Treated mica, micro-particles, were used as model fillers to study the effect of filler loading on physicomechanical properties of polymer composites. The mica particles were surface treated by silane coupling agents. The effect of gamma rays, in air up to 50 kGy, on the physicomechanical properties of such composites was also investigated. The modulus and tensile strength of filled composites increased while the strain at break decreased with increasing filler— matrix interactions. Physical crosslinking due to a network of filler particles with polymer layer supplemented radiation crosslinking of the polymer matrix. As a result, the overall crosslink density was effectively enhanced. The strength of the networks, and hence the stiffness of the composites, increased with increasing particle—matrix interactions. However, strong matrix—filler interaction caused a loss of polymer flexibility at the particle—matrix interface, resulting in a gradual decreased elongation at break of the particle-filled composites. The thermogravimetric analysis of the composites showed that the presence of treated mica in the composites reduced the rate of decomposition. The activation energy of decomposition of the composites increased with increasing filler loading. The activation energy of decomposition was also affected by the irradiation dose.
Trakulsujaritchok, T. and Hourston, D.J. (2006). Damping Characteristics and Mechanical Properties of Silica Filled Pur/Pema Simultaneous Interpenetrating Polymer Networks, Europ. Polym. J., 42: 2968.
2.
Gatos, K.G., Martínez Alcázar, J.G., Psarras, G.C., Thomann, R. and Karger-Kocsis , J. (2007). Polyurethane Latex/Water Dispersible Boehmite Alumina Nanocomposites: Thermal, Mechanical and Dielectrical Properties, Compos. Sci. Technol. , 67: 157-167.
3.
Inubushi, S. , Ikeda, T., Tazuke, S., Satoh, T., Terada, Y. and Kumagai, Y. (1988). Excellent Flexural Properties of Aminimide-cured Epoxy Resin as a Matrix for Mica-dispersed Polymer Composites , J. Mater. Sci., 23: 1182-1188.
4.
Malik, T.M. ( 1991). Morphological and Mechanical Studies of Surface Treated Mica Reinforced High Density Polyethylene, Polym. Bull., 26: 709-714.
5.
Garton, A. ( 1982). Characterization of the Interface: Some Initial Results for Mica-polypropylene Composites, Polym. Compos., 3: 189-192.
6.
Debnath, S., De, S.K. and Khastgir, D. ( 1987). Effect of Silane Coupling Agent on Vulcanization, Network Structure, Polymer-filler Interaction, Physical Properties and Failure Mode of Mica-filled Styrene-butadiene Rubber, J. Mater. Sci., 22: 4453-4459.
7.
Rochette, A. , Choplin, L. and Tanguy, P.A. (1988). Rheological Study of Mica-filled Polypropylene as Influenced by a Coupling Agent, Polym. Compos., 9: 419-425.
8.
Rado, R. ( 1993). Preparation of Crosslinkable Polyethylene Compounds, Int. Polym. Sci. Tech., 20: 78-82.
9.
Chodak, I. ( 1995). Properties of Crosslinked Polyolefin-based Materials , J. Prog. Polym. Sci., 20: 1165-1199.
10.
Charlesby, A., Novakovic, L. and Gal, O. (1987). Memory Effect in Irradiated Polymers, Radiat. Phys. Chem., 30: 67.
11.
Rado, R. and Zelenak, P. ( 1992). Applications of Crosslinked Polyethylene, Int. Polym. Sci. Tech., 19: 72-77.
12.
Ota, S. (1981). Current Status of Irradiated Heat-shrinkable Tubing in Japan, Radiat. Phys. Chem., 18: 81-87.
13.
Lopez, M.A. , Burillo, G. and Charlesby, A. (1994). Studies on the Memory Effect in Polyethylene, Radiat. Phys. Chem., 43: 227-231.
14.
Youssef, H.A. , Ali, Z.I. and Zahran, A.H. (2001). Electron Beam Structure Modification of Poly(Vinyl Chloride)-wire Coating, Polym. Deg. Stabil., 74: 213-218.
15.
Brody, A. L. and Marsh, K. S. (eds.) (1997). The Wiley Encyclopedia of Packaging Technology, 2nd edn, Wiley, New York.
16.
Goldman, M. , Gronsky, R., Ranganathan, R. and Pruitt, L. (1996). The Effects of Gamma Radiation Sterilization and Ageing on the Structure and Morphology of Medical Grade Ultra High Molecular Weight Polyethylene, Polymer, 37: 2909-2913.
17.
Deschenes, L., Arbour, A., Brunet, F., Court, M.A., Doyon, G.J., Fortin, J. and Rodrigue, N. (1995). Irradiation of a Barrier Film: Analysis of Some Mass Transfer Aspects, Radiat. Phys. Chem., 46: 805-808.
18.
Riganakos, K.A., Koller, W.D., Ehlermann, D. E. A, Bauer B. and Kontominas, M.G. (1999). Effects of Ionizing Radiation on Properties of Monolayer and Multilayer Flexible Food Packaging Materials, Radiat. Phys. Chem., 54: 527-540.
19.
Madani, M. and El-Sayed, S.M. ( 2007). Radiation Effects on Optical Properties of Ethylene Vinyl Acetate Copolymer Films, J. Macromol. Sci., Part B: Physics , 46: 441-456.
20.
Ellis, B.B. and Welding, B.N. ( 1964). Techniques of Polymer Science, p. 46, Soc. Chem. Ind., London.
21.
Kraus, G. ( 1965). Elastomers and Reinforcing Fillers. Rubber Chem, Rubber Chem. Technol., 38: 1070-1113.
22.
Kraus, G. (ed.) (1965). Reinforcement of Elastomers, Wiley, New York.
23.
Madani, M. ( 2004). Influence of Gamma-radiation on the Electrical Conductance of Nr/ Iir Conductive Blend during Swelling in Kerosene, Polym. & Polym. Compos., 12: 243-254.
24.
Johnson, T. and Thomas, S. ( 1999). Natural Rubber Epoxidised Natural Rubber-25 Blends: Morphology, Transport Phenomena and Mechanical Properties, J. Mater. Sci. , 34: 3221-3239.
25.
Korsmeyer, R.W. , Meerwall, E.W. and Peppas, N.A. (1986). Solute and Penetrant Diffusion in Swellable Polymers. Ii. Verification of Theoretical Models, J. Polym. Sci.: Part B: Polymer Physics, 24: 409-434.
26.
Crank, J.S. ( 1975). The Mathematics of Diffusion, 2nd edn, Clarendon Press, Oxford .
27.
Khinnavar, R.S. and Aminabhavi, T.M. (1991). Diffusion and Sorption of Organic Liquids Through Polymer Membranes. I. Polyurethane Versus N-Alkanes, J. Appl Polym. Sci., 42: 2321-2328.
28.
Garbarini, G.R. , Eaton, R.F., Kwei, T.K. and Tobolsky, A.V. (1971). Diffusion and Reverse Osmosis Through Polymer Membranes, J. Chem. Educ., 48: 226-230.
29.
Elliot, J.E. and Bowman, C.N. ( 2001). Monomer Functionality and Polymer Network Formation, Macromolecules, 34: 4642-4649.
30.
Jansen, J.F.G.A. , Dias, A.A., Dorschu, M. and Coussens, B. (2003). Fast Monomers: Factors Affecting the Inherent Reactivity of Acrylate Monomers in Photoinitiated Acrylate Polymerization, Macromolecules, 36: 3861-3873.
31.
Decker, C., Moussa, K. and Le Xuan, H. ( 1991). Photopolymerization of Multifunctional Monomers: VI. Influence of Photostabilizers, Eur. Polym. J., 27: 1251-1260.
32.
Decker, C. and Moussa, K. ( 1991). Photopolymerisation de Monomeres Multifonctionnels-IV. Acrylates a Structure Carbamate Ou Oxazolidone, Eur. Polym. J., 27: 403-411.
33.
Khonakdar, H.A., Jafari, S.H., Wagenknecht, U. and Jehnichen, D. (2006). Effect of Electron-irradiation on Cross-link Density and Crystalline Structure of Low- and High-density Polyethylene, Radiat. Phys. Chem., 75: 78-86.
34.
Madani, M. ( 2004). Effect of γ-Irradiation on the Properties of Rubber-based Conductive Blend Composites, Polym. & Polym. Compos., 17: 525-534.
35.
Flory, P.J. and Rehner, J. (1943). Statistical Mechanics of Cross-linked Polymer Networks I. Rubberlike Elasticity, J. Chem. Phys., 11: 512-527.
36.
Flory, P.J. and Rehner, J. (1943). Statistical Mechanics of Cross-linked Polymer Networks II, J. Chem. Phys., 11: 521-527.
37.
Brandrup, J. and Jmmerjat, E. H. (eds.) (1989). Polymer HandBook, p. 1175, Wiley, New York.
38.
Lagaron, J.M. , Catala, R. and Gavara, R. (2004). Structural Characteristics Defining High Barrier Polymeric Materials, Mater. Sci. Technol. , 20: 1-7.
39.
Saunier, J. , Alloin, F., Sanchez, J.Y. and Barriere, B. (2004). Plasticized Microporous Poly(Vinylidene Fluoride) Separators for Lithium-Ion Batteries. II. Poly(Vinylidene Fluoride) Dense Membrane Swelling Behavior in a Liquid Electrolyte - Characterization of the Swelling Kinetics, Polymer Physics, J. Polym. Sci., Part B, 42: 544-552.
40.
Campos, M. ( 1997). Mechanism of Conduction in Doped Polyaniline, J. Phys., D30: 1531-1535.
41.
Treloar, L.R.G. (1975). The Physics of Rubber Elasticity , 3rd edn, Clarendon Press, Oxford.
42.
Seymour, R.B. and Carraher Jr., C.E. (1992). Polymer Chemistry: An Introduction, 3rd edn, p. 62, Marcel Dekker, New York.
43.
Cai, J.J. and Salovey, R. (2001). Model Filled Rubber: Mechanical Properties of Rubbery Composites, J. Mater. Sci. , 36: 3947-3953.
44.
Yasin, T., Ahmed, S., Yoshii, F. and Makuuchi, K. ( 2003). Effect of Acrylonitrile Content on Physical Properties of Electron Beam Irradiated Acrylonitrile-butadiene Rubber, React. Function. Polym., 57: 113-118.
45.
Sombatsompop, N. (1998). Investigation of Swelling Behavior of Nr Vulcanizates, Polym. Plast. Technol. Eng., 37: 19-39.
46.
Matoba, Y., Ikeda, Y. and Kohjiya, S. ( 2002). Ionic Conductivity and Mechanical Properties of Polymer Networks Prepared from High Molecular Weight Branched Poly(oxyethylene)s, Solid State Ionics, 147: 403-409.
47.
Traeger, R.K. and Castonguay, T.T. (1966). Effect of γ-Radiation on the Dynamic Mechanical Properties of Silicone Rubbers, J. Appl. Polym. Sci., 10: 535-550.
48.
Banik, I. and Bhowmick, A.K. ( 1999). Influence of Electron Beam Irradiation on the Mechanical Properties and Crosslinking of Fluorocarbon Elastomer, Radiat. Phys. Chem., 54: 135-142.
49.
Clough, R. ( 1988). Radiation Resistant Polymers. Encyclopedia of Polymer Science and Technology, Vol. 13, p. 666, John Wiley & Sons, NJ.
50.
Klein, P.G., Ladizesky, H. and Ward, I.M. ( 1987). The Contribution of Molecular Entanglements to the Rubber-elastic Behaviour of Electron-irradiated Linear Polyethylene, Polymer , 28: 393-398.
51.
Datta, S.K., Chaki, T.K., Khastgir, D. and Bhowmick, A.K. ( 1996). Electron Beam Initiated Grafting and Crosslinking of Ethylene Vinyl Acetate Copolymer. Part II: Mechanical and Electrical Properties, Polymer and Polymer Compos., 4: 419-428.
52.
Freeman, E.S. and Carroll, B. (1958). The Application of Thermoanalytical Techniques to Reaction Kinetics: The Thermogravimetric Evaluation of the Kinetics of the Decomposition of Calcium Oxalate Monohydrate, J. Phys. Chem., 62: 394-397.
53.
Mishra, R. and Rao, K.J. ( 1999). On the Formation of Poly(ethyleneoxide)-poly(vinylalcohol) Blends, Eur. Polym. J., 35: 1883-1894.
54.
Sen, M. and Copuroglu, M. ( 2005). A Comparative Study of Gamma Irradiation of Poly(ethylene-co-vinyl acetate) and Poly(ethylene-co-vinyl acetate)/Carbon Black Mixture, Mater. Chem. Phys., 93: 154-158.
