RETRACTED: The Effect of Kevlar Pulp Content on Mechanical and Tribological Properties of Thermoplastic Polyimide Composites

Abstract

Retracted

Get full access to this article

View all access options for this article.

References

Song, D.-Y. and Otani, N. ( 2009). Estimation of Fatigue Damage Using System Response Based on Mechanical Model of Polymer Matrix Composites, Composite Structures, 90(1): 28-33.

Marouf, B.T. , Pearson, R.A. and Bagheri, R. (2009). Anomalous Fracture Behavior in an Epoxy-based Hybrid Composite, Materials Science and Engineering: A, 515(1-2): 49-58.

Leal, A.A. , Deitzel, J.M. , McKnight, S.H. and Gillespie Jr, J.W. ( 2009). Interfacial Behavior of High Performance Organic Fibers , Polymer, 50(5): 1228-1235.

Guo, F. , Zhang, Z.-Z. , Liu, W.-M. , Su, F.-H. and Zhang, H.-J. ( 2009). Effect of Plasma Treatment of Kevlar Fabric on the Tribological Behavior of Kevlar Fabric/Phenolic Composites, Tribology International , 42(2): 243-249.

Wan, Y.Z. , Huang, Y. , He , F. , Li , Q.Y. and Lian, J.J. (2007). Tribological Properties of Three-dimensional Braided Carbon/Kevlar/Epoxy Hybrid Composites under Dry and Lubricated Conditions, Materials Science and Engineering : A, 452-453: 202-209.

Bolvari, A. , Glenn, S. , Janssen, R. and Ellis, C. ( 1997). Wear and Friction of Aramid Fiber and Polytetrafluoroethylene Filled Composites, Wear, 203-204: 697-702.

Stavropoulos, C.D. and Papanicolaou , G.C. (1997). Effect of Thickness on the Compressive Performance of Ballistically Impacted Carbon Fibre Reinforced Plastic (CFRP) Laminates, Journal of Materials Science, 32: 931-936.

Wang, A. , Lin, R. , Polineni, V.K. , Essner, A. , Stark, C. and Dumbleton, J.H. ( 1998). Carbon Fiber Reinforced Polyether Ether Ketone Composite as a Bearing Surface for Total Hip Replacement, Tribology International, 31: 661-667.

Chang, N. , Bellare, A. , Cohen, R.E. and Spector, M. ( 2000). Wear Behavior of Bulk Oriented and Fiber Reinforced UHMWPE , Wear, 241: 109-117.

10.

Drzal, L.T. and Madhukar, M. ( 1993). Fiber-Matrix Adhesion and its Relationship to Composite Mechanical Properties, Journal of Materials Science, 28: 569-610.

11.

Huang, Y.D. , Qiu, J.H. , Liu, L.X. and Zhang, Z.Q. ( 2003). The Uniform Treatment of Carbon Fiber Surface in Three-directional Orthogonal Fabric by Oxygen-plasma , Journal of Materials Science , 38: 759-766.

12.

Fukunaga, A. , Ueda, S. and Nagumo, M. ( 1999). Air-oxidation and Anodization of Pitch-Based Carbon Fibers , Carbon, 37: 1081-1085.

13.

Lee, J.S. and Kang, T.J. (1997). Changes in Physico-Chemical and Morphological Properties of Carbon Fiber by Surface Treatment, Carbon, 35: 209-216.

14.

Yang, Y.G. , He, F. , Wang, M.Z. , Li, Z.J. and Zhang, B.J. ( 1997). The Research on the Carbon Fiber Oxidation, Carbon Technology (in Chinese), 6: 12-17.

15.

Huang, C.H. ( 1997). Rare Earths Coordinate Chemistry (in Chinese), Science Publishing House, Beijing.

16.

Xia, L.G. , Li, A.J. , Yin , Q. and Wang, W.Q. (2006). Surface Treatment of Carbon Fiber and the Effects on the Interface between the Fiber and the Resin , Materials Review (in Chinese) , 20: 254-257.

17.

Liu, L. , Zhang, L.Q. , Zhao, S.H. , Jin , R.G. and Liu , M.L. (2002). Review on Rare Earth/Polymer Composite, Journal of Rare Earths , 20: 241-248.

18.

Zhang, Z.Q. , Liu, Y.W. and Huang, Y.D. (2002). The Effect of Carbon-fiber Surface Properties on the Electron-Beam Curing of Epoxy-resin Composites, Composites Science and Technology , 62: 331-337.

19.

Benabdallah, H.S. (2006). Tribological Properties and Acoustic Emissions of Some Thermoplastics Sliding Against SAE52100, Journal of Tribology, 128: 96-102.