This study improves weak interlaminar properties of carbon fiber-reinforced PMMA (CF/PMMA) laminates by incorporating calcium sulfate whisker (CSW)/PMMA interleaf films. Compared to direct whisker sprinkling, the film method enables uniform CSW dispersion and stabilization in the matrix. ILSS and IFSS tests revealed that 6 wt% CSW content optimized performance: ILSS reached 51.8 MPa (46.9% increase vs 35.3 MPa control) and IFSS achieved 40.2 MPa (83.1% increase vs 21.9 MPa control). Excessive CSW (>6 wt%) caused agglomeration, reducing ILSS and IFSS—particularly IFSS due to interfacial defects. Microscopic analysis demonstrated that CSW enhances interlaminar strength through crack deflection, pinning, matrix pull-out, and fracture mechanisms, while improving interfacial adhesion via mechanical anchoring with carbon fibers. The film-introduction strategy effectively enhances the interlaminar shear strength and overall quality stability of CFRP laminates, while establishing a research foundation for interfacial optimization in CSW-reinforced composites.
MaoZJiangTZhangX, et al.Co-continuous phase structure formed in melt processing inducing shear bands to prevent crack propagation: significant improvement in impact toughness of PMMA. Polym Test2020; 85: 106425.
4.
TangZFujimotoKOkazakiS. A comparison of the brittle PMMA with the ductile PC on the elasticity and yielding from a molecular dynamics perspective. Polymer2021; 226: 123809.
5.
HedrickJYilgorIJurekM, et al.Chemical modification of matrix resin networks with engineering thermoplastics: 1. Synthesis, morphology, physical behaviour and toughening mechanisms of poly (arylene ether sulphone) modified epoxy networks. Polymer1991; 32(11): 2020–2032.
6.
TangYYeLZhangZ, et al.Interlaminar fracture toughness and CAI strength of fibre-reinforced composites with nanoparticles–A review. Compos Sci Technol2013; 86: 26–37.
7.
MouritzA. Review of z-pinned laminates and sandwich composites. Compos Appl Sci Manuf2020; 139: 106128.
8.
ZhouWWenteTLiuD, et al.A comparative study of a quasi 3D woven composite with UD and 2D woven laminates. Compos Appl Sci Manuf2020; 139: 106139.
9.
SalehMNEl-DessoukyHMSaeedifarM, et al.Compression after multiple low velocity impacts of NCF, 2D and 3D woven composites. Compos Appl Sci Manuf2019; 125: 105576.
10.
CaiSLiYLiuH-Y, et al.Effect of electrospun polysulfone/cellulose nanocrystals interleaves on the interlaminar fracture toughness of carbon fiber/epoxy composites. Compos Sci Technol2019; 181: 107673.
11.
SprengerSKothmannMHAltstaedtV. Carbon fiber-reinforced composites using an epoxy resin matrix modified with reactive liquid rubber and silica nanoparticles. Compos Sci Technol2014; 105: 86–95.
12.
HsiehTKinlochATaylorA, et al.The effect of carbon nanotubes on the fracture toughness and fatigue performance of a thermosetting epoxy polymer. J Mater Sci2011; 46: 7525–7535.
13.
SubagiaIDGAJiangZTijingLD, et al.Hybrid multi-scale basalt fiber-epoxy composite laminate reinforced with electrospun polyurethane nanofibers containing carbon nanotubes. Fibers Polym2014; 15: 1295–1302.
14.
GojnyFHWichmannMHGKöpkeU, et al.Carbon nanotube-reinforced epoxy-composites: enhanced stiffness and fracture toughness at low nanotube content. Compos Sci Technol2004; 64(15): 2363–2371.
15.
ZhengNLiuH-YGaoJ, et al.Synergetic improvement of interlaminar fracture energy in carbon fiber/epoxy composites with nylon nanofiber/polycaprolactone blend interleaves. Compos B Eng2019; 171: 320–328.
16.
WuZYiX-SWilkinsonA. Interlaminar fracture toughness of carbon fibre/RTM6-2 composites toughened with thermoplastic-coated fabric reinforcement. Compos B Eng2017; 130: 192–199.
17.
WangWTakaoYMatsubaraT, et al.Improvement of the interlaminar fracture toughness of composite laminates by whisker reinforced interlamination. Compos Sci Technol2002; 62(6): 767–774.
18.
YamashitaSHattaHTakeiT, et al.Interlaminar reinforcement of laminated composites by addition of oriented whiskers in the matrix. J Compos Mater1992; 26(9): 1254–1268.
19.
AbdelalNRAljarrahMT. The effect of silicon carbide whiskers on the mode I interlaminar fracture of carbon fiber composites. Ceram Int2018; 44(3): 2700–2708.
20.
TengWWangJWuJ, et al.Rapid synthesis of alpha calcium sulfate hemihydrate whiskers in glycerol-water solution by using flue-gas-desulfurization gypsum solid waste. J Cryst Growth2018; 496-497: 24–30.
21.
ZhangXWangXJinB, et al.Crystal structure formation of hemihydrate calcium sulfate whiskers (HH-CSWs) prepared using FGD gypsum. Polyhedron2019; 173: 114140.
22.
GaoXWangMCaoJ, et al.In-situ polymerization modified calcium sulfate whiskers and their application in PP composites research. Polym Compos2024; 45(14): 13405–13417.
23.
XuRMiaoJLuS, et al.Tensile and fracture behavior of engineered cementitious composite with polyethylene fibers and calcium sulfate whiskers. Constr Build Mater2025; 460: 139806.
24.
WangDChenCWangY, et al.Influence of modified calcium sulfate hemihydrate whisker on the physical, mechanical, and microscopic properties of gypsum matrix composites. Constr Build Mater2023; 394: 132280.
25.
LandisCMMcMeekingRM. A shear-lag model for a broken fiber embedded in a composite with a ductile matrix. Compos Sci Technol1999; 59(3): 447–457.
26.
OkabeTTakedaN. Elastoplastic shear-lag analysis of single-fiber composites and strength prediction of unidirectional multi-fiber composites. Compos Appl Sci Manuf2002; 33(10): 1327–1335.
