Sage Journals: Discover world-class research

Abstract

The strength and variability of carbon and glass fibers have been estimated in several ways from tests on single fibers and loose bundles of fibers. These tests involved analyzing the variation of strength with the length of the fibers, the distribution of strengths, multiple fractures of a single fiber, and the shape of the stress/strain curve for a loose bundle. The procedures based on loose bundle tests are considerably easier to perform and provide very similar results. Tows of the same batches of fibers were impregnated with epoxy resin and the tensile strengths of the resulting composites were found to be approximately 2.5 times higher than those of the equivalent loose bundles. A rule-of-mixtures approach is unable to account for this ratio, but two- and three- dimensional probabilistic models provide good predictions of the relative strengths.

Get full access to this article

View all access options for this article.

References

Zweben, C. and Rosen, B.W. , "A Statistical Theory of Material Strength with Application to Composite Materials," J. Mech. Phys. Solids, Vol. 18, 1970, pp. 189-206.

Weibull, W. "A Statistical Theory of the Strength of Materials," Ingeniörsvetenskapsakademiens, Handlingar Nr. 151, 1939.

Weibull, W. , "The Phenomenon of Rupture in Solids," Ingeniörsvetenskapsakademiens , Handlingar NR. 153, 1939, pp. 1-45.

Manders, P.W. and Bader, M.G. , "The Strength of Hybrid Glass/Carbon Fibre Composites, Part 2, A Statistical Model," J. Mat. Sci., 16, 1981, pp. 2246-2256.

Jones, J.B. , Barr, J.B. and Smith, R.E. , "Analysis of Flaws in High-Strength Carbon Fibres from Mesophase Pitch ," J. Mat. Sci., 15, 1980, pp. 2455-2465.

Barry, P.W. , "Experimental Data for the Longitudinal Tensile Strength of Unidirectional Fibrous Composites—Part I: Fibre and Matrix," Fiber Science and Technology, 11, 1978 , pp. 245-255.

Metcalfe, A.G. and Schmitz, G.K. , "Effect of Length on the Strength of Glass Fibers," Proc. ASTM, 64, 1964, p. 1075.

Coleman, B.D. , "On the Strength of Classical Fibres and Fibre Bundles," J. Mech. Phys. Solids, Vol. 7, 1958, pp. 60-70.

Manders, P.W. , Chou, T-W. Jones, F.R. , Rock, J.W. , "Statistical Analysis of Multiple Fracture in 0°/90°/0° Glass-Fiber/Epoxy-Resin Laminates" Accepted for publication in J. Mat. Sci.

10.

Harlow, D.G. and Phoenix, S.L. , "Probability Distributions for the Strength of Composite Materials I : Two Level Bounds." International Journal of Fracture, 17, 1981, pp. 347-372.

11.

Harlow, D.G. and Phoenix, S.L. , "The Chain-of-Bundles Probability Model for the Strength of Fibrous Materials I: Analysis and Conjectures," J. Comp. Mat., 12, 1978, pp. 195-214.

12.

Harlow, D.G. and Phoenix, S.L. , "The Chain-of-Bundles Probability Model for the Strength of Fibrous Materials II: A Numerical Study of Convergence ," J. Comp. Mat., 12, 1978, pp. 314-334.

13.

Manders, P.W. , Bader, M.G. and Chou, T. -W., "Monte Carlo Simulation of the Strength of Composite Fiber Bundles." Fibre Science and Technology. 17, 1982, pp. 183-204.

14.

Pitt, R.E. and Phoenix, S.L. , "Probability Distributions for the Strength of Composite Materials IV: Localised Load-Sharing with Tapering." To appear in International Journal of Fracture.

15.

Manders, P.W. and Chou, T-W. , "Enhancement of Strength in Composites Reinforced with Previously-Stressed Fibers." Accepted for publication in J. Comp. Mat.

16.

Lipson, S.G. and Lipson, H. , "Optical Physics," 2nd edition, Cambridge University Press, Cambridge, 1981.

17.

Batdorf, S.B. , "Tensile Strength of Unidirectionally Reinforced Composites—I," Journal of Reinforced Plastics and Composites , Vol. 1, 1982, pp. 153-164.

18.

Batdorf, S.B. and Ghaffarian, R. , "Tensile Strength of Unidirectionally Reinforced Composites—II," Journal of Reinforced Plastics and Composites , Vol. 1, 1982, pp. 165-176.

Variability of Carbon and Glass Fibers,and the Strength of Aligned Composites

Abstract

Get full access to this article

References