The effect of zinc oxide (ZnO) 250 nm on the mechanical, thermal and morphological properties of the composites of poly(styrene-co-acrylonitrile) (SAN), poly(methyl methacrylate) (PMMA) and ZnO was investigated. The Young's modulus of 20SAN/PMMA/ZnO and 40SAN/PMMA/ZnO increased at low ZnO content. Increasing content of ZnO up to 0.5–1.0 wt% increased the impact strength of PMMA/SAN blends and then decreased. The addition of ZnO improved the thermal stability of polymer blends. The dielectric constant of 20SAN/PMMA/ZnO and 40SAN/PMMA/ZnO composites increased with increasing ZnO content. The dispersion of ZnO particles was relatively good and uniform throughout the entire polymer matrix.
SiengchinSKarger-KocsisJThomannR. Alumina-filled polystyrene micro- and nanocomposites prepared by melt mixing with and without latex precompounding: structure and properties. J Appl Polym Sci2007; 105: 2963–2972.
SupapholPThanomkiatPJunkasemJ. Non-isothermal melt-crystallization and mechanical properties of titanium(IV) oxide nanoparticle-filled isotactic polypropylene. Polym Test2007; 26: 20–37.
4.
YangKYangQLiG. Morphology and mechanical properties of polypropylene/calcium carbonate nanocomposites. Mater Lett2006; 60: 805–809.
5.
MallakpourSDinariM. Enhancement in thermal properties of poly(vinyl alcohol) nanocomposites reinforced with Al2O3 nanoparticles. J Reinf Plast Compos2013; 32: 217–224.
6.
HongJIWinbergPSchadlerLS. Dielectric properties of zinc oxide/low density polyethylene nanocomposites. Mater Lett2005; 59: 473–476.
7.
TangJWangYLiuH. Effects of organic nucleating agents and zinc oxide nanoparticles on isotactic polypropylene crystallization. Polymer2004; 45: 2081–2091.
8.
DangZFanLZhaoS. Dielectric properties and morphologies of composites filled with whisker and nanosized zinc oxide. Mater Res Bull2003; 38: 499–507.
9.
ZhengJSiegelRWToneyCG. Polymer crystalline structure and morphology changes in nylon-6/ZnO nanocomposites. J Polym Sci Part B: Polym Phys2003; 41: 1033–1050.
10.
HuangCKChenSWWeiWCJ. Processing and property improvement of polymeric composites with added ZnO nanoparticles through microinjection molding. J Appl Polym Sci2006; 102: 6009–6016.
11.
ChaeDWKimBC. Characterization on polystyrene/zinc oxide nanocomposites prepared from solution mixing. Polym Adv Technol2005; 16: 846–850.
12.
ZhengJOzisikRSiegelRW. Disruption of self-assembly and altered mechanical behavior in polyurethane/zinc oxide nanocomposites. Polymer2005; 46: 10873–10882.
13.
WacharawichanantSThongyaiSPhutthaphanA. Effect of particle sizes of zinc oxide on mechanical, thermal and morphological properties of polyoxymethylene/zinc oxide nanocomposites. Polym Test2008; 27: 971–976.
14.
ZamanHUHunPDKhanRA. Morphology, mechanical, and crystallization behaviors of micro- and nano-ZnO filled polypropylene composites. J Reinf Plast Compos2012; 31: 323–329.
TangEChengGMaX. Preparation of nano-ZnO/PMMA composite particles via grafting of the copolymer onto the surface of zinc oxide nanoparticles. Powder Technol2006; 161: 209–214.
17.
ShimJWKimJWHanSH. Zinc oxide/polymethylmethacrylate composite microspheres by in situ suspension polymerization and their morphological study. Colloid Surf A-Physicochem Eng Asp2002; 207: 105–111.
18.
TangEChengGPangX. Synthesis of nano-ZnO/poly(methyl methacrylate) composite microsphere through emulsion polymerization and its UV-shielding. Colloid Polym Sci2006; 284: 422–428.
19.
JangBNWilkieCA. The effects of clay on the thermal degradation behavior of poly(styrene-co-acrylonitirile). Polymer2005; 46: 9702–9713.
20.
StretzHAPaulDRLibR. Intercalation and exfoliation rlationships in melt-processed poly(styrene-co-acrylonitrile)/montmorillonite nanocomposites. Polymer2005; 46: 2621–2637.
21.
StretzHAPaulDRCassidyPE. Poly(styrene-co-acrylonitrile)/montmorillonite organoclay mixtures: a model system for ABS nanocomposites. Polymer2005; 46: 3818–3830.
22.
PalabiyikMBahadurS. Mechanical and tribological properties of polyamide 6 and high density polyethylene polyblends with and without compatibilizer. Wear2000; 246: 149–158.
FilipponeGDintcheva NTzAciernoD. The role of organoclay in promoting co-continuous morphology in high-density poly(ethylene)/poly(amide) 6 blends. Polymer2008; 49: 1312–1322.
25.
CalcagnoCIWMarianiCMTeixeiraSR. The role of the MMT on the morphology and mechanical properties of the PP/PET blends. Compos Sci Technol2008; 68: 2193–2200.
26.
LeeMHDanCHKimJH. Effect of clay on the morphology and properties of PMMA/poly(styrene-co-acrylonitrile)/clay nanocomposites prepared by melt mixing. Polymer2006; 47: 4359–4369.
27.
ZhengQDuMYangB. Relationship between dynamic rheological behavior and phase separation of poly(methyl methacrylate)/poly(styrene-co-acrylonitrile) blends. Polymer2001; 42: 5743–5747.
28.
WacharawichanantSThongyaiSTanodekaewS. Spinodal decomposition as a probe to measure the effects on molecular motion in poly(styrene-co-acrylonitrile) and poly(methyl methacrylate) blends after mixing with a low molar mass liquid crystal or commercial lubricant. Polymer2004; 45: 2201–2209.
29.
DuMGongJZhengQ. Dynamic rheological behavior and morphology near phase-separated region for a LCST-type of binary polymer blends. Polymer2004; 45: 6725–6730.
30.
LeeMLeeKMinBH. Phase separation behavior and morphologies of PMMA/poly(styrene-co-acrylonitrile)/clay nanocomposites prepared by solution mixing. J Appl Polym Sci2010; 117: 49–57.
31.
WenGLiXLiaoY. Surface phase separations of PMMA/SAN blends investigated by atomic force microscopy. Polymer2003; 44: 4035–4045.
32.
MédéricPVilleJHuitricJ. Effect of processing procedures and conditions on structural, morphological, and rheological properties of polyethylene/polyamide/nanoclay blends. Polym Eng Sci2011; 51: 969–978.
33.
ChoSHongJSLeeSJ. Morphology and rheology of polypropylene/polystyrene/clay nanocomposites in batch and continuous melt mixing processes. Macromol Mater Eng2011; 296: 341–348.
34.
DhibarAKKimJKKhatuaBB. Cocontinuous phase morphology of asymmetric compositions of polypropylene/high-density polyethylene blend by the addition of clay. J Appl Polym Sci2011; 119: 3080–3092.
Goitisolo I, González I and Eguiazábal JI. Effects of the location of the nanoclay at the interface on the mechanical properties of a maleic anhydride grafted polypropylene/polyamide 6/organoclay co-continuous blend. Polym Adv Technol 2012. DOI: 10.1002/pat.3085.
37.
SiengchinSKarger-KocsisJ. Binary and ternary composites of polystyrene, styrene–butadiene rubber and boehmite produced by water-mediated melt compounding: morphology and mechanical properties. Compos Part B2013; 45: 1458–1463.
38.
TeeTTSinLTGobinathR. Investigation of nano-size montmorillonite on enhancing polyvinyl alcohol-starch blends prepared via solution cast approach. Compos Part B2013; 47: 238–247.
39.
MaCCMChenYJKuanHC. Polystyrene nanocomposite materials-preparation, mechanical, electrical and thermal properties, and morphology. J Appl Polym Sci2006; 100: 508–515.
40.
ZhangSZhuADaiS. Coincorporation of nano-silica and nano-calcium carbonate in polypropylene. J Appl Polym Sci2011; 121: 3007–3013.
