Hemp Fiber-Reinforced 1-Pentene/Polypropylene Copolymer: The Effect of Fiber Loading on the Mechanical and Thermal Characteristics of the Composites

Abstract

One of the recent developments in composite technology in South Africa is the increasing use of natural fiber materials in the manufacture of plastic products. Most of the previous work on natural fiber-reinforced composites has focused on sisal fiber as it was commercially available. In this study, the mechanical and thermal properties of composites made with locally produced hemp fibers, were compared with composites made with hemp fibers produced in France. New commercial polypropylene random copolymer was used as matrix because it can be processed at lower temperatures when compared with other commercial propylene copolymers. The composites were produced by extrusion compounding and were further processed into tensile test bars by injection molding. Up to 30% fiber loading could be achieved. It was observed in all composites that increasing the amount of fiber resulted in an increase in tensile strength, elastic modulus, and flexural strength and a decrease in impact strength. The thermal properties of the composites were analyzed by the thermogravimetric method. It was found that the fiber/PP composites showed excellent properties when compared to fiber and the matrix separately. The addition of hemp fibers shifted the start of the degradation process towards higher temperatures. The results obtained show that the mechanical and thermal properties of South African long hemp fiber composites compare favorably well with the French bleached and unbleached hemp fibers.

Keywords

hemp fibers polypropylene/1-pentene random copolymer hemp fiber composites.

Get full access to this article

View all access options for this article.

References

Fung, K.L. , Xing, X.S. , Li, R.K.Y. , Tjong, S.C. and Mai, Y.W. (2003). An Investigation on The Processing of Sisal Fibre-Reinforced Polypropylene Composites, Composite Science and Technology , 63(9): 1255-1258.

Hepworth, D.G. , Hobson, R.N. , Bruce, D.M. and Farrent, J.W. (2000). The Use of Unretted Hemp Fibre in Composite Manufacture, Composites Part A: Applied Science and Manufacturing, 31(11): 1279-1283.

Jayaraman, K. (2003). Manufacturing Sisal-Polypropylene Composites with Minimum Fibre Degradation, Composites Science and Technology, 63(3-4): 367-374.

Joffe, R. , Andersons, J. and Wallström, L. (2003). Strength and Adhesion Characteristics of Elementary Flax Fibres with Different Surface Treatments, Composites Part A: Applied Science and Manufacturing, 34(7): 603-612.

Rana, A.K. , Mandal, A. and Bandyopadhyay, S. (2003). Short Jute Fiber-Reinforced Polypropylene Composites: Effect of Compatibilizer, Impact Modifier and Fiber Loading, Composites Science and Technology, 63(6): 801-806.

Van de Weyenberg, I. , Ivens, J. , De Coster, A. , Kino, B. , Baetens, E. and Verpoest, I. (2003). Influence of Processing and Chemical Treatment of Flax Fibres on Their Composites, Composites Science and Technology, 63(9): 1241-1246.

Wambua, P. , Ivens, J. and Verpoest, I. (2003). Natural Fibres: can they Replace Glass in Fibre-Reinforced Plastics?, Composites Science and Technology, 63(9): 1259-1264.

Lu, X. , Zhang, M.Q. , Rong, M.Z. , Shi, G. and Yang, G.C. (2003). Self-Reinforced Melt Processable Composites of Sisal, Composites Science and Technology, 63(2): 177-186.

Li, Y. , Mai, Y. and Ye, L. (2000). Sisal Fibre and its Composites: a Review of Recent Developments, Composites Science and Technology, 60(11): 2037-2055.

10.

Joseph, P.V. , Marcelo , Rabello, S. , Mattoso, L.H.C. , Joseph, K. and Thomas, S. (2002). Environmental Effects on the Degradation Behaviour of Sisal Fibre-Reinforced Polypropylene Composites, Composites Science and Technology , 62(10-11): 1357-1372.

11.

Joseph, P.V. , Joseph, K. , Thomas, S. , Pillai, C.K.S. , Prasad, V.S. , Groeninckx, G. and Sarkissova, M. (2003). The Thermal and Crystallisation Studies of Short Sisal Fibre-Reinforced Polypropylene Composites, Composites Part A: Applied Science and Manufacturing, 34(3): 253-266.

12.

Hepworth, B. , Vincent, J.F.V. , Jeronimidis, G. and Bruce, D.M. (2000). The Penetration of Epoxy Resin Into Plant Fibre Cell Walls Increases the Stiffness of Plant Fibre Composites, Composites Part A: Applied Sci. and Manufacturing, 31(6): 599-601.

13.

Zafeiropoulos, N.E. , Williams, D.R. , Baillie, C.A. and Matthews, F.L. (2002). Engineering and Characterisation of the Interface in Flax Fibre/Polypropylene Composite Materials. Part I. Development and Investigation of Surface Treatments, Composites Part A: Applied Science and Manufacturing, 33(8): 1083-1093.

14.

Bledzki, A.K. and Gassan, J. (1999). Composites Reinforced with Cellulose Based Fibres, Progress in Polymer Science, 24(2): 221-274.

15.

Stamboulis, A. , Baillie, C.A. and Peijs, T. (2001). Effects of Environmental Conditions on Mechanical and Physical Properties of Flax Fibers, Composites Part A: Applied Science and Manufacturing, 32(8): 1105-1115.

16.

Rana, A.K. , Mandal, A. , Mitra, B.C. , Jacobson, R. , Rowell, R. and Banerjee, A.N. (1998). Fiber-Reinforced Polypropylene Composites: Effect of Compatibilizer, Journal of Applied Polymer Science, 69(2): 329-338.

17.

Zafeiropoulos, N.E. , Baillie, C.A. and Hodgkinson , J.M. (2002). Engineering and Characterisation of the Interface in Flax Fibre/Polypropylene Composite Materials. Part II. The Effect of Surface Treatments on the Interface, Composites Part A: Applied Sci. and Manufacturing, 33(9): 1185-1190.

18.

Joseph, P.V. , Mathew, G. , Joseph, K. , Groeninckx, G. and Thomas, S. (2003). Dynamic Mechanical Properties of Short Sisal Fibre-Reinforced Polypropylene Composites, Composites Part A: Applied Science and Manufacturing, 34(3): 275-290.

19.

Keller, A. (2003). Compounding and Mechanical Properties of Biodegradable Hemp Fibre Composites, Composites Science and Technology, 63(9): 1307-1316.

20.

Wielage, B. Lampke, Th. , Marx, G. , Nestler, K. and Starke, D. (1999). Thermogravimetric and Differential Scanning Calorimetric Analysis of Natural Fibres and Polypropylene , Thermochimica Acta, 337(1-2): 169-177.