cells serial water balance macro-cell wmr 407-1

Get full access to this article

View all access options for this article.

References

El-Fadel, M. , Findikakis, A.N. & Leckie, J.O. (1997) Modelling Leachate Generation and Transport in Solid Waste Landfill. Environmental Technology, Vol. 18, pp. 669-686.

EPA/530-SW-84-009 June (1984) The Hydrology Evaluation Leachate Performance (HELP) Model, Vol. II, Documentation for version I, Office of Solid Waste and Emergency Response, U.S. EPA.

Fenn, D.G. , Hanley, K.I. & Degeare, T.V. (1975) Use of the Water Balance Method for Predicting Leachate Generation from Solid Waste Disposal Sites. U.S. Environmental Protection Agency, EPA 530/SW-168, pp. 1-10.

IMTA (1997) Extractor Rápido de Información Climatológica. Instituto Mexicano de Tecnología del Agua, disco compacto.

Johnson, R.A. (1986) SOILINER Model - Documentation and User’s Guide, U.S. Environmental Protection Agency, Hazardous Waste Engineering Research Lab. EPA-530-SW-86-006A, April.

Khanbilvardi, R.M. , Shabbir, A. & Gleason, P.J. (1995) Flow Investigation for Landfill Leachate (FILL), Journal Environmental Engineering, Vol. 121, January, pp. 45-57.

Noble, J.J. & Arnold, A.E. (1991) Experimental and Mathematical Modelling of Moisture Transport in Landfill, Department of Chemical Engineering, Tufts University, Vol. 100, pp. 95-111.

Orta, L.T., Monje, R.I., Rojas, V.N., Sánchez, G.J., Kiss, G. & Cruz, R.R. (1999) Control Ambiental del Relleno Sanitario de Nuevo Laredo, Tamaulipas (in Spanish). Final Report prepared for ICA-SETASA by the II-UNAM. Appendices I and II.

Sánchez G.J., Ortega R.R., Semadeni M.I. & Cedillo V. (1996) Obtención de parámetros de Ajuste para el Cálculo del Balance de Agua en Sitios de Disposición Final de Residuos Sólidos Peligrosos. Memorias del XXV Congreso Interamericano de Ingeniería Sanitaria y Ambiental, Volumen III, Tratamiento y Disposición de Residuos Sólidos. Celanese Mexicana.

10.

Tchobanoglous G. , Theisen H & Vigil S.A. (1999) Integrated Solid Waste Management. McGraw Hill international Editions. Chapter 11.

11.

Uguccioni, M. & Zeiss, Ch. (1997) Improvement of Leachate Prediction through Municipal Solid Waste Layers. Journal of the American Water Resources Association, Vol. 33, No. 6, pp. 1265-1278.