During compression molding of sheet molding compounds air bubbles are formed that can deteriorate several properties of the final composite. The story of such bubbles is directly set by the local pressure distribution during pressing. A number of experiments have therefore been performed in order to derive the relation between the pressure and dissolution rate of some gases into relevant resins. The experimental results follow Henry’s law up to a pressure of 0.7 MPa and the rate of dissolution is highest for CO 2 in pure polyester. When applying the results to the process in focus it is found that even large bubbles can be dissolved into the liquid resin during manufacturing. Hence, there is a potential to produce parts with very low void content.
Mallick, P.K. ( 1990). Compression Molding, In: Mallick, P. K. and Newman, S. (eds), Composite Materials Technology - Processes and Properties, pp. 67-102, Hanser Publishers, Munich, Vienna, New York.
Advani, S.G. and Tucker, C.L. ( 1987). The Use of Tensors to Describe and Predict Fiber Orientation in Short Fiber Composites, Journal of Rheology, 3(8): 751-784.
5.
Kia, H.G. , Shah, B., Wathen, T.J., Mitchell, H.A. and Berger, C.R. (2006). Powder Priming of SMC. Part II: Failure Mechanism, Journal of Composite Materials , 40(16): 1431-1447.
6.
Odenberger, P.T. , Andersson, H.M. and Lundström , T.S. (2004). Experimental Flow-front Visualization in Compression Moulding of SMC, Composites Part A: Applied Science and Manufacturing, 35: 1125-1134.
7.
Comte, E., Merhi, D., Michaud, V. and Manson, J.A.E. ( 2006). Void Formation and Transport During SMC Manufacturing: Effect of the Glass Fiber Sizing, Polymer Composites, 27(3): 289-298.
8.
Dumont, P., Orgéas, L., Favier, D., Pizette, P. and Venet, C. ( 2007). Compression Moulding of SMC: In situ Experiments, Modelling and Simulation, Composites Part A: Applied Science and Manufacturing , 38(2): 353-368.
9.
Lundström, T.S. (1997). Measurement of Void Collapse during Resin Transfer Moulding, Composites Part A , 28: 201-214.
10.
Lundström, T.S. (1996). Bubble Transport through Constricted Capillary Tube with Application to Resin Transfer Moulding, Polymer Composites, 17: 770-779.
11.
Lundström, T.S., Frishfelds, V. and Jakovics, A. (2004). A Statistical Approach to Permeability of Clustered Fibre Reinforcements, Journal of Composite Materials, 38(13): 1137-1149.
12.
Schell, J.S.U. , Deleglise, M., Binetruy, C., Krawczak, P. and Ermanni, P. (2007). Numerical Prediction and Experimental Characterisation of Meso-scale-voids in Liquid Composite Moulding, Composites Part A: Applied Science and Manufacturing , 38(12): 2460-2470.
13.
Frishfelds, V., Jakovics, A. and Lundström , T.S. (2008). Bubble Motion through Non-crimp Fabrics during Composites Manufacturing, Composites Part A: Applied Science and Manufacturing, 39(2): 243-251.
14.
Loos, A.C. and Springer, S.G. ( 1983). Curing of Epoxy Matrix Composites, Journal of Composite Materials, 17: 135-169.
15.
Kardos, J.L., Dudukovic, M.P. and Dave, R. ( 1986). Void Growth and Resin Transport during Processing of Thermosetting-matrix Composites, Advances in Polymer Science 80, Springer-Verlag, Berlin, pp. 101-123.
16.
Wood, J.R. and Bader. M.G. ( 1994). Void Control for Polymer-matrix Composites (1): Theoretical and Experimental Methods for Determining the Growth and Collapse of Gas Bubbles , Composites Manufacturing, 5: 139-147.
17.
Zingraff, L. , Michaud, V., Bourban, P.-E. and Manson, J.-A.E. (2005). Resin Transfer Moulding of Anionically Polymerised Polyamide 12, Composites Part A: Applied Science and Manufacturing, 36(12): 1675-1686.
18.
Smith, F.L. and Harvey, A.H. (2007). Avoid Common Pitfalls When Using Henry’s Law, Chemical Engineering Progress , 103: 33-39.
19.
Sanders, R. (1999). Compilation of Henry’s Law Constants for Inorganic and Organic Species of Potential Importance in Environmental Chemistry (version 3). Available at: www.henrys-law.org (accessed December 29, 2008).
