Ex-situ method for toughening glass/epoxy composites by interlaminar films made of polyetherketone cardo and calcium sulfate whisker

Abstract

Epoxy matrix composites were toughened by introducing films into fiberglass fabric layers based on an ex-situ vacuum-assisted resin transfer molding technique. The mixture films were made of a certain polyetherketone cardo and calcium sulfate whiskers with different mass percent. The toughening mechanism was studied by dynamic mechanical thermal analysis and scanning electron microscopy. The addition of calcium sulfate whisker changed glass transition temperatures of Epoxy Resin (EP) and polyetherketone cardo, indicating that films with calcium sulfate whisker were melting during the curing of epoxy resin and forming the mixture of EP phase, polyetherketone cardo phase, and calcium sulfate whisker between the layers of composites. Meanwhile, the results indicated that calcium sulfate whiskers and fiberglass fabric formed three-dimensional structure between the layers of composites to toughen the composites. The results of the mechanical properties show that the interlaminar shear strength and fracture toughness (G_IC) were obviously improved meanwhile tensile strength and flexural strength kept stable whether the addition of films or not. Maximum values of the interlaminar shear strength and fracture toughness (G_IC) were 22% and 95% higher than that of the controlled specimens without films, respectively. The interlaminar mechanical properties improved with the addition of films made of polyetherketone cardo and calcium sulfate whisker, which is benefit for the improvement of whole mechanical properties and wide usage of laminate composites.

Keywords

Interlaminar mechanical properties ex-situ vacuum-assisted resin transfer molding technique calcium sulfate whiskers polyetherketone cardo interlaminar toughness

Get full access to this article

View all access options for this article.

References

Masuelli

. Fiber reinforced polymers – the technology applied for concrete repair, 1st ed. Croatia: Intech, 2013, pp. 3–3.

Stenzenberger

. Recent developments of thermosetting polymers for advanced composites. Compos Struct 1993; 24: 219–231.

Mouritz

Baini

Herszberg

. Mode I interlaminar fracture toughness properties of advanced textile fibreglass composites. Appl Sci Manufact 1999; 30: 859–870.

Gilbert

Hayes

Seferis

. Interlayer toughened unidirectional carbon prepreg systems: effect of preformed particle morphology. Appl Sci Manufact 2003; 34: 245–252.

Woo

Mao

. Evaluation of interlaminar-toughened poly (ether lmide)-modified epoxy/carbon fiber composites. Polym Compos 1996; 17: 799–805.

Yun

Won

Kim

. Toughening of carbon fiber/epoxy composite by inserting polysulfone film to form morphology spectrum. Polymer 2004; 45: 6953–6958.

Hamer

Leibovich

Green

. Mode I and Mode II fracture energy of MWCNT reinforced nanofibrilmats interleaved carbon/epoxy laminates. Compos Sci Technol 2014; 90: 48–56.

Tang

. Ex-situ formation of periodic inter-layer structure to significantly improve the impact damage resistance of carbon laminates. Adv Eng Mater 2002; 14: 3117–3122.

Tang

. Toughness improvement of carbon laminates by periodic interleaving thin thermoplastic films. J Mater Sci Lett 2002; 21: 1763–1765.

10.

Long

. A preliminary study on resin transfer molding of highly toughed carbon laminates by ex-situ method. J Mater Sci Lett 2003; 22: 1763–1765.

11.

. Effect of interleaf sequence on impact damage and residual strength in a graphite/epoxy laminate. J Mater Sci Lett 2004; 22: 3253–3255.

12.

Cheng

Liu

. Preform-based toughening technology for RTMable high-temperature aerospace composites. Sci China Technol Sci 2012; 55: 2255–2263.

13.

Yamashita

Hatta

Takei

. Interlaminar reinforcement of laminated composites by addition of oriented whiskers in the matrix. J Compos Mater 1992; 26: 1254–1268.

14.

Chen

Wang

. Mechanical, damping, and thermal properties of calcium sulfate whisker-filled castor oil-based polyurethane/epoxy IPN composites. J Reinf Plast Comp 2011; 30: 509–515.

15.

Sudheer

Vishwanathan

Raju

. Effect of potassium titanate whiskers on the performance of vacuum molded glass/epoxy composites. J Reinf Plast Comp 2013; 32: 1177–1187.

16.

Cheng

Fang

. “Ex situ” concept for toughening the RTMable BMI matrix composites, Part I: Improving the interlaminar fracture toughness. J Appl Polym Sci 2008; 109: 1625–1634.

17.

Ferry

. Viscoelastic properties of polymers 19802nd ed. John Wiley & Sons, pp. 41–41.

18.

Faulstich de Paiva

Frollini

. Unmodified and modified surface sisal fibers as reinforcement of phenolic and lignophenolic matrices composites: thermal analyses of fibers and composites. Macromol Mater Eng 2006; 291: 405–417.

19.

Ornaghi

Bolner

Fiorio

. Mechanical and dynamic mechanical analysis of hybrid composites molded by resin transfer molding. J Appl Polym Sci 2010; 118: 887–896.

20.

. Dynamic mechanical analysis of the seawater treated glass/polyester composites. Mater Des 2009; 30: 2774–2777.

21.

Cheng

Fang

. Ex-situ concept for toughening the RTMable BMI matrix composites. Part II. Improving the compression after impact. J Appl Polym Sci 2008; 108: 2211–2217.