Sage Journals: Discover world-class research

Abstract

By using a double cantilever beam (DCB) specimen, the hygrothermal effect on Mode II (in-plane shear loading) interlaminar fracture toughness of a carbon/polyphenylene sulfide (PPS) unidirectional laminate was investigated. The critical strain energy release rates, G_nc , of the carbon/PPS laminate during crack propagation under Mode II loading for various temperature/relative humidity conditions were obtained both by linear beam theory and by the area method. It was found that the critical strain energy release rate of the carbon/PPS laminate increases with both moisture content and temperature. Fracture of the carbon/PPS laminate was characterized primarily by micro-cracking at low temperature/low moisture content and by matrix softening and fiber bridging at high temperature/high moisture content.

Get full access to this article

View all access options for this article.

References

1. O'Connor

J. E.

Lou

A. Y.

Beever

W. H.

. 1985. “Polyphenylene Sulfide—A Thermoplastic Polymer Matrix for High Performance Composites,” Proceedings of the 5th International Conference on Composite Materials, San Diego, California, pp. 963–970.

2. Ma

C. C. M.

O'Connor

J. E.

Lou

A. Y.

. 1984. “Polyphenylene Sulfide: Resin, Prepreg and High Performance Composites,” Proceedings of the 30th SPI Reinforced Plastics/Composites Conference, paper HE.

Brady

D. G.

1984. “Long Fiber Reinforced PPS—A New Dimension in Toughness,” SPE Antec Proceedings, 42:690.

Vanderkley

P. S.

1981. “Mode I-Mode II Delamination Fracture Toughness of a Unidirectional Graphite/Epoxy Composite,” a thesis of Master of Science at Texas A&M University.

5. Russell

A. J.

Street

K. N.

. 1987. “The Effect of Matrix Toughness on Delamination: Static and Fatigue Fracture under Mode II Shear Loading of Graphite Fiber Composite,” Toughened Composites, ASTM STP 937, Norman

J. J.

, ed., American Society for Testing and Materials, Philadelphia, pp. 275–294.

6. Johnson

W. S.

Mangalgiri

P. D.

. 1987. “Influence of the Resin on Interiaminar Mixed-Mode Fracture,” Toughened Composites, ASTM STP 937, Norman

J. J.

, ed., American Society for Testing and Materials, Philadelphia, pp. 295–315.

7. Mall

Law

G. E.

Katouzian

. 1987. “Loading Rate Effect on Interlaminar Fracture Toughness of a Thermoplastic Composite,” J. Composite Materials, 21:569–579.

8. Smiley

A. J.

Pipes

R. B.

. 1987. “Rate Effect on Mode I Interlaminar Fracture Toughness in Composite Materials,” J. Composite Materials, 21:670–687.

9. Russell

A. J.

Street

K. N.

. 1982. “Factors Affecting the Interiaminar Fracture Energy of Graphite/Epoxy Laminates,” Progress in Science and Engineering of Composites, Hayashi

Kawata

Umekawa

, eds., ICCM-IV, Tokyo, pp. 279–286.

10.

K. B.

1985. “Mechanisms of Interiaminar Fracture in a Thermoplastic Matrix Composite Laminate,” Proceedings of the Fifth International Conference on Composite Materials, San Diego, pp. 995–1006.

11.

11. Hibbs

M. E

Tse

M. K.

Bradley

W. L.

. 1987. “Interiaminar Fracture Toughness and Real-Time Fracture Measurement of Some Toughened Graphite/Epoxy Composites,” Toughened Composites, ASTM STP 937, Norman

J. J.

, ed., American Society for Testing and Materials, Philadelphia, pp. 115–130.

12.

12. Jordan

W. M.

Bradley

W. L.

. 1987. “Micromechanisms of Fracture in Toughened Graphite-Epoxy Laminates,” Toughened Composites, ASTM STP 937, Norman

J. J.

, ed., American Society for Testing and Materials, Philadelphia, pp. 95–114.

13.

13. Kays

A. O.

Hunter

J. D.

. 1983. “Characterization of Some Solvent-Resistant Thermoplastic Matrix Composites,” Composite Materials: Quality Assurance and Processing, ASTM STP 797, Browning

C. E.

, ed., American Society of Testing and Materials, Philadelphia, pp. 119–132.

14.

Mascia

1982. Thermoplastics: Materials Engineering, New York: Applied Science Publishers Ltd.

15.

15. Beever

W. H.

Ryan

C. L.

O'Connor

J. E.

Lou

A. Y.

. “Ryton®-PPS Carbon Fiber Reinforced Composites: The How, When, and Why of Molding,” Toughened Composites, ASTM STP 937, Norman

J. J.

, ed., American Society for Testing and Materials, Philadelphia, pp. 319–327.

16.

16. Carlsson

L. A.

Gillespie

J. W.

Jr. Pipes

R. B.

. 1986. “On the Design and Analysis of the End Notched Flexure (ENF) Specimen for Mode II Testing,” J. Composite Materials, 20:594–604.

Hygrothermal Effect on Mode II Interlaminar Fracture Toughness of a Carbon/Polyphenylene Sulfide Laminate

Abstract

Get full access to this article

References