Constant thickness unidirectional specimens with plies cut across the complete width have been tested in four point bending. With the cut plies on both the tension and compression side, specimens failed by delamination initiating above and below the ends of the cut plies, and propagating along the interfaces between continuous and discontinuous plies. Finite element analysis has been carried out to determine the stress distributions and strain energy release rates, and an analytical expression for the strain energy release rate has also been derived. Predictions of the delamination stresses correlate well with measured values.
Get full access to this article
View all access options for this article.
References
1.
1. Wisnom, M. R. 1991. "Prediction of Delamination in Unidirectional Glass Fibre-Epoxy With Tapered Thickness,"Proc. AIAA Structures, Structural Dynamics and Materials Conference. Baltimore, U.S.A., pp. 1162-1172.
2.
2. Wisnom, M. R. 1992. "Prediction of Delamination of Unidirectional Glass Fibre-Epoxy with Dropped Plies,"AGARD Conference CP530, Debonding/Delamination in Composites. Patras, Greece.
3.
3. Wisnom, M. R., M. I. Jones and W. Cui.1994. "Failure of Tapered Composites Under Static and Fatigue Tension Loading"AIAA Journal, in press.
4.
4. Cui, W., M. R. Wisnom and M. I. Jones."A New Model to Predict the Static Strength of Tapered Lamintes.'Composites, in press.
5.
5. Wisnom, M. R.1992. "On the Increase in Fracture Energy With Thickness in Delamination of Unidirectional Glass Fibre-Epoxy With Cut Central Plies,"J. Reinforced Plastics and Composites, 11:897-909.
6.
6. Cui, W., M. R. Wisnom and M. Jones.1994. "An Experimental and Analytical Study of Delamination of Unidirectional Specimens With Cut Central Plies,"J. Reinforced Plastics and Composites, 13:722-739.
7.
7. Prinz, R. and Y. Li.1990. "Interlaminar Mode II Energy Release Rate for Delamination Growth of Graphite/Epoxy Composites," in Selected Paper in Scientific and Technical International Cooperation Program. China: Aviation Industry Press, pp. 83-116.
8.
8. Wisnom, M. R., M. I. Jones and W. Cui. 1993. "Delamination in Composites With Terminating Internal Plies Under Tension Fatigue Loading,"AS7M Fifth Symposium on Composite Materials: Fatigue and Fracture. Atlanta.
9.
9. ABAQUS, Hibbitt, Karlsson and Sorensen Inc., 1080 Main Street, Pawtucket, RI 02860, U.S.A.
10.
10. Cui, W., M. R. Wisnom and M. I. Jones.1994. "Effect of Through Thickness Tensile and Compressive Stresses on Delamination Propagation Fracture Energy,"Journal of Composites Technology and Research, in press.
