Sage Journals: Discover world-class research

Abstract

In this paper the thermal buckling analysis of laminated conical shell/panel embedded with and without piezoelectric layer subjected to uniform temperature rise based on a higher-order shear deformation theory is studied using the finite element method. The longitudinal and circumferential components of the displacement field are given as a power series of the transverse coordinate and recast in such a manner that the conditions of zero transverse shear stresses are satisfied a priori. The displacement field is further modified in such a way that the displacements are C⁰ confirming and the finite element is a panel with nodes having 56 degrees of freedom. The effect of stacking sequence, boundary condition, slant ratio and thickness ratio on the thermal buckling temperature has been examined. The buckling temperature increases as the semi-cone angle changes from 308 to 608. The piezoelectric conical shell analysis shows an improvement in the buckling coefficient and it depends upon a fraction of piezoelectric material in the whole laminate. The results have been validated with those available in the literature.

Keywords

conical shell/panel thermal buckling piezoelectric layer finite element method.

Get full access to this article

View all access options for this article.

References

Pinto Correia, I.F. , Mota Soares, C.M. , Mota Soares, C.A. and Herskovits , J. (2003). Analysis of Laminated Conical Shell Structures using Higher Order Models, Composite Structures, 62(3-4): 383-390.

Patel, B.P. , Shukla, K.K. and Nath, Y. (2005). Thermal Postbuckling of Laminated Cross-ply Truncated Circular Conical Shell, Composite Structures, 71(1): 101-114.

Reddy, J.N. and Liu, C.F. (1985). A Higher Order Shear Deformation Theory of Laminated Elastic Shells, International Journal of Engineering Science , 23(3): 319-330.

Bhimaraddi, A. , Carr, J. and Moss, P.J. (1989). A Shear Deformable Finite Element for the Analysis of General Shells of Revolution, Computers & Structures, 31(3): 299-308.

Thangaratnam, K.R. , Palaninathan and Ramachandran, J. (1989). Thermal Buckling of Composite Laminated Plates, Computers & Structures, 32(5): 1117-1124.

Kim, K.D. (1996). Buckling Behaviour of Composite Panels using the Finite Element Method, Composite Structures , 36(1-2): 33-43.

Pinto Correia, I.F. , Mota Soares, C.M. , Mota Soares, C.A. and Herskovits , J. (2002). Active Control of Axisymmetric Shells with Piezoelectric Layers: a mixed Laminated theory with a High Order Displacement Field, Computers & Structures, 80(27-30): 2265-2275.

Sudhakar Kulkarni, A. and Kamal Bajoria , M. (2003). Finite Element Modeling of Smart Plates/Shells using Higher Order Shear Deformation Theory, Composite Structures, 62(1): 41-50.

Sai Ram, K.S. and Sreedhar Babu , T. (2002). Buckling of Laminate Composite Shells under Transverse Load, Composite Structures, 55(2): 157-168.

10.

Ganesan, N. and Kadoli, R. (2003). Buckling and Dynamic Analysis of Piezothermoelastic Composite Cylindrical Shell, Composite Structures, 59(1): 45-60.

11.

Khatri, K.N. and Bardell, N.S. (1995). The Variation of the Stiffness Coefficients for Laminated Open Conical Shell Panels, Composite Structures, 32(1-4): 287-292.

12.

Moita Jose, S. , Isidoro Correia , F.P. , Cristovao Mota Soares, M. and Carlos Mota Soares, A. (2004). Active Control of Adaptive Laminated Structures with Bonded Piezoelectric Sensors and Actuators, Computers & Structures, 82(17-19): 1349-1358.

13.

Bhaskar, K. and Varadan, T.K. (1991). A Higher-Order theory for Bending Analysis of Laminated shells of Revolution, Computers & Structures, 40(4): 815-819.

14.

Pinto Correia, I.F. , Barbosa, J.I. , Mota Soares, C.M. and Mota Soares , C.M. (2000). A Finite Element Semi-analytical Model for Laminated Axisymmetric Shells: Statics, Dynamics and Buckling, Computers & Structures , 76(1-3): 299-317.

Thermal Buckling of Laminated Conical Shells Embedded with and without Piezoelectric Layer

Abstract

Keywords

Get full access to this article

References