Diglycidyl ether of Bisphenol A-based epoxy resin were toughened with varying weight fractions of thermoplastic hydroxyl-terminated polyurethane elastomer by solution blending, and their composites were prepared over an extended range of fly ash composition. Various physicomechanical properties such as tensile and flexural behavior, density, and void content have been determined. Studies revealed that toughened resin composites enhance the properties compared to neat matrix.
Rubin, I.I. ( 1990). Handbook of Plastic Materials and Technology, John Wiley & Sons, Inc., US.
2.
Manson, J.A. and Sperling, L.H. ( 1976). Polymer Blends and Composites, Plenum Press, New York.
3.
Ramakrishna, H.V., Padmapriya, S., Varadarajulu , A. and Rai , S.K. (2005). Tensile Impact and Chemical Resistance Properties of Granite Powder-Epoxy Composites, J. Reinf. Plast. Compos., 24: 451-455.
4.
Ramakrishna, H.V., Padma Priya, S. and Rai , S.K. (2006). Utilization of Flyash for Polybutyleneterepthalate-Toughened Epoxy resin, Polym. Engg. & Sci., 46: 946-953.
5.
Ramakrishna, H.V., Padma Priya, S. and Rai , S.K. (2007). Flexural Compression Chemical Resistance and Morphology Studies on Granite Powder Filled Epoxy and Acrylonitrile Butadiene Styrene Toughened Epoxy Matrices . J. Appl. Polym. Sci., 104: 171-177.
6.
Kinloch, A.J. , Maxwell, D.L. and Young, R.J. (1985). The Fracture of Hybrid-Particulate Composites. J. Mater. Sci. , 20: 4169-4184.
7.
Kishore and Santra, S. ( 2005). Individual and Combined Roles of CTBN and Flyash in Epoxy System under Compression: Correlation between Microscopic Features and Mechanical Behavior. J. Reinf. Plast. Compos., 24: 299-313.
8.
Wu, G., Gu, J. and Zhao, X. ( 2007). Preparation and Dynamic Mechanical Properties of Polyurethane-Modified Epoxy Composites Filled with Functionalized Fly ash Particulates, J. Appl. Polym. Sci., 105: 1118-1126.
9.
Astm1997, Annual Book of ASTM Standards, Philadelphia, USA.
10.
Bucknall, C.B. and Gilbert, A.H. (1989). Toughening Tetrafunctional Epoxy Resins Using Polyetherimide. Polymer , 30: 213-217.
11.
Bhuniya, S. and Adhikari, B. (2003). Toughening of Epoxy Resins by Hydroxyl-Terminated Silicon-Modified Polyurethane Oligomers , J. Appl. Polym. Sci., 90: 1497-1506.
12.
Shetty, R.R. and Rai, S.K. (2008). Tensile Flexural Density and Void Content Studies on Granite Powder Filled Hydroxyl Terminated Polyurethane Toughened Epoxy Composite. J. Reinf. Plast. Compos., 27: 1663-1671.
13.
Shetty, R.R. and Rai, S.K. (2009). Compression Impact and Fractographic Studies on Granite Powder-Filled HTPU-Toughened Epoxy Composite . J. Reinf. Plast. Compos., 28: 1255-1264.
