A simple equation which can describe the compressive behavior of uni directional composites has been derived. With this equation, the effects of resin stiffness, fiber anisotropy, fiber misalignment and waviness, fiber/matrix interface, and void content on composite compressive strength can be assessed quantitatively and qualitatively. Fur thermore, the equation can help determine the failure modes of composites under com pression.
Argon, A.S.1972. Treatise on Materials Science and Technology, New York: Academic Press, 1:79-114
21.
Hackett, R.M. , T.S. Tarpy, Jr and J.L. Wood1972Polymer Engineering and Science, 12:272-276.
22.
Kao, B.-C. and A. C Pipkin.1972. Acta Mechanica , 13387-401
23.
Lamr, Y. and Y.C. B Fung1972J. Composite Materials , 6:387-401.
24.
Greszczuk, L.B.1973Analysis of the Test Methods for High Modulus Fibers and Composites, ASTM STP 521, Philadelphia, PA. American Society for Testing and Materials, pp. 192-217.
25.
Greszczuk, L.B.1974. Composites Materials. Testing and Design (Third Conference), ASTM STP 546, Philadelphia, PAAmerican Society for Testing and Materials, pp. 5-29
26.
Greszczuk, L.B.1975. AIAA Journal , 13:1311-1318.
27.
Greszczuk, L.B.1982. Fracture of Composite Materials , G. C. Sih and V P. Tamus, eds., The Hague: Martinus Nijhoff Publishers, pp 231-244.
28.
Ewins, P.D. and A.C. Ham1973. Royal Aircraft Establishment Technical Report 73057 .
29.
Ewins, P.D. and A. C Ham1974. AIAA/ASME/SAE 15th Structures, Structural Dynamics and Materials Conference, AIAA Paper No. 74-353.
30.
Hanasaki, S. and Y. Hasegawa.1974. J. Composite Materials, 8:306-309.
31.
Davis, J.G.1975Composite Reliability, ASTM STP 580, Philadelphia, PAAmerican Society for Testing and Materials, pp. 364-377.
32.
Hancox, N.L.1975. J. Materials Science , 10:234-242
33.
Hawthorne, H.M. and E. Teghtsoonian1975J. Materials Science, 10:41-51
34.
Hayashi, I. and M. Fujikake197518th Japan Congress on Materials Research, pp. 141-147.
Chaplin, C.R.1977. J. Materials Science , 12347-352
37.
Ryder, J.T. and E.D. Black1977. Composites Materials. Testing and Design (Fourth Conference), ASTM STP 617, Philadelphia, PA: American Society for Testing and Materials, pp. 170-189.
Hofer, K.E. Jr. and P.N. Rao.1977. J. Testing and Evaluation, 5.278-283.
40.
Pattnaik, A., M.J. Koczak and H.C. Roger1979. New Developments and Applications in Composites, D. Kuhlmann-Wilsdorf and W C. Harrigan, Jr , eds., Warrendale, PA: The Metallurgical Society of AIME, pp 261-282.
41.
Chou, T.-W. and M.G. Bader.1979. New Developments and Applications in Composites, D. Kuhlmann-Wilsdorf and W. C. Harrigan, Jr , eds , Warrendale, PA: The Metallurgical Society of AIME , pp. 331-346.
42.
Chou, T.-W. and A. Kelly.1980. J. Materials Science, 15:327-331
43.
Chou, T.-W.1979. Modern Developments in Composite Materials and StructuresNew York, NY: The American Society of Mechanical Engineers, pp. 165-171
44.
Wang, A.S.D.1978. ASME Winter Annual Meeting, ASME Paper 78-WA/Aero-1
Adsit, N.R.1983. Compression Testing of Homogeneous Materials and Composites, ASTM STP 808, R. Chait and R Papirno, eds., Philadelphia, PA: American Society for Testing and Materials, pp. 175-186.
47.
Piggott, M.R. and B. Hams.1980. Advances in Composite Materials, Oxford: Pergamon Press, 1:305-312.
48.
Piggott, M.R. and B. Harris.1980J. Materials Science, 15:2523-2538
49.
Piggott, M.R. and P. Wilde.1980. J. Materials Science, 15:2811-2815.
50.
Piggott, M.R. and B. Harris.1981. J. Materials Science, 16.687-693
51.
Martinez, G.M. , M.R. Piggott, D M. R. Bainbridge and B. Harris1981. J. Materials Science, 16:2831-2836.
52.
Piggott, M.R.1981. J. Materials Science , 16:2837-2845.
53.
Mrse, A. and M.R. Piggott1990. 35th Int. SAMPE Symposium and Exhibition , 2236-2244.
54.
Clark, R.K. and W.B. Lisagor.1981. Test Methods and Design Allowables for Fibrous Composites, ASTM STP 734, C. C. Chamis, ed., Philadelphia, PA: American Society for Testing and Materials, pp. 34-53.
55.
Shuart, M.J.1981. Test Methods and Design Allowables for Fibrous Composites, ASTM STP 734, C. C. Chamis, ed., Philadelphia, PA: American Society for Testing and Materials, pp. 152-165
56.
Shuart, M.J.1985. NASA Technical Memorandum 87640.
Woolstencroft, D.H., A.R. Curtis and R.I. Haresceugh.1981. Composites, 12.275-280 59. Woolstencroft, D. H., R. I. Haresceugh and A. R. Curtis. 1982ICCM-IV, 439-446
59.
Wronski, A.S. and T.V. Parry.1982. J. Materials Science, 17:3656-3662.
60.
Smoot, M.A.1982. Center for Composite Materials Report CCM-82-16 , University of Delaware.
61.
Port, K.F.1982. Royal Aircraft Establishment Technical Report 82083 .
62.
Sinclair, J.H. and C.C. Chamis.1983. Compression Testing of Homogeneous Materials and Composites, ASTM STP 808, Philadelphia, PA: American Society for Testing and Materials, pp. 155-174.
63.
Reiss, R., T.-S. Yao and R.K. Clark.1983. Compression Testing of Homogeneous Materials and Composites, ASTM STP 808, Philadelphia, PA: American Society for Testing and Materials, pp. 200-220.
64.
Lamothe, R.M. and J. Nunes.1983. Compression Testing of Homogeneous Materials and Composites, ASTM STP 808, Philadelphia, PA: American Society for Testing and Materials, pp. 241-253.
65.
Budiansky, B.1983. Computers and Structures , 16:3-12.
66.
Rehfield, L.W. , E.A. Armanios and C. Qiao.1985. Recent Advances in Composites in the United States and Japan, ASTM STP 864Philadelphia, PA. American Society for Testing and Materials, pp. 236-252.
67.
Hahn, H.T.1985. Tough Composite Materials Recent Developments, Park Ridge, NJ. Noyes Publications, pp. 72-88.
68.
Hahn, H.T. and J.G. Williams.1986. Composite Materials. Testing and Design (Seventh Conference), ASTM STP 893, Philadelphia, PA: American Society for Testing and Materials, pp. 115-139.
69.
Hahn, H.T. and M.M. Sohi1986Composites Science and Technology, 27.25-41
70.
Sohi, M.M. and H.T. Hahn.1986. Composites '86: Recent Advances in Japan and the United States, K. Kawata, S. Umekawa, and A. Kobayashi, eds., Tokyo, Japan Japan Society for Composite Materials , pp 417-424.
71.
Hahn, H.T.1987. ICCM-VI, pp. 1269-1277
72.
Miyano, Y., M. Kanemitsu, T. Kumo and M. Miki.1984Mechanical Behavior of Materials-IV , J. Carlsson and N. G Ohlson, eds , Oxford, UK: Pergamon Press, pp. 473-479.
73.
Miyano, Y., M. Kanemitsu, T. Kunio and H.A. Kuhn.1986. J. Composite Materials , 20:520-538.
74.
Kumar, S., W.W. Adams and T.E. Helminiak.1988. J. Reinforced Plastics and Composites, 7:108-119.
75.
Lee, R.J.1987. Composites, 18 35-39
76.
Lee, R.J. and A.S. Trevett.1987ICCM-VI,1.278-1287.
77.
Kretsis, G.1987. Composites, 18:13-23.
78.
Barker, A.J. and V. Balasundaram1987. Composites, 18:217-226.
79.
Henrat, P.1987. 8th SAMPE European Chapter Int. Conference, pp. 389-399.
80.
Zelenski, E.S. , A.M. Kuperman, S.L. Bazhenov and Al. Al Berlin.1987. ICCM-VI, 1.288-1.298.
81.
Steif, P.S.1987. Int. J. Solids and Structures, 23:1235-1246.
82.
Steif, P.S.1988. J. Composite Materials , 22.818-828.
83.
Camponeschi, E.T., Jr.1987. David Taylor Research Center, Report DTRC-87/050
84.
Yurgartis, S.W.1987Ph.D. thesis, Rensselaer Polytechmc Institute
85.
Yurgartis, S.W. and S.S. Sternstem.1989. American Society for Composites Fourth Technical Conference, pp. 826-834.
86.
Waas, A.M.1988. Ph.D. thesis, California Institute of Technology
87.
Waas, A.M., C.D. Babcock, Jr. and W.G. Knauss.1988. Composite Material Technology 1989 , D. Hui and T. J. Kozik, eds., New York, NY: The American Society of Mechanical Engineers.
88.
Bogetti, T.A. , J.W. Gillespie, Jr. and R.B. Pipes.1988. Composites Science and Technology, 32:57-76.
89.
Yeh, J.R. and J.L. Teply.1988. J. Composite Materials, 22:245-257.
90.
DeTeresa, S.J. , R.S. Porter and R.J. Farris.1988. J. Materials Science, 23.1886-1894.
91.
Berg, J.S. and D.F. Adams.1988. Report UW-CMRG-R-88-186, University of Wyoming: Composite Materials Research Group
92.
Adams, D.F.1989. 34th Int. SAMPE Symposium and Exhibition, pp. 1422-1433.
93.
Berg, J.S. and D.F. Adams.1989J. Composites Technology and Research , 11:41-46.
94.
Adams, D.F. and E.M. Odom1991. J. Composites Technology and Research, 13:36-40
95.
Norita, T., A. Kitano and K. Noguchi.1988. 4th Japan-U.S. Conference on Composite Materials, pp. 548-557.
96.
Yao, L.N. and T.-W. Chou.1988. Composites Structures, 12:27-37.
97.
Lesser, D. and D. Leach.1989. 34th Int. SAMPE Symposium and Exhibition, pp. 1464-1473.
98.
Guild, F.J. , P.J. Davy and P.J. Hogg.1989. Composites Science and Technology, 36:7-26.
99.
Lavrov, A.V. and M.K. Smirnova.1989. Mekhanika Kompozitnykh Matenalov, 4:631-634.
100.
Majors, P.S. , S.S. Sternstein and M.S. Shephard.1989. 21st Int. SAMPE Technical Symposium , pp. 152-165
101.
Minahen, T.M. and W.G. Knauss.1989. J. Applied Mechanics , 56:983-985
