The paper presents a numerical technique for an evaluation of effective viscoelastic properties of fiber reinforced composite materials based on known mechanical properties of fibers and matrix. The set of numerical relaxation tests allowed calculating the tabular dependencies of components of a relaxation tensor for composite orthogonal weaving scheme, as well as technical parameters of viscoelastic material on time and temperature. These dependencies were approximated by exponential Prony series for the time variable and Williams–Landel–Ferry shift function for the temperature variable. The analysis of the obtained mechanical properties shows that despite the orthotropic nature of viscoelasticity of the considered composite material, the temperature dependencies of Young and shear moduli as well as Poisson’s ratios reflected by the shift function has the same character as the ones of the composite matrix.
GuojunH. A theoretical and numerical study of crack propagation along a bimaterial interface with applications to IC packaging, Singapore: National University of Singapore, 2006.
4.
KohlJGBierwischNNgoTTet al.Determining the viscoelastic behavior of polyester fiberglass composite by continuous micro-indentation and friction properties. Wear2016; 350–351: 63–67.
5.
RopersSKardosMOsswaldTA. A thermo-viscoelastic approach for the characterization and modeling of the bending behavior of thermoplastic composites. Compos Part A: Appl Sci Manuf2016; 90: 22–32.
6.
KwonSAdachiTArakiWet al.Thermo-viscoelastic properties of silica particulate-reinforced epoxy composites: Considered in terms of the particle packing model. Acta Mater2006; 54: 3369–3374.
7.
DasR. Stress relaxation behavior of carbon fiber-epoxy prepreg composites during and after cure, Bangladesh: Bangladesh University of Engineering and Technology, 2012.
8.
AbouhamzehMSinkeJJansenKMBet al.Kinetic and thermo-viscoelastic characterisation of the epoxy adhesive in GLARE. Compos Struct2015; 124: 19–28.
9.
AmadoriSCataniaG. Robust identification of the mechanical properties of viscoelastic non-standard materials by means of frequency domain experimental measurements. Compos Struct2017; 169: 79–89. DOI: 10.1016/j.compstruct.2016.11.029.
10.
FengJGuoZ. Temperature-frequency-dependent mechanical properties model of epoxy resin and its composites. Compos Part B: Eng2016; 85: 161–169.
11.
MontazeriAMontazeriN. Viscoelastic and mechanical properties of multi walled carbon nanotube/epoxy composites with different nanotube content. Mater Des2011; 32: 2301–2307.
12.
OzakiHNakadaMUzawaKet al.Effect of stamping condition on age deformation of textile carbon fiber reinforced polycarbonate laminates. J Reinf Plast Compos2015; 34: 19–27.
13.
AltenbachHFedorovVA. Structural elastic and creep models of a UD composite in longitudinal shear. Mech Compos Mater2007; 43: 289–298.
14.
MuddasaniMSawantSMulianaA. Thermo-viscoelastic responses of multilayered polymer composites: Experimental and numerical studies. Compos Struct2010; 92: 2641–2652.
15.
UpadhyayaPUpadhyayCS. A three-dimensional micromechanical model to predict the viscoelastic behavior of woven composites. Compos Struct2011; 93: 2733–2739.
16.
LevinVKanaunSRonquillo JarilloG. Effective properties of viscoelastic media with crack-like inclusions. Int J Rock Mech Min Sci2012; 53: 1–9.
17.
Hoang-DucHBonnetG. Effective properties of viscoelastic heterogeneous periodic media: An approximate solution accounting for the distribution of heterogeneities. Mech Mater2013; 56: 71–83.
18.
AndrianovIVDanishevs’kyyVVGuilletAet al.Effective properties and micro-mechanical response of filamentary composite wires under longitudinal shear. Eur J Mech – A/Solids2005; 24: 195–206.
19.
ZadehSDL’vovGI. Numerical procedure of determining the effective mechanical characteristics of an aligned fiber composite. Strength Mater2015; 47: 536–543.
20.
YangLWuZCaoYet al.Micromechanical modelling and simulation of unidirectional fibre-reinforced composite under shear loading. J Reinf Plast Compos2015; 34: 72–83.
21.
PathanMVTagarielliVLPatsiasS. Numerical predictions of the anisotropic viscoelastic response of uni-directional fibre composites. Compos Part A: Appl Sci Manuf2017; 93: 18–32.
22.
PathanMVPatsiasSRongongJet al.Measurements and predictions of the viscoelastic properties of a composite lamina and their sensitivity to temperature and frequency. Compos Sci Technol2017; 149: 207–219–207–219. . DOI: 10.1016/j.compscitech.2017.06.005.
23.
JainDMukherjeeAKwatraN. Topological disorder of microstructure in fiber-reinforced polymer composites: Diffusion response. J Reinf Plast Compos2015; 34: 49–59.
24.
SeifertOESchumacherSCHansenAC. Viscoelastic properties of a glass fabric composite at elevated temperatures: experimental and numerical results. Compos Part B: Eng2003; 34: 571–586.
25.
LiHZhangBBaiG. Effects of constructing different unit cells on predicting composite viscoelastic properties. Compos Struct2015; 125: 459–466.
WilliamsMLLandelRFFerryJD. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids. J Am Chem Soc1955; 77: 3701–3707.
28.
KrizRDStinchcombWW. Elastic moduli of transversely isotropic graphite fibers and their composites. Exp Mech1979; 19: 41–49.
MulianaAHSawantS. Responses of viscoelastic polymer composites with temperature and time dependent constituents. Acta Mech2009; 204: 155–173.
31.
PathanMVTagarielliVLPatsiasSet al.A new algorithm to generate representative volume elements of composites with cylindrical or spherical fillers. Compos Part B: Eng2017; 110: 267–278.
32.
PathanMVTagarielliVLPatsiasS. Effect of fibre shape and interphase on the anisotropic viscoelastic response of fibre composites. Compos Struct2017; 162: 156–163.
33.
SchaperyR. On the characterization of nonlinear viscoelastic materials. Polym Eng Sci1969; 9: 295–310.
