Effect of forming temperature on the quality of hot diaphragm formed C-shaped thermosetting composite laminates

Abstract

Hot diaphragm-forming process is a promising technology for production of angle-shaped thermosetting composites with high efficiency and consistent quality. This technique can be used to form prepreg laminates with abrupt or complex structures before final cure in an autoclave. In this work, the mechanism of the forming process using double diaphragms for carbon fiber/epoxy resin prepreg laminate with C-shaped structure was discussed, and the effect of the forming temperature on the quality of formed laminate was investigated using a designed hot diaphragm-forming device. A testing system was set up to evaluate the frictional resistance of prepreg at different temperatures. The results indicate that a proper forming temperature is essential for quality control of the process and there is a close relationship between prepreg properties and forming qualities of parts.

Keywords

Carbon fiber-reinforced polymer composite prepreg buckling internal friction diaphragm forming

Get full access to this article

View all access options for this article.

References

Mills

. Automation of carbon fiber preform manufacture for affordable aerospace applications. Compos Pt A 2001; 32: 955–962.

Crossley

Schubel

Warrior

. Experimental determination and control of prepreg tack for automated manufacture. Plast Rubber Compos 2011; 40: 363–368.

Debout

Chanal

Duc

. Tool path smoothing of a redundant machine: application to automated fiber placement. Comput Aid Des 2011; 43: 122–132.

. Hot drape forming of composites. Aeronaut Manuf Technol 2009; S2: 113–116.

Chen

. Application of composite forming technique in military freighter A400M. Aeronaut Manuf Technol 2008; 10: 32–35.

Mallon

O’Bradaigh

. Development of a pilot autoclave for polymeric diaphragm forming of continuous fiber reinforced thermoplastics. Compos 1988; 19(1): 37–47.

Mallon

O’Bradaigh

Pipes

. Polymeric diaphragm forming of complex-curvature thermoplastic composite parts. Compos 1989; 20(1): 48–56.

O’Bradaigh

Mallon

. Effect of forming temperature on the properties of polymeric diaphragm formed thermoplastic composites. Compos Sci Technol 1989; 35: 235–255.

Smiley

Pipes

. Analysis of the diaphragm forming of continuous fiber reinforced thermoplastics. J Thermoplast Compos Mater 1988; 1: 298–321.

10.

Labeas

Watiti

Katsiropoulos

. Thermomechanical simulation of infrared heating diaphragm forming process for thermoplastic parts. J Thermoplast Compos Mater 2008; 21: 353–370.

11.

Bersee

HEN

Beukers

. Diaphragm forming of continuous fibre reinforced thermoplastics: influence of temperature, pressure and forming velocity on the forming of Upilex-Rw diaphragms. Compos Pt A 2002; 33(7): 949–958.

12.

Keane

Mulhern

Mallon

. Investigation of the effects of varying the processing parameters in diaphragm forming of advanced thermoplastic composite laminates. Compos Manuf 1995; 6(3–4): 145–152.

13.

Pantelakis

Baxevani

. Optimization of the diaphragm forming process with regard to product quality and cost. Compos Pt A 2002; 33: 459–470.

14.

Krebs

Friedrich

Bhattacharyya

. A direct comparison of matched-die versus diaphragm forming. Compos Pt A 1998; 29(A): 183–188.

15.

Walczyk

Hosford

Papazian

. Using reconfigurable tooling and surface heating for incremental forming of composite aircraft parts. J Manuf Sci Eng 2003; 125: 333–343.

16.

Ning

Vaidya

Janowski

. Design, manufacture and analysis of a thermal plastic composite frame structure for mass transit. Compos Struct 2007; 80: 105–116.

17.

Channer

Cosgriff

Smith

. Development of the double RIFT diaphragm forming process. J Reinf Plast Compos 2002; 21: 1629–1635.

18.

Lukaszewicz

DH-JA

Potter

. The internal structure and conformation of prepreg with respect to reliable automated processing. Compos Pt A 2011; 42: 283–292.

19.

Potter

. In-plane and out-of-plane deformation properties of unidirectional. Compos Pt A 2002; 33: 1469–1477.

20.

Martin

Seferis

Wilhelm

. Frictional resistance of thermaset prepregs and its influence on honeycomb composite processing. Compos Pt A 1996; 27(A): 943–951.

21.

Ersoy

Potter

Wisnom

. An experimental method to study the frictional processes during composites manufacturing. Compos Pt A 2005; 36(11): 1536–1544.