In this study, a hybrid metal matrix composite reinforced with a combination of ceramic (SiC) and agro-waste (CDA) particles is developed using stir-casting technique coupled with an ultrasonic transducer. Developed samples were thoroughly examined on microstructural aspects using Optical Microscopy (OM), Field Emission Scanning Electron Microscopy (FESEM) with elemental mapping, and X-ray diffraction (XRD) techniques, which revealed reinforcement particle presence and their homogeneous dispersion throughout the matrix. The synthesized samples were examined for their physical and mechanical characteristics, revealing that the porosity of all samples was less than 2%. The composite containing an equal weight percentage (2.5% CDA and 2.5% SiC) of reinforcement exhibits a 32.72% increase in hardness and a 46.48% increase in tensile strength compared to the as-cast alloy. The FESEM analysis of tensile fractured surfaces revealed the presence of ductile dimples, river lines, cleavage features, particle cracks, and pull-out fractures indicating different mode of fractures. The study demonstrates that the Al7075-CDA/SiC hybrid composite offers superior mechanical performance compared to conventional Al7075, making it a promising material for applications in automobile piston, brake caliper and wheels.
BeldarPKumavatHR. Comparative analysis of mechanical properties of SiC particle addition on Al6061/Ni and Al6061/Cr metal matrix composites. Mater Lett2024; 369(May): 136745. DOI: 10.1016/j.matlet.2024.136745.
2.
BaradeswaranAPerumalAE. Wear and mechanical characteristics of Al 7075/graphite composites. Compos. Part B Eng2014; 56: 472–476. DOI: 10.1016/j.compositesb.2013.08.073.
3.
VermaPKSinghA. Microstructure evolution and mechanical properties of aluminium matrix composites reinforced with CoMoMnNiV high-entropy alloy. Int J Met2023; 18: 546–563. DOI: 10.1007/s40962-023-01042-5.
4.
MajzoobiGHAbbasiF. On the effect of shot-peening on fretting fatigue of Al7075-T6 under cyclic normal contact loading. Surf Coat Technol2017; 328: 292–303. DOI: 10.1016/j.surfcoat.2017.08.067.
5.
LakshmananMSelwinRajaduraiJChakkravarthyV, et al.Wear and EBSD studies on (SiC/NiTi) reinforced Al7075 composite. Mater Lett2020; 272: 127879. DOI: 10.1016/j.matlet.2020.127879.
6.
KumarSVermaPKLovevanshiBS. Effect of thermal ageing on mechanical and microstructural characteristics of bimodal hybrid AA6082/TiO2np/SiCp composite. Compos Interfaces. 2025; 32: 1–21. DOI: 10.1080/09276440.2025.2473170.
7.
VermaPKSinghABaisUPS, et al.Microstructure, mechanical, and tribological characteristics of heat-treated AA7075 composite reinforced with high-entropy alloy particles. J Tribol2025; 147(OCTOBER 2025): 101401. DOI: 10.1016/j.matchemphys.2024.130195.
8.
ManikandanRArjunanTV. Microstructure and mechanical characteristics of CDA–B4C hybrid metal matrix composites. Met Mater Int2021; 27(5): 885–899. DOI: 10.1007/s12540-019-00518-6.
9.
Saravana KumarMMohanERobinsonS, et al.Comparative study on morphological, physical and mechanical characteristics of L-PBF based AlSi10Mg parts with conventional stir casted Al-10 %SiC composites. Silicon2022; 14(6): 2695–2706. DOI: 10.1007/s12633-021-01065-9.
10.
Saravana KumarM. Assessment on morphological and mechanical properties of silicon nitride and goat dung ash reinforced Al-Fe-Si alloy hybrid composites. Mater Today Commun2022; 31(May): 103716. DOI: 10.1016/j.mtcomm.2022.103716.
11.
VenkateshLArjunanTVRavikumarK. Microstructural characteristics and mechanical behaviour of aluminium hybrid composites reinforced with groundnut shell ash and B4C. J Braz Soc Mech Sci Eng2019; 41(7): 295. DOI: 10.1007/s40430-019-1800-1.
12.
ManikandanRArjunanTVAkhilAR. Studies on micro structural characteristics, mechanical and tribological behaviours of boron carbide and cow dung ash reinforced aluminium (Al 7075) hybrid metal matrix composite. Compos. Part B Eng2020; 183: 107668. DOI: 10.1016/j.compositesb.2019.107668.
13.
MostafaNHIsmarrubieZNSapuanSM, et al.Fibre prestressed composites: theoretical and numerical modelling of unidirectional and plain-weave fibre reinforcement forms. Compos Struct2017; 159: 410–423. DOI: 10.1016/j.compstruct.2016.09.090.
14.
MostafaNHIsmarrubieZNSapuanSM, et al.Effect of fabric biaxial prestress on the fatigue of woven E-glass/polyester composites. Mater Des2016; 92: 579–589. DOI: 10.1016/j.matdes.2015.12.109.
15.
DursunTSoutisC. Recent developments in advanced aircraft aluminium alloys. Mater Des2014; 56: 862–871. DOI: 10.1016/j.matdes.2013.12.002.
16.
SevikHKurnazSC. Properties of alumina particulate reinforced aluminum alloy produced by pressure die casting. Mater Des2006; 27(8): 676–683. DOI: 10.1016/j.matdes.2005.01.006.
17.
FiresteinKLSteinmanAEGolovinIS, et al.Fabrication, characterization, and mechanical properties of spark plasma sintered Al-BN nanoparticle composites. Mater Sci Eng A2015; 642: 104–112. DOI: 10.1016/j.msea.2015.06.059.
18.
ZhangLXuHWangZ, et al.Mechanical properties and corrosion behavior of Al/SiC composites. J Alloys Compd2016; 678: 23–30. DOI: 10.1016/j.jallcom.2016.03.180.
19.
GarcesGBrunoGWannerA. Load transfer in short fibre reinforced metal matrix composites. Acta Mater2007; 55(16): 5389–5400. DOI: 10.1016/j.actamat.2007.06.003.
20.
CeschiniLMinakGMorriA, et al.Forging of the AA6061/23 vol.%Al2O3p composite: effects on microstructure and tensile properties. Mater Sci Eng A2009; 513–514(C): 176–184. DOI: 10.1016/j.msea.2009.01.057.
21.
SubramaniamBNatarajanBKaliyaperumalB, et al.Investigation on mechanical properties of aluminium 7075 - boron carbide - coconut shell fly ash reinforced hybrid metal matrix composites. China Foundry2018; 15(6): 449–456. DOI: 10.1007/s41230-018-8105-3.
22.
GikunooEOmotosoOOguochaINA. Effect of fly ash particles on the mechanical properties of aluminium casting alloy A535. Mater Sci Technol2005; 21(2): 143–152. DOI: 10.1179/174328405X18601.
23.
LovevanshiBSSoniPKDixitS. Experimental investigations on the development of hybrid metal matrix composite of Al7075 on microstructural, mechanical, and dry sliding aspects. J Tribol2023; 146: 1–21. DOI: 10.1115/1.4064020.
24.
AroraGSharmaS. A review on monolithic and hybrid metal–matrix composites reinforced with industrial-agro wastes. J Braz Soc Mech Sci Eng2017; 39(11): 4819–4835. DOI: 10.1007/s40430-017-0910-x.
25.
Mohd JoharudinNFLatifNAMustapaMS, et al.Effect of amorphous silica by rice husk ash on physical properties and microstructures of recycled aluminium chip AA7075. Mater Sci Eng Tech2019; 50(3): 283–288. DOI: 10.1002/mawe.201800229.
26.
AbotbinaWSapuanSMSultanMTH, et al.Development and characterization of cornstarch-based bioplastics packaging film using a combination of different plasticizers. Polymers (Basel)2021; 13(20): 3487. DOI: 10.3390/polym13203487.
27.
ArockiamNJJawaidMSabaN. Sustainable bio composites for aircraft components. Amsterdam, Netherlands: Elsevier Ltd, 2018. DOI: 10.1016/B978-0-08-102131-6.00006-2.
28.
MohantyAKVivekanandhanSPinJ, et al.Composites from renewable and sustainable resources: challenges and innovations. Science2018; 362: 536–542.
29.
OghenevwetaJEAigbodionVSNyiorGB, et al.Mechanical properties and microstructural analysis of Al–Si–Mg/carbonized maize stalk waste particulate composites. J King Saud Univ Eng Sci2016; 28(2): 222–229. DOI: 10.1016/j.jksues.2014.03.009.
30.
SureshkumarPUvarajaVC. Effect of ceramic and metallic reinforcement on mechanical, corrosion, and tribological behavior of aluminum composite by adopting design of experiment through Taguchi technique. J Tribol2018; 140(5): 052301. DOI: 10.1115/1.4039527.
31.
KumarRDhimanS. A study of sliding wear behaviors of Al-7075 alloy and Al-7075 hybrid composite by response surface methodology analysis. Mater Des2013; 50: 351–359. DOI: 10.1016/j.matdes.2013.02.038.
32.
VermaPKSinghA. Mechanical and dry sliding tribological characteristics of aluminium matrix composite reinforced with high entropy alloy particles. Tribol Int2024; 191: 109055. DOI: 10.1016/j.triboint.2023.109055.
33.
FangSChenWFuZ. Microstructure and mechanical properties of twinned Al0.5CrFeNiCo0.3C0.2 high entropy alloy processed by mechanical alloying and spark plasma sintering. Mater Des2014; 54: 973–979. DOI: 10.1016/j.matdes.2013.08.099.
34.
AlanemeKKAkintundeIBOlubambiPA, et al.Fabrication characteristics and mechanical behaviour of rice husk ash - alumina reinforced Al-Mg-Si alloy matrix hybrid composites. J Mater Res Technol2013; 2(1): 60–67. DOI: 10.1016/j.jmrt.2013.03.012.
35.
KumarSDixitGDixitS. Effect of TiO2–SiC and heat treatment on tribological characteristics of bimodal hybrid aluminum composites under dry sliding condition. J Tribol2024; 146(10): 1–11. DOI: 10.1115/1.4065602.
36.
KumarSDixitGDixitS. Investigating microstructural and mechanical behavior of stir-squeeze cast TiO2–SiC/Al6082 bimodal hybrid composites. J Mater Res Technol2023; 26: 150–163. DOI: 10.1016/j.jmrt.2023.07.186.
37.
SadhuKKMandalNSahooRR. SiC/graphene reinforced aluminum metal matrix composites prepared by powder metallurgy: a review. J Manuf Process2023; 91: 10–43. DOI: 10.1016/j.jmapro.2023.02.026.
38.
ZengXLiuWXuB, et al.Microstructure and mechanical properties of Al–SiC nanocomposites synthesized by surface-modified aluminium powder. Metals2018; 8(4): 253. DOI: 10.3390/met8040253.
39.
ArulrajMPalaniPK. Parametric optimization for improving impact strength of squeeze cast of hybrid metal matrix (LM24–SiCp–coconut shell ash) composite. J Braz Soc Mech Sci Eng2018; 40(1): 2–10. DOI: 10.1007/s40430-017-0925-3.
40.
ShaikhMBNAzizTArifS, et al.Effect of sintering techniques on microstructural, mechanical and tribological properties of Al-SiC composites. Surf Interfaces2020; 20(March): 100598. DOI: 10.1016/j.surfin.2020.100598.
41.
VarunBGopiSManikandanR. Experimental studies on the effects of reinforcing cowpat ash with aluminium composites. Proc Inst Mech Eng Part E J Process Mech Eng2023; 237(5): 1888–1899. DOI: 10.1177/09544089221129862.
42.
AhamadNMohammadARinawaML, et al.Correlation of structural and mechanical properties for Al-Al2O3-SiC hybrid metal matrix composites. J Compos Mater2021; 55(23): 3267–3280. DOI: 10.1177/00219983211011537.
43.
Hassanzadeh-AghdamMKAnsariRMahmoodiMJ. Micromechanical estimation of biaxial thermomechanical responses of hybrid fiber-reinforced metal matrix nanocomposites containing carbon nanotubes. Mech Mater2018; 119: 1–15. DOI: 10.1016/j.mechmat.2018.01.002.
44.
MuDKQZhangZXieYH, et al.The microstructures and mechanical properties of a 5 vol% SiC/AA2024 nanocomposite fabricated by powder metallurgy. Mater Charact2021; 175: 111090. DOI: 10.1016/j.matchar.2021.111090.
45.
FathyASadounAAbdelhameedM. Effect of matrix/reinforcement particle size ratio (PSR) on the mechanical properties of extruded Al-SiC composites. Int J Adv Manuf Technol2014; 73(5–8): 1049–1056. DOI: 10.1007/s00170-014-5901-9.
46.
PandianVKannanS. Processing and preparation of aerospace-grade aluminium hybrid metal matrix composite in a modified stir casting furnace integrated with mechanical supersonic vibration squeeze infiltration method. Mater Today Commun2021; 26: 101732. DOI: 10.1016/j.mtcomm.2020.101732.
47.
RenSHeXQuX, et al.Effect of Mg and Si in the aluminum on the thermo-mechanical properties of pressureless infiltrated SiCp/Al composites. Compos Sci Technol2007; 67(10): 2103–2113. DOI: 10.1016/j.compscitech.2006.11.006.
48.
AlanemeKKAdemiluaBOBodunrinMO. Mechanical properties and corrosion behaviour of aluminium hybrid composites reinforced with silicon carbide and bamboo leaf ash. Tribol Ind2013; 35(1): 25–35.
49.
AlanemeaKKAdewaleaTM. Influence of rice husk ash - Silicon carbide weight ratios on the mechanical behaviour of Al-Mg-Si alloy matrix hybrid composites. Tribol Ind2013; 35(2): 163–172.
50.
HamidAAGhoshPKJainSC, et al.The influence of porosity and particles content on dry sliding wear of cast in situ Al(Ti)-Al2O3(TiO2) composite. Wear2008; 265(1–2): 14–26. DOI: 10.1016/j.wear.2007.08.018.
51.
BaghelSSSoniPK. Mechanical and metallurgical characterization of friction stir welded AA2024 to pure copper using specific variables and positioning. Proc Inst Mech Eng Part C J Mech Eng Sci2024; 238(11): 5014–5025. DOI: 10.1177/09544062231217610.
52.
ShaMWuSWanL. Combined effects of cobalt addition and ultrasonic vibration on microstructure and mechanical properties of hypereutectic Al-Si alloys with 0.7% Fe. Mater Sci Eng A2012; 554: 142–148. DOI: 10.1016/j.msea.2012.06.026.
53.
BalasubramanianIMaheswaranR. Effect of inclusion of SiC particulates on the mechanical resistance behaviour of stir-cast AA6063/SiC composites. Mater Des2015; 65: 511–520. DOI: 10.1016/j.matdes.2014.09.067.
54.
CroteauJFPai KulyadiEKaleC, et al.Effect of strain rate on tensile mechanical properties of high-purity niobium single crystals for SRF applications. Mater Sci Eng A2020; 797: 140258. DOI: 10.1016/j.msea.2020.140258.
BaradeswaranAElaya PerumalA. Study on mechanical and wear properties of Al 7075/Al2O 3/graphite hybrid composites. Compos Part B Eng2014; 56: 464–471. DOI: 10.1016/j.compositesb.2013.08.013.
57.
ZhangZChenDL. Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites. Mater Sci Eng A2008; 483–484(1-2 C): 148–152. DOI: 10.1016/j.msea.2006.10.184.
58.
GuptaVSinghBMishraRK. Microstructural and mechanical characterization of novel AA7075 composites reinforced with rice husk ash and carbonized eggshells. Proc Inst Mech Eng Part L J Mater Des Appl2021; 235(12): 2666–2680. DOI: 10.1177/14644207211031265.
59.
GuptaVSinghBMishraRK. Tribological characteristics of AA7075 composites reinforced with rice husk ash and carbonized eggshells. Proc Inst Mech Eng Part L J Mater Des Appl2021; 235(11): 2600–2613. DOI: 10.1177/14644207211025810.
60.
JosephOODirisuJOAtibaJ, et al.Mechanical, and corrosive properties of AA7075 aluminium reinforced with rice husk ash particulates. Mater Res Express2023; 10(11): 116520. DOI: 10.1088/2053-1591/ad0dd3.
61.
SuryaMSPrasanthiG. Effect of SiC weight percentage on tribological characteristics of Al7075/SiC composites. Silicon2022; 14(3): 1083–1092. DOI: 10.1007/s12633-020-00885-5.
62.
RaoTB. An experimental investigation on mechanical and wear properties of Al7075/SiCp composites: effect of SiC content and particle size. J Tribol2018; 140(3): 1–8. DOI: 10.1115/1.4037845.
