Woven fabric thermoplastic composites possess high specific strength and stiffness along with thermoformability. To utilize the full potential of these materials to achieve better crash-safe designs in automotive structural parts, their crash behavior must be predicted accurately. For reliable crash simulations, strain rate-dependent material data and equally capable material modeling are required. In this study, quasi-static and high-speed tests are carried out to measure tensile and in-plane shear properties. A strain rate-dependent continuum damage mechanics model is formulated to describe the deformation and damage behavior of woven glass fabric composites. Tensile and in-plane shear tests on a lab scale are used to calibrate the material parameters of the model. The model was implemented as a user-defined material subroutine (VUMAT) for Abaqus. Experimental results from coupon tests were used to verify the results of a single-element simulation. Finally, a structural level dynamic crash test of a u-profile on a drop tower was used to validate the predictions of the user material model.
OberhoferGVoglerMGeseH, et al.Modeling endless fiber reinforced polymers in crashworthiness simulation. Hohenkammer, 2019.
2.
CoultonJ. CAE of thermoplastic woven glass composite. Ulm Germany, 2012.
3.
Maimí VertPCamanhoPMPR de CMayugo MajóJA, et al.A thermodynamically consistent damage model for advanced composites. Hampton, Virginia: National Aeronautics and Space Administration, Langley Research Center, http://dugi-doc.udg.edu//handle/10256/7898 (2006, accessed 24 Jun 2015).
4.
HackMFarkasLLiefoogheC, et al.Addressing automotive engineering challenges in composite development by simulation. NAFEMS Benchmark Magazine, http://orbi.ulg.ac.be/handle/2268/184940 (2015, accessed 21 Mar 2016).
IannucciL. Progressive failure modelling of woven carbon composite under impact. Int J Impact Eng2006; 32(6): 1013–1043.
9.
PickettAK. Review of finite element simulation methods applied to manufacturing and failure prediction in composites structures. Appl Compos Mater2002; 9(1): 43–58.
10.
LadevezePLeDantecE. Damage modelling of the elementary ply for laminated composites. Composites Sci Technology1992; 43(3): 257–267.
BažantZPOhBH. Crack band theory for fracture of concrete. Mat Constr1983; 16(3): 155–177.
15.
PinhoSTIannucciLRobinsonP. Physically based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking. Part II: FE implementation. Composites Part A: Appl Sci Manufacturing2006; 37(5): 766–777.
16.
Van PaepegemWDe BaereIDegrieckJ. Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites. Part I: experimental results. Composites Sci Technology2006; 66(10): 1455–1464.
17.
Van PaepegemWDe BaereIDegrieckJ. Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites. Part II: model development and finite element simulations. Composites Sci Technology2006; 66(10): 1465–1478.
18.
MandelUTaubertRHinterhölzlR. Mechanism based nonlinear constitutive model for composite laminates subjected to large deformations. Compos Structures2015; 132: 98–108.
19.
JohnsonAF. Modelling fabric reinforced composites under impact loads. Composites Part A: Appl Sci Manufacturing2001; 32(9): 1197–1206.
20.
VUMAT for fabric reinforced composites. Dassault Systemes; 2008.
21.
AhmadBFangX. Modeling shear behavior of woven fabric thermoplastic composites for crash simulations. Appl Compos Mater2020; 27(6): 739–765.
22.
MatzenmillerALublinerJTaylorRL. A constitutive model for anisotropic damage in fiber-composites. Mech Mater1995; 20(2): 125–152.
23.
PinhoSTRobinsonPIannucciL. Fracture toughness of the tensile and compressive fibre failure modes in laminated composites. Composites Sci Technology2006; 66(13): 2069–2079.
ISO 527-4:1997. Plastics - determination of tensile properties -- part 4: test conditions for isotropic and orthotropic fibre-reinforced plastic composites. http://www.iso.org/iso/catalogue_detail.htm?csnumber=4595 (2016, accessed 18 Nov 2016).
26.
LiJFangX. Stress wave analysis and optical force measurement of servo-hydraulic machine for high strain rate testing. Exp Mech2014; 54(8): 1497–1501.
27.
FangXFGramsR. A novel method for oscillation-free determination of material properties during high speed tests. ASTM Journal of Material testing and evaluation, 2019.
28.
FangXFGramsR. Neue entwicklungen in der materialprüfung bei sehr hohen dehnraten. Berlin, 2017.
LeeMHSordeletDJ. Evidence for adiabatic heating during fracture of W-reinforced metallic glass composites. Appl Phys Lett2006; 88(26): 261902.
31.
SiviourCRJordanJL. High strain rate mechanics of polymers: a review. J Dynamic Behavior Mater2016; 2(1): 15–32.
32.
SoriniCChattopadhyayAGoldbergRK. Micromechanical modeling of the effects of adiabatic heating on the high strain rate deformation of polymer matrix composites. Compos Structures2019; 215: 377–384.
33.
CuiJWangSWangS, et al.The effects of strain rates on mechanical properties and failure behavior of long glass fiber reinforced thermoplastic composites. Polymers (Basel)2019; 11(12): 2019. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6960868/
34.
ISO 14129:1997. Fibre-reinforced plastic composites -- determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method. Geneva, Switzerland: International Standard published, 1997.
35.
ASTM D6641/D6641M-14. Standard test method for compressive properties of polymer matrix composite materials using a combined loading compression (CLC) test fixture, 2021.
36.
WisnomMR. The effect of specimen size on the bending strength of unidirectional carbon fibre-epoxy. Compos Structures1991; 18(1): 47–63.
37.
WisnomMR. Size effects in the testing of fibre-composite materials. Composites Sci Technology1999; 59(13): 1937–1957.
38.
BaranGRMcCoolJIBoberickKG, et al.Size effect in resin/glass composite flexure strengths. J Oral Rehabil1999; 26(10): 775–780.
