Red mud of aluminium production waste as basic component of new construction materials

Abstract

The work presented here shows the possibility of using the red mud waste from the Bayer process used for aluminium production as the main component of new construction materials. It describes some recent experiments lasting 180 days as well as some 1 year old samples. The best part of materials used are industrial wastes, but some of them contain small (no more the 2%) additions of CaO or Portland Cement (PC) to increase the strengthening rate of the samples. The high strength values of these materials allow their use as new materials for road and airfields bases, levee core, dumps, foundations, etc. They can also be used to make bricks, tiles, and similar items. In addition to the economic factors, these materials are very easy to use and no new residues are generated.

The results of the heavy metal leaching tests, not included in this paper, show very low levels of their leachability in acid solutions, far below the demands of the Spanish environmental standards. This can be explained by the strong chemical binding of heavy metals in practically insoluble chemical compositions.

Keywords

Red mud solid industrial wastes dump ferrous slag activator properties construction materials

Get full access to this article

View all access options for this article.

References

Fernández, C. Ayala, J. Blanco, F. Del Campo, J.J. , García P. (1996) Use of red mud in construction materials. Proc. of the “Light Metals” Conf., Annaheim, California, USA, 99-106.

Kanev, R. Chavdarova, D. , Silla, L. (1990) Sulfurisation sintering: one more promising possibility for red mud utilisation as mixed mineral coagulant.Proc. of 6th Yugoslav Int. Symp. On Aluminium Bauxites and Extractive Metallurgy, Titovo Uzice, 18-20.

Kirkpatrick, D.B. (1996) Red mud product development, Proc. “Light Metals’ Conf., Anaheim, California, USA, 75-80.

Mymrin V.A., Vázquez-Vaamonde, A.J. (1998) Obtención de materiales dotados de resistencia mecánica y baja lixiviabilidad obtenidos a partir de residuos mineros e industriales, Spanish Pat., nº 9802248.

Mymrin, V.A. , Pininsca, I. (1978) The hardening process of Dump Blast Furnace Slags and their Geotechnical Utilisation, Stratto da Geología Applicata e Idrogeología, Bari, Italy, v. XIII, 293-298.

Mymrin, V.A. (1981) Activation of the blast furnace dump slags by small addition of the lime or Portland cement, VII Kraiowa Konf. Mech. Gruntow y Fundamentowania, Warsaw, Poland, 498-503.

Mymrin, V.A. (1994) Solid and liquid industrial wastes as compounds of new construction materials. Proc. III Int. Congr. Opf Chemistry of Nat. Assoc. Of Spanish Chemists. Canary Islands, Spain, 108.

Mymrin, V.A. (1998) Empleo de residuos industriales siderúrgicos como materiales aglomerantes en construcción. Rev. Met., 34, Madrid, Spain, 441-445.

Sujana, M.G. , et al. (1996) Effect of calcination and physicochemical properties of red mud. Proc. Light Metlas Conf., Anaheim, California, USA, 93-98.