In this investigation, coatings of fly ash (an industrial waste) mixed with illmenite (a low grade ore mineral) have been deposited on mild steel and copper substrates using conventional atmospheric plasma spray technique. Micro-hardness measurement, phase composition analysis, coating porosity measurement, and surface and interface morphology are studied to characterize the coatings.
Bandopadhyaya, P.P. ( 2000). Processing and Characterization of Plasma Sprayed Ceramic Coatings on Steel Substrate. PhD Thesis, IIT, Kharagpur, India.
2.
Sathpathy, A. ( 2005). Thermal Spray Coating of Red Mud on Metals. PhD Thesis, NIT, Rourkela, India.
3.
Hayzeldon, C. , Rayment, J.J. and Cantor, B. (1983). Rapid Solidification Microstructures in Austenite Fe-Ni Alloys, Acta Metallurgical , 31: 379-386.
4.
Sampath, S. and Herman, H. ( 1990). In: Yazici, R. M. (ed.), Protective Coatings Processing and Characterization, The Mineral Metals and Materials Society, USA, p. 145.
5.
Brown, L., Herman, H. and Maccrone, R.K. ( 1986). Advances in Thermal Spraying, Pergamon Press, Oxford, p. 507.
6.
Matejka, D. and Benko, B. ( 1989). Plasma Spraying of Metallic and Ceramic Materials , Wiley Publ., New York, p. 132.
7.
Mishra, S.C. , Rout, K.C., Padmanabhan, P.V.A. and Mills, B. ( 2000). Plasma Spray Coating of Flyash Premixed with Aluminium Powder Deposited on Metal Substrates, Journal of Material Processing Technology, 102: 9-13.
8.
Thorpe, M.L. ( 1993). Major Advances in Thermal Spray Technology, Advanced Materials and Processes, Vol. 143, pp. 23-124; ASM International, Vol. 1445, Nov. 1993.
9.
Lima, C.R.C. and Trevisan, R.E. ( 1997). Graded Plasma Spraying of Premixed Metal Ceramic Powders on Metallic Substrates, Journal of Thermal Spray Technology , 6: 199-204.
10.
Ramachandran, K., Selvarajan, V., Ananthapadmanabhan , P.V. and Sreekumar, K.P. (1998). Microstructure, Adhesion, Microhardness, Abrasive Wear Resistance and Electric Resistivity of the Plasma Sprayed Alumina and Alumina-Titania Coatings. Thin Solid Films, 315: 144-152.
11.
Bull, S.J. and Rickerby, D.S. ( 1991). Evaluation of Coatings. In: Rickerby, D. S. and Matthews, A. (eds), Advanced Surface Coatings: a Handbook of Surface Engineering, Blackie, Glasgow , 315-342.
12.
Chen, H., Lee, S.W., Du, H., Ding, X.C. and Choi, C.H. ( 2004). Influence of Feed Stock and Spraying Parameters on the Deposition Efficiency and Microhardness of Plasma Sprayed Zirconia Coatings . Materials Letters. 58: 241-245.
13.
Bullard, D.E. , Lynch, D.C. and Davenport , W.G. (1992). Non-equilibrium Plasma Processing of ores, In: El-Kaddah, N. (ed.), Thermal Plasma Applications in Materials and Metallurgical Processing, 175-191.
14.
Kitamura, T. , Shibata, K. and Takeda, K. ( 1992). In-flight reduction of Fe2O3, Cr2O3, TiO2 and Al2O3 by Ar-H2 plasma, Thermal Plasma Applications in Materials and Metallurgical Processing, 209-219.
15.
Westergard, R. , Erickson, L.C., Axen, N., Hawthornes, H.M. and Hogmark, S. ( 1998). The Erosion and Abraision Characteristics of Alumina Coatings Plasma Sprayed Under Different Spraying Conditions, 31: 271-279.
