In this paper, the flexural and axial compressive behavior of the prefabricated architectural sandwich panels are studied. The sandwich panel is approximated by the finite-prism-strip model. Such method is simple to program and save considerable computing effort than the finite element method. The results are compared with the available analytical solution.
Get full access to this article
View all access options for this article.
References
1.
C.S. Gough, C.F. Elam, and N.A. de Bruyne, "The Stabilization of a Thin Sheet by a Continuous Supporting Medium ", Journal of the Royal Aeronautical Society, Vol. 44, No. 349 (Jan. 1940 ), pp. 12-43.
2.
N.J. Hoff and S.E. Mautner, "The Buckling of Sandwich-Type Panels", Journal of the Aeronautical Sciences, Vol. 12, No. 3 (July 1945), pp. 285-297.
3.
H.G. Allen, Analysis and Design of Structural Sandwich Panels, Pergamon Press (1969).
4.
K.P. Chong and J.A. Hartsock, "Flexural Wrinkling Mode of Elastic Buckling in Sandwich Panels", Proc. ASCE Specialty Conf. on Composite Materials, Pittsburgh (1972).
5.
K.P. Chong and J.A. Hartsock, "Flexural Wrinkling of Foam-Filled Sandwich Panels", J. Eng. Mech. Div., Proc. ASCE (1974 ).
6.
J.A. Hartsock and K.P. Chong, "Analysis of Sandwich Panels with Formed Faces", Proc. 14th Midwestern Mech. Conf, Norman, Oklahoma (1975).
7.
J.A. Hartsock and K.P. Chong, "Analysis of Sandwich Panels with Formed Faces", J. Struct. Div. Proc., ASCE (1976).
8.
K.P. Chong, K.A. Wang and G.R. Griffith, "Analysis of Continuous Sandwich Panels in Building Systems", Building and Environment, Vol. 14 ( 1979), pp. 125-130.
9.
K.P. Chong, K.O. Engen, and J.A. Hartsock, "Thermal Stress in Determinate and Indeterminate Sandwich Panels with Formed Facings", presented at ASCE First Eng. Mech. Div. Specialty Conference, Waterloo, Canada (1976).
10.
K.P. Chong , K.O. Engen, and J.A. Hartsock, "Thermal Stresses and Deflection of Sandwich Panels", J. Struct. Div., Proc. ASCE (1977).
11.
O.C. Zienkiewicz and Y.K. Cheung, The Finite Element Method in Structural and Continuum Mechanics, McGraw-Hill ( 1967).
12.
Y.K. Cheung , "Finite Strip Method in the Analysis of Elastic Plates with Two Opposite Simply Supported Ends", Proc. Institution Civil Engineers, Vol. 40 (May 1968 ), pp. 1-7.
13.
Y.K. Cheung , "Finite Strip Method Analysis of Elastic Slabs ", Journal of Engineering Mechanics, ASCE, Vol. 94, EM6 (Dec. 1968 ), pp. 1365-1378.
J.J.M. Too, "Two Dimensional Plate, Shell and Finite Prism Isoparametric Elements and Their Applications", Ph.D. Thesis, Department of Civil Engineering, University of Wales, Swansea (1971).
16.
Y.K. Cheung , M.F. Yeo, and D.A. Cumming, "Three-Dimensional Analysis of Flexible Pavements with Special Reference to Edge Loads", Proc. 1st Conf. of the Road Engineering Assoc. of Asia and Australia, Bangkok ( 1976).
17.
Y.K. Cheung , "Finite Strip Method in Structural and Continuum Mechanics", Int'l Journal of Structures, Vol. 1, No. 1 (Jan. 1981), pp. 19-37.
