Low Temperature Izod Impact Studies of Blends Based on Impact Grade Polypropylene and Ethylene-α-Octene Copolymer

Abstract

With an aim to enhance low temperature impact strength, blends of PP-cp (Impact Grade PP) and metallocene-catalyzed plastomer (EXACT^® ethylene-α-octene copolymer) were prepared using a co-rotating, intermeshing twin-screw extruder in 90 : 10, 80 : 20, 70 : 30, and 60 : 40 weight ratio. Rheological properties studied by Haake’ single-screw extruder with torque rheometer attachment and capillary die showed pseudoplastic melt behavior at 220°C in the shear rate range of 400—4000 s^—1. Density and MFI determinations showed minimal change. Morphology studied by low voltage scanning electron microscope (LVSEM) of blend samples showed distinct biphasic blend morphology wherein PP-cp as continuous phase and plastomer as spherical domains (0.5—2 μm size) with stabilized distribution and dispersion. Izod impact strength of the blends at varied temperatures (23, 0, -10, -20, -30, and -40°C) showed substantial enhancement in low temperature impact strength compared to the base polymer (from 44 J/m in case of pure PP-cp to 539 J/m in case of 40% plastomer blend at -40°C).

Keywords

PP-cp plastomer blends impact strength morphology processing.

Get full access to this article

View all access options for this article.

References

Addeo, A. and Moore, E.P. ( 2005). Polypropylene - The Technology, In: Pasquini, N. (ed.), Polypropylene Handbook , 2nd edn, Hanser, Munich, pp. 381-447.

Jancar, J. ( 2003). Impact Behavior of Polypropylene, Its Blends and Composites , In: Karian, H. G. (ed.), Handbook of Polypropylene and Polypropylene Composites, 2nd edn, pp. 155-210, Marcel Dekker, New York.

De, S.K. and Bhowmick, A.K. ( 1990). Thermoplastic Elastomer from Rubber-Plastic Blends , Ellis Horwood, New York.

Martuscelli, E. ( 1995). Structure and Properties of Polypropylene-Elastomer Blends , In: Karger-Kocsis, J. (ed.), Polypropylene: Structure, Blends and Composites, pp. 95-140, Chapman & Hall, London.

Matsuo, M. ( 1996). Observation of Crazes in ABS-Polymer and High-Impact Polystyrene under the Electron Microscope, Polymer, 7(8): 421-425.

Dao, K.C. (1982). Mechanical Properties of Polypropylene/Crosslinked Rubber Blends, Journal of Applied Polymer Science, 27(12): 4799-4806.

Jang, B.Z. , Uhlmann, D.R. and Vander Sande, J.B. ( 1985). Rubber Toughening in Polypropylene, Journal of Applied Polymer Science, 30(6): 2485-2504.

Van der Wal, A. , Mulder, J.J. , Oderkerk, J. and Gaymans, R.J. ( 1998). Polypropylene-Rubber Blends: 1. The Effect of The Matrix Properties on The Impact Behaviour, Polymer , 39(7): 6781-6787.

Van der Wal, A. and Gaymans, R.J. (1999). Polypropylene-Rubber Blends: 5. Deformation Mechanism During Fracture, Polymer , 40(9): 6067-6075.

10.

Ramsteiner, F. (1991). Einfluß der Morphologie bei Polypropylen mit Propylen/Ethylen-Copolymerisaten auf Tieftemperaturschlagzahigkeit und Weißbruch, Acta Polymerica, 42(11): 584-589.

11.

Jiang, W. , Liu, C.H. , Wang, Z.G. , An, L.J. , Liang, H.J. , Jiang, B.Z. , Wang, X.H. and Zhang, H.X. ( 1998). Brittle-Tough Transition in PP/EPDM Blends: Effects of Interparticle Distance and Temperature, Polymer, 39(14): 3285-3288.

12.

Liang, J.Z. and Li, R.K.Y. (2000). Rubber Toughening in Polypropylene: A Review, Journal of Applied Polymer Science , 77(2): 409-417.

13.

Long, Y. and Shanks, R.A. ( 1996). PP-Elastomer-Filler Hybrids: 1. Processing, Microstructure , and Mechanical Properties, Journal of Applied Polymer Science , 61(11): 1877-1885.

14.

Kim, B.K. and Do, I.H. (1996). Effect of Viscosity Ratio, Rubber Composition and Peroxide/Coagent Treatment in PP/EPR Blends , Journal of Applied Polymer Science, 61(3): 439-447.

15.

Petrovic, Z.S. , Budinski-Simendic , J. , Divjakovic, V. and Skrbic, Z.J. (1996). Effect of Addition of Polyethylene on Properties of Polypropylene/Ethylene-Propylene Rubber Blends, Journal of Applied Polymer Science, 59(2): 301-310.

16.

Lemstra, P.J. , Meijer, H.E.H. and Van Gisbergen , J.G.M. ( 1989). Structured Polymer Blends: 2. Processing of Polypropylene/EDPM Blends: Controlled Rheology and Morphology Fixation Via Electron Beam Irradiation , Polymer, 30(12): 2153-2157.

17.

Inoue, T. and Suzuki, T. ( 1995). Selective Crosslinking Reaction in Polymer Blends: III. The Effects of The Crosslinking of Dispersed EPDM Particles on The Impact Behavior of PP/EPDM Blends, Journal of Applied Polymer Science , 56(9): 1113-1125.

18.

Ibrahim, A. and Dahlan, M. ( 1998). Thermoplastic Natural Rubber Blends, Progress in Polymer Science, 23(4): 665-706.

19.

Holden, G. , Legge, N.R. and Shroeder, H.E. ( 1987). Thermoplastic Elastomers, Hanser, Munich, pp. 575.

20.

Bianchi, L. , Cimmino, S. , Forte, A. , Greco, R. and Martuscelli , E. ( 1985). Polypropylene/Polyisobutylene Blends: Morphology-Structure-Mechanical Properties Relationships, Journal of Materials Science, 20(3): 895-905.

21.

Manaure, A.C. and Muller, A.J. (2000). Nucleation and Crystallization of Blends of Poly(Propylene) and Ethylene/α-Olefin Copolymers, Macromolecular Chemistry and Physics, 201(9): 958-972.

22.

Speri, W.M. and Patrick, G.R. ( 1975). Fiber Reinforced Rubber Modified Polypropylene, Polymer Engineering and Science , 15(9): 668-672.

23.

Han, C.D. , Villamizar, C.A. , Chen, S.J. and Kim , Y.W. (1977). Morphology and Mechanical Properties of Injection-Molded Specimens of Two-Phase Polymer Blends, Journal of Applied Polymer Science, 21(2): 353-370.

24.

Pandey, A.K. and Setua, D.K. ( 2006). Study of Damping Behavior of Rubber-Plastic Blend, Kautschuk Gummi Kunststoffe , 1-2: 45-48.

25.

Riley, D. and Valentin, R. ( 2005). High-Performance Low-Cost Polypropylene Solutions for Automotive Applications, SAE Technical Paper, 2004-01-0003.

26.

Yu, T.C. (2001). Metallocene Plastomer Modification of Polypropylenes, Polymer Engineering and Science , 41(4): 656-671.

27.

Chum, S.P. , Kao, C.I. and Knight, G.W. ( 1995). Structure and Properties of Polyolefin Plastomers and Elastomers Produced from Single Site Constrained Geometry Catalyst, Proceedings from the Polyolefins IXth International Conference , Houston, Texas.

28.

Yu, T.C. and Metzler, D.K. ( 1999). Metallocene Plastomers as Polypropylene Impact Modifiers , In: Karian, H. G. (ed.), Handbook of Polypropylene and Polypropylene Composites, 2nd edn, Marcel Dekker , New York , pp. 221-278.

29.

Yu, T.C. (1996). Preparation of Metallocene Plastomer Modified High Flow Thermoplastic Olefins, Proceedings from the SPE ANTEC, W26: 1995-2000.

30.

McNally, T. , McShane, P. , Nally , G.M. , Murphy, W.R. , Cook, M. and Miller, A. (2002). Rheology, Phase Morphology, Mechanical, Impact and Thermal Properties of Polypropylene/Metallocene Catalysed Ethylene 1-Octene Copolymer Blends, Polymer, 43(13): 3785-3793.

31.

Da Silva, A.L.N. , Rocha, M.C.G. , Coutinho, F.M.B. , Bretas, R.E.S. and Farah, M. (2002). Evaluation of Rheological and Mechanical Behavior of Blends Based on Polypropylene and Metallocene Elastomers , Polymer Testing, 21(6): 647-652.

32.

Kontopoulou, M. , Wang, W. , Gopakumar , T.G. and Cheung, C. (2003). Effect of Composition and Comonomer Type on the Rheology, Morphology and Properties of Ethylene-α-Olefin Copolymer/ Polypropylene Blends, Polymer, 44(24): 7495-7504.

33.

Da Silva, A.L.N. , Rocha, M.C.G. and Coutinho , F.M.B. (2002). Study of Rheological Behavior of Elastomer/Polypropylene Blends, Polymer Testing, 21(3): 289-293.

34.

Paul, S. and Kale, D.D. ( 2002). Rheological Study of Polypropylene Copolymer/Polyolefinic Elastomer Blends, Journal of Applied Polymer Science, 84(3): 665-671.

35.

Pedram, M.Y. , Bruna, J. , Quijada, R. and Gonzalez, B. ( 2005). Mechanical and Morphological Properties of Metallocene Elastomer/Polypropylene Blends, Proceedings from the 8th Polymers for Advanced Technologies International Symposium, Budapest, September 13-16.

36.

Meka, P. , Valentage, J. , Burke, P.J. , Killinger, K.K. and Luce, J.T. ( 2002). U.S. Patent 6399707B1.

37.

Paul, S. and Kale, D.D. ( 2000). Impact Modification of Polypropylene Copolymer with a Polyolefinic Elastomer, Journal of Applied Polymer Science , 76(9): 1480-1484.

38.

Da Silva, A.L.N. , Ines, M. , Tavares , B. , Politano, D.P. , Coutinho, F.M.B. and Rocha, M.C.G. ( 1997). Polymer Blends Based on Polyolefin Elastomer and Polypropylene , Journal of Applied Polymer Science, 66(10): 2005-2014.

39.

Dharmarajan, N.R. and Yu, T.C. (1996). Modifying Polypropylene with a Metallocene Plastomer, Plastics Engineering , 52(8): 33-35.

40.

Guimaraes, M.J.O.C. , Rocha, M.C.G. , Coutinho, F.M.B. , Bretas, R.E.S. and Farah, M. (2002). Rheological and Morphological Properties of High-Density Polyethylene and Poly (Ethylene-Octene) Blends , Journal of Applied Polymer Science, 86(9): 2240-2246.

41.

Da Silva, A.L.N. , Rocha, M.C.G. , Coutinho, F.M.B. , Bretas, R.E.S. and Scuracchio , C. (2000). Rheological and Morphological Properties of Blends Based on Ethylene-Octene Copolymer and Polypropylene, Polymer Testing, 19(4): 363-371.

42.

Da Silva, A.L.N. , Rocha, M.C.G. , Coutinho, F.M.B. , Bretas, R.E.S. and Scuracchio , C. (2000). Rheological, Mechanical, Thermal, and Morphological Properties of Polypropylene/Ethylene-Octene Copolymer Blends, Journal of Applied Polymer Science, 75(5): 692-704.

43.

Da Silva, A.L.N. , Rocha, M.C.G. , Coutinho, F.M.B. , Bretas, R.E.S. and Scuracchio , C. (2001). Rheological and Thermal Properties of Binary Blends of Polypropylene and Poly(Ethylene-CO-1-Octene) , Journal of Applied Polymer Science, 79(9): 1634-1639.

44.

Collyer, A.A. and Walker, I. ( 1994). Rubber Toughening Mechanism in Polymeric Materials , In: Collyer, A. A. (ed.), Rubber Toughened Engineering Plastics, pp. 29-53, Chapman & Hall , London.

45.

Premphet, K. and Paecharoenchai , W. ( 2001). Quantitative Characterization of Dispersed Particle Size, Size Distribution and Matrix Ligament Thickness in Polypropylene Blended with Metallocene Ethylene-Octene Copolymers, Journal of Applied Polymer Science, 82(9): 2140-2149.

46.

Kukaleva, N. , Jollands, M. , Cser, F. and Kosior, E. ( 2000). Influence of Phase Structure on Impact Toughening of Isotactic Polypropylene by Metallocene-Catalyzed Linear Low-Density Polyethylene , Journal of Applied Polymer Science, 76(7): 1011-1018.