The surge in polyimide (PI) film production has resulted in a significant accumulation of waste films. Thus, exploring rational recycling and reuse strategies for PI waste films is of great significance. In this work, PI waste film was ground into powder via liquid nitrogen pulverization, with a broad particle size distribution (DV10 = 5.692 μm, DV50 = 77.146 μm, DV90 = 376.913 μm) as characterized by a laser particle sizer. Different contents of PI powder (0 phr, 2.5 phr, 5 phr, and 7.5 phr) were blended with natural rubber (NR), followed by hot-press vulcanization to prepare NR/PI composites. The friction and wear properties of the composites were evaluated under room temperature, dry sliding conditions with a 5 N load. Experimental results demonstrated that PI powder derived from waste films not only enhanced the hardness but also reduced the friction coefficient of NR/PI composites. At 7.5 phr, the hardness increased by 5%, and the friction coefficient decreased by 13.83% with enhanced stability. Notably, at 2.5 phr PI content, the composite exhibited optimal PI-NR interfacial bonding, thermal stability, and wear performance: wear mass decreased by 30% and wear volume by 58.3% compared to neat NR.
RenSYuanSHuangM, et al.Cost-effective strategy for high-temperature energy storage performance of polyimide nanocomposite films. J Energy Storage2024; 95: 112524. https://doi.org/10.1016/j.est.2024.112524
2.
AchleitnerBHuberTLariseggerS, et al.Monitoring the imidization reaction of polyimide thin films using an in-situ LIBS approach. Polym Test2024; 141: 108647. https://doi.org/10.1016/j.polymertesting.2024.108647
3.
YuenyongsuwanJOhJHKwonYK. Porous polyimide composite films containing mesoporous hollow silica nanospheres with ultralow dielectric constant and dissipation loss. Polymer2024; 313: 127694. https://doi.org/10.1016/j.polymer.2024.127694
JiXXiangYGuoJ, et al.Polyacrylonitrile In-Situ reinforced polyimide superhydrophobic porous fibers: a miraculous thermal insulation and flame-retardant material. Chem Eng J2024; 493: 152641. https://doi.org/10.1016/j.cej.2024.152641
6.
LiXZhouSJiZ, et al.Fabrication of conductive polyimide/metal composite fibers for high temperature EMI shielding. Appl Surf Sci2025; 680: 161293. https://doi.org/10.1016/j.apsusc.2024.161293
7.
ZhangPHuangCLiuH, et al.Enhancement of thermo-oxidative stability of polyimide composites by functionalized polyimide film surface modification. Compos Commun2024; 52: 102118. https://doi.org/10.1016/j.coco.2024.102118
8.
LiHLiJChuW, et al.Ultrahigh absorption dominant EMI shielding polyimide composites with enhanced piezoelectric property. Compos Sci Technol2024; 257: 110820. https://doi.org/10.1016/j.compscitech.2024.110820
HoM-JChenK-YYanM, et al.Effect of three distinctive crosslinking agents on the dielectric properties of as-prepared polyimide aerogels prepared from super-critical fluid technique. Microporous Mesoporous Mater2025; 383: 113406. https://doi.org/10.1016/j.micromeso.2024.113406
11.
GuiYFeiZZhaoS, et al.3D printed high–strength polyimide aerogel metamaterials for sound absorption and thermal insulation. Constr Build Mater2024; 454: 139145. https://doi.org/10.1016/j.conbuildmat.2024.139145
12.
ZhengWXieHLiJ, et al.Design of polyimide/carbon nanotube@Ag@polyimide/graphene composite aerogel for infrared stealth and electromagnetic interference protection. Compos Appl Sci Manuf2024; 186: 108371. https://doi.org/10.1016/j.compositesa.2024.108371
13.
ZhaoWCaoXLiRKY, et al.Engineering designed functional covalent organic frameworks via pore surface modifications for effectively reducing the dielectric constant of polyimide-based electronic packaging materials. Polymer2024; 313: 127751. https://doi.org/10.1016/j.polymer.2024.127751
14.
DongXWanBFengY, et al.Ultra-low-permittivity, high hydrophobic, and excellent thermally stable fluoroelastomer/polyimide composite films employing dielectric reduction. Eur Polym J2022; 181: 111667. https://doi.org/10.1016/j.eurpolymj.2022.111667
15.
BaiHHuYZhaoY, et al.Mechanically strong, transparent polyimide composite thin films with a low dielectric constant. Compos Commun2024; 52: 102129. https://doi.org/10.1016/j.coco.2024.102129
16.
LiQGuoYOuyangC, et al.Porous highly fluorinated polyimide/polydopamine nanocomposite films with simultaneously enhanced toughness, UV-shielding and photostability for aerospace applications. Polym Test2023; 118: 107899. https://doi.org/10.1016/j.polymertesting.2022.107899
17.
ZhangSWuJLiangW, et al.Flexible and multifunctional polyimide-based composite films by self-reducing reaction for electromagnetic interference shielding in extreme environments. Carbon2023; 212: 118103. https://doi.org/10.1016/j.carbon.2023.118103
18.
ZhengWXieHLiJ, et al.Depositing gradient thickness silver film on CNF/rGO/polyimide surface to form a sandwich structure for efficient electromagnetic interference shielding. Surf Interfaces2024; 47: 104159. https://doi.org/10.1016/j.surfin.2024.104159
19.
KimYNLeeJKimY-O, et al.Colorless polyimides with excellent optical transparency and self-healing properties based on multi-exchange dynamic network. Appl Mater Today2021; 25: 101226. https://doi.org/10.1016/j.apmt.2021.101226
20.
ZhangXLiPZengJ, et al.Dynamic covalent bond enabled strong Bio-based polyimide materials with thermally-driven adaptivity, healability and recycling. Chem Eng J2023; 465: 143017. https://doi.org/10.1016/j.cej.2023.143017
21.
HuangHPengLFangW, et al.A polyimide-pyrolyzed carbon waste approach for the scalable and controlled electrochemical preparation of size-tunable graphene. Nanoscale2020; 12: 11971–11978. https://doi.org/10.1039/D0NR00725K
OlifirovLKaloshkinSErginK, et al.Solid-state recycling of polyimide film waste. J Appl Polym Sci2013; 127: 2960–2968. https://doi.org/10.1002/app.37964
24.
LiuYWangHLiC, et al.Hierarchical flaky porous carbon derived from waste polyimide film for high‐performance aqueous supercapacitor electrodes. Intl J of Energy Research2022; 46: 370–382. https://doi.org/10.1002/er.7106
25.
DingMDengZHuangZ, et al.Recovery of polyimide waste film by mechanical method to improve the heat fade resistance of BPR matrix friction composites. Wear2022; 502–503: 204398. https://doi.org/10.1016/j.wear.2022.204398
26.
CuiXXuGGaoZ, et al.Hierarchically porous and nitrogen-rich carbon materials derived from polyimide waste for high-performance supercapacitor applications. Energy Fuels2023; 37: 4038–4047. https://doi.org/10.1021/acs.energyfuels.2c03896
27.
Electric heating behavior of reduced oxide Graphene/Carbon Nanotube/Natural rubber composites with macro-porous structure and segregated filler network, (nd). https://www.mdpi.com/2073-4360/12/10/2411 (accessed November 27, 2024).
28.
GuerraNBSant’Ana PegorinGBorattoMH, et al.Biomedical applications of natural rubber latex from the rubber tree Hevea brasiliensis. Mater Sci Eng C2021; 126: 112126. https://doi.org/10.1016/j.msec.2021.112126
29.
Physico-mechanical properties and automotive fuel resistance of EPDM/ENR blends containing hybrid fillers. J Polym Res, (nd). https://doi.org/10.1007/s10965-016-1123-1 (accessed November 27, 2024).
30.
QuevedoBVKomatsuDde Lourdes RezendeM, et al.Synthesis of epoxidized natural rubber grafted with hyaluronic acid for the development of biomaterials. Int J Biol Macromol2023; 244: 125359. https://doi.org/10.1016/j.ijbiomac.2023.125359
31.
ChenDWuJWangY, et al.High-speed tribology behaviors of aircraft tire tread rubber in contact with pavement. Wear2021; 486-487: 204071. https://doi.org/10.1016/j.wear.2021.204071
ChenXKongYWangM, et al.Wear and aging behavior of vulcanized natural rubber nanocomposites under high-speed and high-load sliding wear conditions, Wear2022; 498–499: 204341. https://doi.org/10.1016/j.wear.2022.204341
34.
Kyei-ManuWATunnicliffeLBHerdCR, et al.Effect of carbon Black properties on cut and chip wear of natural rubber. Wear2024; 564-565: 205673. https://doi.org/10.1016/j.wear.2024.205673
