In this article analytical methods for predicting the mechanical properties of 2D woven composites with different weave patterns and materials are reviewed. These approaches are then evaluated by comparing them to experimental and numerical results.
AkkermanR. Laminate mechanics for balanced woven fabrics. Composites Part B2006; 37(2–3): 108–116.
3.
BhandarkarSAgarwalRKDasguptaA. Micromechanical simulation of thermo-mechanical and thermal properties of woven-fabric composites. Comput Aided Des Compos Mater Technolo1992547–558.
4.
ByströmJJekabsonsNVarnaJ. An evaluation of different models for prediction of elastic properties of woven composites. Composites Part B2000; 31(1): 7–20.
5.
ChamisCC. Simplified composite micromechanics equations of hygral, thermal, and mechanical properties. Sampe Quarterly1984; 1514–23.
6.
CrookstonJJLongACJonesIA. A summary review of mechanical properties prediction methods for textile reinforced polymer composites. Proce Inst Mech Eng, Part L: J Mater Des Appl2005; 219(2): 91–109.
7.
AngioniSLMeoMForemanA. A comparison of homogenization methods for 2-D woven composites. Composites Part B-Engineering2011; 42((2): 181–189.
8.
ChandraRSinghSPGuptaK. Micromechanical damping models for fiber-reinforced composites: a comparative study. Composites Part A2002; 33(6): 787–796.
9.
ChungPWTammaKK. Woven fabric compositesdevelopments in engineering bounds, homogenization and applications. Inte J Numer Methods Eng1999; 45(12): 1757–1790.
10.
ChungPWTammaKKNamburuRR. Asymptotic expansion homogenization for heterogeneous media: computational issues and applications. Composites Part A: Applied Science and Manufacturing2001; 32(9): 1291–1301.
11.
DasguptaAAgarwalRKBhandarkarSM. Three-dimensional modeling of woven-fabric composites for effective thermo-mechanical and thermal properties. Composites Science and Technology1996; 56(3): 209–223.
12.
DonadonMVFalzonBGIannucciLHodgkinsonJM. A 3-D micromechanical model for predicting the elastic behaviour of woven laminates. Composites Science and Technology2007; 67(11-12): 2467–2477.
13.
GibsonRF. Principles of composite material mechanics. New York: McGraw-Hill, 1994.
14.
GrassiMZhangMMeoM. Prediction of stiffness and stresses in Z-Fiber reinforced composite laminates. Composites Part A: Applied Science and Manufacturing2002; 33(12): 1653–1664.
15.
HashinZ. Theory of fiber reinforced materials. National Aeronautics and Space Administration: USA, 1972.
IshikawaTChouTW. Stiffness and strength behaviour of woven fabric composites. Journal of Materials Science1982; 17(11): 3211–3220.
18.
LamersEAD. Shape distortions in fabric reinforced composite products due to processing induced fibre reorientation. PhD thesis. University of Twente, 2004.
19.
MeoMAchardFGrassiM. Finite Element Modeling of Bridging Micro-mechanics in Through-thickness Reinforced Composite Laminates. Compo Struct2005; 71(71): 383–387.
20.
NaikNKGaneshVK. An analytical method for plain weave fabric composites. Composites(UK)1995; 26(4): 281–289.
21.
NaikNKSrideviE. An analytical method for thermoelastic analysis of 3D orthogonal interlock woven composites. J reinf plast compos2002; 21(13): 1149–1149.
22.
ReidSRZhouG. Impact behaviour of fibre-reinforced composite materials and structures. CRC: Boca Raton, 2000.
23.
RosenBW. Thermomechanical properties of fibrous composites. Proce R Soc Lond. Series A, Math Phys Scie1970; 319(1536): 79–94.
24.
ScidaDAbouraZBenzeggaghMLBocherensE. Prediction of the elastic behaviour of hybrid and non-hybrid woven composites. Composites Science and Technology1998; 57(12): 1727–1740.
25.
ScidaDAbouraZBenzeggaghMLBocherensE. A micromechanics model for 3D elasticity and failure of woven-fibre composite materials. Composites Science and Technology1999; 59(4): 505–517.
TanPTongLStevenGP. Modelling for predicting the mechanical properties of textile composites–a review. Composites Part A: Applied Science and Manufacturing1997; 28(11): 903–922.
WhitcombJD. Three dimensional stress analysis of plain weave composites. Composite materials: Fatigue and fracture: A symposium sponsored by ASTM Committee D-30 on High Modulus Fibers and Their Composites, Dallas, TX, 24-25 Octber. 19841991ASTM417–417.
30.
WijskampS. Shape distortions in composites forming. PhD Thesis. University of Twente, 2005.
