The main objective of this study was to investigate the influence of laminate thickness on the three-dimensional elastic properties of a unidirectional graphite/epoxy composite cured in an autoclave. The in-plane mechanical properties were studied by means of tensile specimens while the out-of-plane properties were evaluated by a specially developed z-direction tensile test specimen. In order to determine the elastic modulus E33, finite element stress analyses of the z-direction specimens were per formed. To characterize the degree of cure and the glass transition temperature of the resin in the laminates, Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA) were used.
Get full access to this article
View all access options for this article.
References
1.
Springer, G.S. , "Resin Flow During the Cure of Fiber Reinforced Composites," J. Comp. Mat., Vol. 16, p. 400 (1982 ).
2.
Loos, A.C. and Springer, G.S., "Curing of Epoxy Matrix Composites," J. Comp. Mat. , Vol. 17, p. 135 (1983).
3.
Kardos, J.L., Dudukovic, M.P., McKague, E.L. and Lehman, M.W., "Void Formation and Transport During Composite Laminate Processing: An Initial Model Framework," Composite Materials: Quality Assurance and Processing, ASTM STP 797 ( C. E. Browning ed.), p. 96 (1983).
4.
Jones, R.M., Mechanics of Composite Materials, Scripta Book Co., Washington, D.C. (1975).
5.
BASIS-Finite Element Structural Analysis-Users Manual, by S. Kjellberg et. al., Stockholm (1983).
6.
Bogy, D.B., "The Plane Solution for Joined Dissimilar Elastic Semi Strips Under Tension," J. Appl. Mech., Vol. 42, p. 93 (1975 ).
7.
Wang, S.S. and Choi, I., "Boundary Layer Effects in Composite Laminates: Part I—Free— edge Stress Singularities," J. Appl. Mech., Vol. 49, p. 541 (1982).
8.
Zwiers, R.I. , Ting, T.C.T. and Spilker , R.L., "On the Logarithmic Singularity of Free-edge Stress in Laminated Composites Under Uniform Extension ," J. Appl. Mech., Vol. 49, p. 561 (1982).
9.
Sindelar, P., "Fatigue Resistant Design Based on Fracture Mechanics," FFA HU-2013, Stockholm, in Swedish (1978).
10.
Wilkins, D.J. , Eisenmann, R.R., Camin , R.A., Margolis, W.S. and Benson, R.A., "Characterization Delamination Growth in Graphite-Epoxy," Damage in Composite Materials: Basic Mechanisms, Accumulation, Tolerance and Characterization , American Society for Testing and Materials (1981).
