Sage Journals: Discover world-class research

Abstract

Since holes comprise the necessary features of many structural components, a comprehensive understanding of the behavior of composite plates containing an open hole is a crucial step in their design process. In the present manuscript, an extensive numerical study has been conducted in order to investigate the effects of material nonlinearity on the stress distribution and stress concentration factors in unidirectional and laminated composite materials. To attain this objective, various models with different configurations were studied. In unidirectional composites, the maximum deviation of stress distribution around the hole (from the linear solution) happens in 45° lamina in which includes a high level of shear stress. However, the maximum difference in the stress concentration factor occurs in 15° lamina and is 15.1% at the onset of failure. In composite laminates, the maximum deviation of nonlinear stress concentration factor from the linear solution is reported 24.3% and it occurs in [+45/−45] _s laminate. In the last section, Neuber’s rule is employed to find the stress concentration factors of the laminated composites, with a reasonable accuracy.

Keywords

Material nonlinearity stress concentration factor plate with an open hole Neuber’s rule

Get full access to this article

View all access options for this article.

References

Pilkey WD. Peterson’s stress concentration factors. Ch. 4. 2nd ed. New York: John Wiley and sons, Inc., 1997.

Lekhnitskii

. Anisotropic plates, Routledge, New York: Gordon and Breach Science, 1968.

Savin GN. Stress concentration around holes. Ch. 1–5. London UK: Pergamon Press, 1961.

Bonora

Costanzi

Marchetti

. On closed form solution for the elastic stress field around holes in orthotropic composite plates under in-plane stress conditions. Compos Struct 1993; 25: 139–156.

Bonora

Costanzi

Marchetti

. A computational procedure to calculate stress-strain field around simple shape holes in composite laminates. Compos Struct 1994; 53: 1167–1179.

Choi

Folias

. The 3D stress field in a laminated composite plate with a hole based on an h-r finite element method. Fail Mech in Adv Polym Compos ASME AMD 1994; 196: 31–42.

Chern

Tuttle

. On Displacement fields in orthotropic laminates containing an elliptical hole. J Appl Mech 2000; 67: 527–539.

Ukadgaonker

Rao

DKN

. A general solution for stresses around holes in symmetric laminates under inplane loading. Compos Struct 2000; 49: 339–354.

Ukadgaonker

Kakhandki

. Stress analysis for an orthotropic plate with an irregular shaped hole for different in-plane loading conditions – part I. Compos Struct 2005; 70: 255–274.

10.

Savruk

Kazberuk

Onyshko

. The influence of material anisotropy on the stress distribution near the parabolic notch. Phys Mech Mater 2015; 51: 24–33.

11.

Zappalorto

Carraro

. An engineering formula for the stress concentration factor of orthotropic composite plates. Compos Part B Eng 2015; 68: 51–58.

12.

Zappalorto M. On the stress state in rectilinear anisotropic thick plates with blunt cracks. Fatigue Fract Eng Mater Struct 2016; DOI: 10.1111/ffe.12479.

13.

Kazberuk

Savruk

Chornenkyi

. Stress distribution at sharp and rounded V-notches in quasi-orthotropic plane. Int J Solids Struct 2016; 85–86: 134–143.

14.

Bakhshi N. Stress concentration in laminated composites. Thesis, Iran University of Science and Technology, Mech Eng Dep, 2016.

15.

Lomakin EV and Fedulov BN. Nonlinear anisotropic elasticity for laminate composites. Meccanica 2015; 50: 1527–1535.

16.

Aboudi

. The nonlinear behavior of unidirectional and laminated composites – a micromechanical approach. J Reinf Plast Compos 1990; 9: 13–32.

17.

Sadeghian

Rahai

Ehsani

. Effect of fiber orientation on nonlinear behavior of CFRP composites. J Reinf Plast Compos 2009; 28: 2261–2272.

18.

Ogihara

. Nonlinear mechanical response of CFRP laminates under off-axis tensile loading. Sci Eng Compos Mater 2010; 17: 133–141.

19.

Andersons J, Modniks J and Sparnins E. Modeling the nonlinear deformation of flax-fiber-reinforced polymer matrix laminates in active loading. J Reinf Plast Compos 2015; 34: 248–256.

20.

Chang

Llu

Chang

. Damage tolerance of laminated composites containing an open hole and subjected to tensile loadings. J Compos Mater 1991; 25: 274–301.

21.

Chang

Lessard

. Damage tolerance of laminated composites containing an open hole and subjected to compressive loadings: part I-analysis. J Compos Mater 1989; 25: 2–43.

22.

Shokreieh

Lessard

. Effects of material nonlinearity on the three-dimensional stress state of pin-loaded composite laminates. J Compos Mater 1996; 30: 839–861.

23.

Baykara

. A comparison of stress concentrations in thin sheets with plastic anisotropy. J Reinf Plast Compos 2007; 26: 1455–1459.

24.

Hahn

Tsai

. Nonlinear elastic behavior of unidirectional composite laminae. J Compos Mater 1973; 7: 101–118.

25.

ABAQUS online documentation. Dassault systemes simulia Corp., 2012.

26.

Tsai

. A general theory of strength for anisotropic materials. J Compos Mater 1971; 5: 58–80.

27.

Neuber

. Theory of stress concentration for shear strained prismatic bodies with nonlinear stress–strain law. J Appl Mech 1961; 28: 544–550.

28.

Zappalorto

Lazzarin

. A new version of the Neuber rule accounting for the influence of the notch opening angle for out-of-plane shear loads. Int J Solids Struct 2009; 46: 1901–1910.

29.

Zappalorto

Lazzarin

. A unified approach to the analysis of nonlinear stress and strain fields ahead of mode III-loaded notches and cracks. Int J Solids Struct 2010; 47: 851–864.

30.

Zappalorto

Lazzarin

. Some remarks on the Neuber rule applied to a control volume surrounding sharp and blunt notch tips. Fatigue Fract Eng Mater Struct 2014; 37: 349–358.

31.

Zappalorto

Lazzarin

. Neuber’s rules and other solutions: Theoretical differences, formal analogies and energy interpretations. Theor Appl Fract Mech 2015; 79: 2–13.

Neuber’s rule accounting for the material nonlinearity influence on the stress concentration of the laminated composites

Abstract

Keywords

Get full access to this article

References