Regional shipping strategy assessment based on installing a refuse-derived-fuel process in a municipal incinerator

Abstract

The rising prices of raw materials and the concerns of energy recovery have resulted in an increasing interest in processing the waste streams. In recent years, a number of credible surveys have shown that recycling and waste-to-energy processes appear to work well together. Compatibility exists for several reasons related to economic, environmental, political, and social aspects. However, the regional impacts of installing a centralised refused-derived fuel (RDF) process prior to waste-to-energy facilities remain unclear due to the inherent complexity of solid waste composition, generation rate, energy and material recovery goals, and the existing shipping patterns. This paper illustrates a thorough evaluation for a RDF pilot study from both quantitative and qualitative aspects. Such a process, consisting of the standard unit operations of shredding, magnetic separation, trommel screening, and air classification, might be useful for integrating the recycling and presorting efforts with a large-scale municipal incinerator in a region. A series of sampling and analyses of the waste streams were performed in Taipei County, Taiwan in order to characterise its potentials for recycling. Based on the proper estimation of solid waste generation, the goal programming modelling analysis not only focuses on an evaluation of how the waste inflows with different rates of generation, physical and chemical compositions, and heating values in the service areas can be processed by a centralised RDF facility to meet both the energy recovery and throughput requirements in different municipal incinerators but also indicates the optimal shipping pattern associated with several incinerators due to such an installation in a regional sense. A case study designed to explore the regional impacts on shipping patterns in the southwestern of Taipei County, Taiwan verifies the application potential of such a planning methodology.

Keywords

Waste-to-energy process recycling resource conservation systems analysis optimisation solid waste management

Get full access to this article

View all access options for this article.

References

Chang, N. B. & Wang, S. F. (1996a) Solid waste management system analysis by multi-objective mixed integer programming model. Journal of Environmental Management, 48, 17-43.

Chang. N. B. & Wang, S. F. (1996b) Managerial fuzzy optimal planning for solid waste management systems. Journal of Environmental Engineering, ASCE, 122(7), 649-658.

Chang N. B. , Chang, Y. H. , & Chen, W. C. (1997) Evaluation of heat values and its prediction for refuse-derived fuel. The Science of the Total Environment, 197, 139-148.

Chang N. B. , Y. H. Chang , & Chen, W. C. (1998a) Systematic evaluation and uncertainty analysis of refuse-derived fuel process in Taiwan. Journal of Air & Waste Management Association, 48, 174-185.

Chang N. B. , Chen, W. C & Chang, Y. H. (1998b) Comparative evaluation of RDF and MSW incineration process. Journal of Hazardous Materials, 58, 33-45.

Chang, Y. H. & Chang, N. B. (1998) Optimisation analysis for the development of short-term solid waste management strategies using pre-sorting process prior to incinerators. Resources Conservation & Recycling, 24, 7-32.

Chang, N. B. and Wei, Y. L. , (1999) Strategic planning of recycling drop-off stations by multi-objective programming. Environmental Management, 24(2), 247-264.

Chang, N. B. and Wei, Y. L. (2000) Comparative study between heuristic algorithm and optimisation technique for vehicle routing and scheduling in the solid waste management system. Civil Engineering and Environmental Systems, accepted, Oct.

Chang, N. B. and Chang, Y. H. (2001) Optimal shipping strategy of solid waste streams with respect to throughput and energy recovery goals of incineration facilities. Civil Engineering and Environmental Systems, 18, 193-214.