Size effects on the bending strength of fiber-reinforced polymer matrix composites

Abstract

This article investigates the size effects associated with length and width, on the bending strength of marine grade polymer matrix laminated composites. A new expression for predicting the strength size effect was developed and was verified using both laboratory testing and probabilistic finite element analysis (FEA). Woven [0/45/—45/0]_5sf E-glass/vinyl ester material specimens with different lengths and widths and same thickness were evaluated to predict the effect of specimen size on the bending strength. In the probabilistic FEA models, elastic properties (E₁₁, E₂₂, G₁₂, υ₁₂), and strength parameters (F_1t, F_1c, F_2t , F_2c, F₆, ε_1t, ε_1c, ε_2t, ε_2c, ε₁₂) of the woven fabric E-glass/vinyl ester ASTM D6272 coupons were considered as random fields, and generated using Monte Carlo simulations. The relationship between the bending strength and specimen size of the [0/45/—45/0]_5sf lay-up was also evaluated experimentally. Thirty-two material specimens were prepared and tested according to ASTM D6272 using combinations of two span-to-thickness ratios (32 : 1 and 16 : 1), and two width-to-thickness ratios (3 : 1 and 1.5 : 1).

Keywords

vacuum-assisted RTM SCRIMP processing probabilistic analysis size effects

Get full access to this article

View all access options for this article.

References

Hitchon JW and Phillips DC Effect of specimen size on the strength of CFRP. Composites 1978; 9(2): 119 124.

Okabe T. and Takeda N. Size effect on tensile strength of unidirectional CFRP composites experiment and simulation. Compos Sci Technol 2002; 62(15): 2053 2064.

Wisnom MR and Atkinson JW Reduction in tensile and flexural strength of unidirectional glass fibre-epoxy with increasing specimen size. Compos Struct 1997; 38(14): 405 411.

Wisnom MR Effect of specimen size on the bending strength of unidirectional carbon fibre-epoxy . Compos Struct 1991; 18(1): 47 63.

Wisnom MR Relationship between strength variability and size effect in unidirectional carbon fibre/epoxy. Composites 1991; 22(1): 47 52.

Whitney JM and Knight M. Relationship between tensile strength and flexure strength in fiber-reinforced composites. Exp Mech 1980; 20(6): 211 216.

Kies JA The strength of glass fibers and failure of filament wound pressure vessels . NRL Report No. 6034, US Naval Research Laboratory, Washington DC, USA. 1964.

Phillips HJ and Shenoi RA Effect of specimen size on the strength scaling of GFRP laminates. Mater Lett 1994; 21(34): 229 238.

Kretsis G. , Matthews FL and Morton J. Flexural Behavior of Unidirectional Glass-Carbon Hybrid Laminates. In: Engineering Applications of New Composites. Greece: Patras, 1986, pp.421 432.

10.

Nader JW , Dagher HJ , Lopez-Anido R. , El Chiti F. , Fayad GN and Thompson L. Probabilistic finite element analysis of Modified ASTM D3039 Tension Test for polymer matrix composite. J Reinf Plast Compos 2008; 27(6): 583 597.

11.

Di Sciuva M. and Lomario D. A comparison between Monte Carlo and FORMs in calculating the reliability of a composite structure. Compos Struct 2003; 59(1): 155 162.

12.

Nader J. , Dagher H. and Lopez-Anido R. Probabilistic finite element analysis of ASTM D6641 compression test for marine grade polymer matrix composites. In: SAMPE Technical Conference, Baltimore, MD, 2007.

13.

Ayyub B. and Haldar A. Practical structural reliability techniques. J Struct Eng 1984; 110(8): 1707 1724.

14.

Mansour A. An introduction to structural reliability theory. SSC-351, Ship Structure Committee, 1990.

15.

Jackson KE and Kellas S. Scale effects in the response and failure of fiber reinforced composite laminates loaded in tension and in flexure. J Compos Mater 1992; 26(18): 2674 2705.

16.

Kellas S. and Morton J. Strength scaling in fiber composites. AIAA J 1992; 30(4): 1074 1080.

17.

Bullock RE Strength ratios of composite materials in flexure and in tension. J Compos Mater 1974; 8: 200 206.