Sage Journals: Discover world-class research

Abstract

During bleeding autoclave processing, resin flow occurs inside composite laminates because of the utilization of bleeder materials. For the tapered laminates, the masses of bleeder materials placed on thick, tapered, and thin regions should be optimized to obtain appropriate fiber content with uniform distribution. This article mainly focuses on the carbon fiber fabric/epoxy resin-tapered laminates processed under different bleeder schemes, and the effects of bleeder schemes on the resin flow and fiber compaction. The resin pressure variations were studied by means of an on-line monitoring method to analyze the resin flow. Moreover, the resin pressure gradients and resin flow directions at different situations were given. The results demonstrate that the on-line resin pressure measuring system can provide important information for the investigated resin flow and fiber compaction of composite parts with different thickness regions. In addition, the mass and saturation degree of the bleeder materials strongly influence the resin pressure distribution and the flow direction. Resin flow continues within the laminates after the saturation of the bleeder materials, and hence, significantly impacts on the distribution of the fiber content. These observations provide a significant guidance for designing the bleeder scheme and controlling the fiber compaction.

Keywords

autoclave processing tapered laminates resin flow fiber compaction

Get full access to this article

View all access options for this article.

References

Campbell

Mallow

Browning

. Porosity in carbon fiber composites year overview of causes. J Adv Mater 1995; 26(4): 18–33.

Lynch

Hubert

Poursartip

. Use of a simple, inexpensive pressure sensor to measure hydrostatic resin pressure during processing of composite laminates. Polym Compos 1999; 20(4): 581–593.

Zhang

. Resin pressure measuring system for hot pressing of composites. Acta Mater Compos Sin 2007; 24(2): 23–27.

Tucker

III . Modeling and simulation of two-dimensional consolidation for thermoset matrix composites. Composites Part A 2002; 33(6): 877–892.

Hubert

Poursartip

. Aspects of the compaction of composite angle laminates: an experimental investigation. J Compos Mater 2001; 35(1): 2–26.

Hubert

Vaziri

Poursartip

. A two dimensional ﬂow model for the process simulation of complex shape composite laminates. Int J Numer Meth Eng 1999; 44(1): 1–26.

Zhang

. Numerical analysis of parametric effects on consolidation of angle-bended composite laminates. Polym Compos 2009; 30(10): 1510–1516.

Fernlund

Rahman

Courdji

Bresslauer

Poursartip

Willden

. Experimental and numerical study of the effect of cure cycle. Composites Part A 2002; 33(4): 341–351.

Deng

Zhang

. Experimental research on defects of L-shape laminates in vacuum-bag process. Acta Mater Compos Sin 2007; 24(4): 34–39.

10.

Zhang

. Numerical and experimental study on the effect of lay-up type and structural elements on thickness uniformity of L-shaped laminates. Appl Compos Mater 2009; 16(2): 101–115.

11.

Sun

Xin

Zhang

. Experimental analysis on thickness control of variable thickness composite laminates during autoclave process. Acta Mater. Compos Sin 2009; 26(5): 14–19.

12.

Zhang

Xie

. Experimental study on type and cause of defects in variable thickness composite laminates during hot pressing process. Acta Mater Compos Sin 2008; 25(2): 41–46.

13.

Xin

Luo

Zhang

. Resin pressure and resin flow inside tapered laminates during zero-bleeding and bleeding processes. J Reinf Plast Compos . Submitted.

14.

Xin

Zhang

. Online monitoring and analysis of resin pressure inside composite laminate during zero-bleeding autoclave process. Polym Compos 2011; 32(2): 314–323.

Study on the resin flow and fiber compaction of tapered composite laminates during autoclave processing

Abstract

Keywords

Get full access to this article

References