Plastic waste valorization is a critical aspect of waste management. In this study, recycled polyethylene (rPE) was prepared by suspending microparticles of low-density polyethylene (LDPE) waste in LDPE pyrolysis oil. The rPE was then blended with waste polystyrene pyrolysis oil (PPO) to form a drying plastic-based composite resin (rPEPPO). As the rPE content increased, rPEPPO exhibited significant decrease in drying time (90–50 min) and elongation-at-break (800–5%). Its physicochemical properties also varied, including viscosity (2.75–3.98 P), density (0.73–0.8 g/cm3), melting point (119–157°C), and moisture uptake (0–0.036%). FTIR, XRD, SEM, AFM, and TGA analyses of the rPEPPO blended in a 1:1 ratio revealed distinct structural features and interactions, suggesting copolymerization and/or cross-linking that enhance curing, drying, and structural reinforcement. Incorporating rPEPPO as a binder-extender component in water-based paint formulations delivered promising performance, indicating the potential of the composite resin for use in domestic and industrial coatings. This approach supports circular economy goals by introducing a novel technique for transforming plastic waste into functional materials.
de Sousa CunhaRMumbachGDMachadoRAF, et al.A comprehensive investigation of waste expanded polystyrene recycling by dissolution technique combined with nanoprecipitation. Environ Nanotechnol Monit Manag2021; 16: 100470.
4.
ShenMHuTHuangW, et al.Can incineration completely eliminate plastic wastes? An investigation of microplastics and heavy metals in the bottom ash and fly ash from an incineration plant. Sci Total Environ2021; 779: 146528.
5.
HamadKKaseemMDeriF. Recycling of waste from polymer materials: an overview of the recent works. Polym Degrad Stabil2013; 98(12): 2801–2812.
6.
SableSIkarMDudheinamdarP. Exploring the complexities and challenges of plastic recycling: a comprehensive research review. In: Sumesh, M., R. S. Tavares, J.M., Vettivel, S.C., Oliveira, M.O. (eds) 2nd International Conference on Smart Sustainable Materials and Technologies (ICSSMT 2023). ICSSMT 2023. Advances in Science, Technology & Innovation.Cham: Springer, 2024, pp. 189–202.
7.
MatuszewskaAOwczukMBiernatK. Current trends in waste plastics’ liquefaction into fuel fraction: a review. Energies2022; 15(8): 2719.
8.
Gil-JassoNDSegura-GonzálezMASoriano-GilesG, et al.Dissolution and recovery of waste expanded polystyrene using alternative essential oils. Fuel2019; 239: 611–616.
9.
OsemeahonSABarminasJTJangAL. Development of waste polystyrene as a binder for emulsion paint formulation I: effect of polystyrene concentration. Int J Eng Sci2013; 2(8): 30–35.
10.
UttaravalliANDindaSGidlaBR, et al.Studies on development of adhesive material from post-consumer (waste) expanded polystyrene: a two-edged sword approach. Process Saf Environ Prot2021; 145: 312–320.
11.
ApriantiNRahmawatiRErmadaFJ, et al.Catalytic pyrolysis of different plastics using low-cost catalysts: wax characteristics and oil stability. Energy, Ecology and Environment2024: 1–15.
12.
ZhaoYLuZGedelaR, et al.Performance and geocell-soil interaction of sand subgrade reinforced with high-density polyethylene, polyester, and polymer-blend geocells: 3D numerical studies. Comput Geotech2025; 178: 106949.
13.
SharmaRKMandalSNazariMA, et al. Advanced pyrolysis reactors for energy efficient production of biochar. In: Singh S.V., Mandal S., Meena R.S., Chaturvedi S., Govindaraju K. (Eds.) Biochar production for green economy. USA: Academic Press, 2024, pp. 27–41.
14.
MaafaIM. Pyrolysis of polystyrene waste: a review. Polymers2021; 13(2): 225.
15.
LuoHTyrrellHBaiJ, et al.Fundamental, technical and environmental overviews of plastic chemical recycling. Green Chem2024; 26(23): 11444–11467.
16.
Baena-GonzálezJSantamaria-EchartAAguirreJL, et al.Chemical recycling of plastic waste: bitumen, solvents, and polystyrene from pyrolysis oil. Waste Manag2020; 118: 139–149.
17.
MaSMZouCBakshiBR, et al.Molecular dynamics simulation of zeolite-assisted pyrolysis of polystyrene: material selection and mechanistic insights. Ind Eng Chem Res2024; 63: 21907–21917.
18.
MiandadRNizamiASRehanM, et al.Influence of temperature and reaction time on the conversion of polystyrene waste to pyrolysis liquid oil. Waste Manag2016; 58: 250–259.
19.
ShahJJanMRMaboodF, et al.Catalytic pyrolysis of LDPE leads to valuable resource recovery and reduction of waste problems. Energy Convers Manag2010; 51(12): 2791–2801.
20.
HariadiDSalehSMAnwar YaminR, et al.Utilization of LDPE plastic waste on the quality of pyrolysis oil as an asphalt solvent alternative. Therm Sci Eng Prog2021; 23: 100872.
21.
AkinterinwaABensonAAtikuJU, et al.Development, physicochemical characteristics and applications of paint/coatings: a treatise on the basic science and technology. OmniScience A Multi-disciplinary J2021; 11(3): 10–21.
22.
DieboldMBackerSDNiedenzuPM, et al. Color pigments. Pigments, extenders, and particles in surface coatings and plastics. Cham: Springer, 2022, pp. 263–318. https://doi.org/10.1007/978-3-030-99083-1_8
23.
OsemeahonSAAkinterinwaAFasinaE, et al.Reduction of polystyrene/polyurethane plastic wastes from the environment into binders for water-resistant emulsion paints. Heliyon2024; 10(6): e27868.
24.
ASTM International. ASTM D792-20: standard test methods for density and specific gravity (relative density) of plastics by displacement. ASTM International, 2020.
25.
ASTM International. ASTM D4287-00(2019): standard test method for high-shear viscosity using a cone/plate viscometer. ASTM International, 2019.
26.
ASTM International. ASTM D638-22: standard test method for tensile properties of plastics. ASTM International, 2022.
27.
ASTM International. ASTM D1640/D1640M-14(2022): standard test methods for drying, curing, or film formation of organic coatings at room temperature. ASTM International, 2022.
28.
AkinterinwaAOsemeahonSANkafamiyaII, et al.Formulation of emulsion paint from a copolymer composite of dimethylol urea/polystyrene. Chem Mater Res2015; 7(7): 20–26.
29.
VenderboschRHHeeresHJ. Pyrolysis oil stabilisation by catalytic hydrotreatment. Biofuel’s Engineering Process Technology2011: 385–410.
30.
NisarJAliGShahA, et al.Fuel production from waste polystyrene via pyrolysis: kinetics and products distribution. Waste Manag2019; 88: 236–247.
31.
FanX. Mechanics of moisture for polymers: fundamental concepts and model study. Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems EuroSimE. USA: Institute of Electrical and Electronics Engineers (IEEE) Conference Proceedings: EuroSimE, 2008, pp. 1–14.
32.
HassanpourBKarbhariVM. Characteristics and models of moisture uptake in fiber-reinforced composites: a topical review. Polymers2024; 16(16): 2265.
33.
BalaniKVermaVAgarwalA, et al.Physical, thermal, and mechanical properties of polymers. Biosurfaces: A Materials Science and Engineering Perspective2015; 329.
34.
BragaRRBallesterRYFerracaneJL. Factors involved in the development of polymerization shrinkage stress in resin-composites: a systematic review. Dent Mater2005; 21(10): 962–970.
35.
ZhangNXieC. Polymerization shrinkage, shrinkage stress, and mechanical evaluation of novel prototype dental composite resin. Dent Mater J2020; 39(6): 1064–1071.
36.
RostiMEBrandtL. Increase of turbulent drag by polymers in particle suspensions. Phys Rev Fluids2020; 5(4): 041301.
37.
AkinterinwaAOgwucheSOsemeahonSA, et al.Development of a novel and benign emulsion paint binder from epoxidized soybean oil and dimethylol urea blend. Ruhuna J Sci2019; 10(1): 51.
38.
NovakMOrmsbyB. Poly (vinyl acetate) paints: a literature review of material properties, ageing characteristics, and conservation challenges. Polymers2023; 15(22): 4348.
39.
ParkK-BKimJ-S. Pyrolysis products from various types of plastics using TG-FTIR at different reaction temperatures. J Anal Appl Pyrolysis2023; 171: 105983.
40.
PandaAKSinghRK. Experimental optimization of process for the thermo-catalytic degradation of waste polypropylene to liquid fuel. Advances in Energy Engineering (AEE)2013; 1(3): 74–84.
41.
MulchandaniNKatiyarV. Polymers from carbon dioxide—a route towards a sustainable future. In: Katiyar, V., Kumar, A., Mulchandani, N. (eds) Advances in Sustainable Polymers. Materials Horizons: From Nature to Nanomaterials.Singapore: Springer, 2020, pp. 35–49.
42.
QinYWangX. Conversion of CO2 into Polymers.In: Meyers, R. (eds) Encyclopedia of Sustainability Science and Technology. Springer, New York. 2018; 1–25.
43.
ShivasharanaCTKestiSS. Physical and chemical characterization of low density polyethylene and high density polyethylene. J Adv Sci Res2019; 10(03): 30–34.
44.
EsmaeiliAPourbabaeeAAAlikhaniHA, et al.Biodegradation of low-density polyethylene (LDPE) by mixed culture of Lysinibacillus xylanilyticus and Aspergillus Niger in soil. PLoS One2013; 8(9): e71720.
45.
BasakNBasakNMeenaSS. Biodegradation of low-density polythene (LDPE) by a novel strain of Pseudomonas aeruginosa WD4 isolated from plastic dumpsite. Biodegradation2024; 35(5): 641–655.
46.
AhmedAAAhmedDSEl-HitiGA, et al.SEM morphological analysis of irradiated polystyrene film doped by a Schiff base containing a 1, 2, 4-triazole ring system, Appl Petrochem Res2019; 9: 169–177.
47.
ChaudharyAKVijayakumarRP. Studies on biological degradation of polystyrene by pure fungal cultures. Environ Dev Sustain2020; 22(5): 4495–4508.
48.
Gutierrez-VelasquezEIMonteiroSNColoradoHA. Characterization of expanded polystyrene waste as binder and coating material. Case Stud Constr Mater2022; 16: e00804.
49.
NIS 269. Nigerian industrial standard: specifications for emulsion paints for decorative purposes. Standard Organization of Nigeria (SON), 2008. https://library.son.gov.ng/?t=buy-nis-opac
50.
IbrahimBHelwaniZWiranataA, et al.Properties of emulsion paints with binders based on natural latex grafting styrene and methyl methacrylate. Appl Sci2022; 12(24): 12802.
