Composites were fabricated by impregnating needle punched polyester nonwoven fabric in the latex composition containing PVAc/MF (90/10) blend. Different amounts of flame retarardant (FR) were incorporated into PVAc latex blend viz., 100/0, 90/10, 80/20, 70/30, and 60/40 dry, weight-by-weight. The selected FR was a synergistic FR system containing antimony trioxide and brominated organic additive. The effects of different amounts of FR in PVAc/MF latex blend on physico-mechanical properties like tensile strength, percentage elongation, specific tensile strength, and reinforcement factor of the composites have been studied. The combustion behavior of the composites has been studied using the cone calorimeter. The combustion studies revealed that the incorporation of FR significantly lowered the percentage mass loss and heat release rate of the composites. A linear relationship was found between the total oxygen consumed and peak heat release rate. From the results, it can be observed that the rate of heat release, peak heat release rate, and the total oxygen consumed by the composites have been significantly reduced with increase in the FR. The total smoke production and smoke release rate of the composites have been increased with increase in the FR. The arbitrary scale developed by Petrella was discussed to assess the hazard of composites.
Smith, W.C. (1998). Markets for Technical Needled Fabrics, In: Proceedings of the INDA's International Needle Punch Conference, Charlotte, NC, October.
2.
Hsieh, Y.L., Miller, A. and Wetting, T.J. (1996). Pore Structure and Liquid Retention of Hydrolyzed Polyester, Fabrics Text. Res. J., 66(1): 1-10.
3.
Eichorn, R.R. (1981). Mechanically Bonded Fabrics, In: Fiber Fill Conference Proceedings, INDA, Charlotte, NC, p. 2.
4.
Attwood, B.W. and White, D.G. (1979). Dry Forming Process for Multiply Board, Tappi, 62(2): 39-46.
5.
Villalobos, J.A. (1981). Dry and Curing of Dry Formed Webs, Tappi, 64(9): 129-135.
6.
Rigdahl, M., Westerlind, B., Hollmark, H. and De Ruvo, A. (1983). Introduction of Polymers into Fibrous Structures by Solution Impregnation, J. Appl. Polym. Sci., 28: 1599-1611.
Dever, M. (1993). Comparison Between Acrylic Latex Bonding and Ultrasonic Bonding of a Polyolefin Nonwoven Web, Tappi, 76(4): 181-189.
9.
Lukic, S. and Jovanic, P. (2004). Structural Analysis of Abrasive Composite Materials with Nonwoven Textile Matrix, Mater. Lett., 58: 439-443.
10.
Epstein, M. and Shishoo, R.L. (1993). Measurement of Adhesion Between Fibers and Fast Curing Elastomer Resin, J. Appl. Polym. Sci., 50: 863-874.
11.
Cusack, P.A. (1993). Evaluation of the Fire-Retardant Properties of Zinc Hydroxystannate and Antimony Trioxide in Halogenated Polyester Resins using the Cone Calorimeter Method, Fire Mater., 17: 1-6.
12.
Benzing, E.P. (1967). Flame Retardants, In: Simonds, H. R. and Church, J. M. (eds.), The Encyclopedia of Basic Materials for Plastics, Reinhold, New York, pp. 220-224.
13.
Lewin, M. (2001). Synergism and Catalysis in Flame Retardancy of Polymers, Polym. Adva. Technol., 12: 215-222.
14.
Tai, C.M. and Li, R.K.Y. (2001). Mechanical Properties of Flame Retardant Filled Polypropylene Composites, J. Appl. Polym. Sci., 18: 2718-2728.
15.
Learmonth, G.S. and Marroot, A.G. (1969). Thermal Degradation of Phenolic Resins, Polym., 5: 441-448.
16.
Thomas, M. (1994). Flame Retardant Selection for Textile Coatings: A Composite Approach, J. Ind. Tex., 23: 298-310.
17.
Vroman, E., Lecoeur, S., Bourbigot and Delobel, R. (2004). Guanidine Hydrogen Phosphate-Based Flame-Retardant Formulations for Cotton , J. Ind. Tex., 34: 27-38.
18.
Indu Shekar, R., Kasturiya, N., Raj, H. and Mathur, G.N. (2001). Studies on Effect of Water Repellent Treatment on Flame Retardant Properties of Fabric, J. Ind. Tex., 30: 222-254.
19.
Read, N.J. and Heighway-Bury, E.G. (1958). Flame-Resistant Finishing of Cellulosic Fabrics, J. Soc. Dyers. Colurists., 74: 823-829.
20.
Ronald, D. (1996). Flame Retardants forTextile Coatings, J. Ind. Tex., 25: 224-238.
21.
Wu, S., Mo, L., Cong, P., Yu, J. and Luo, X. (2008). Flammability and Rheological Behavior of Mixed Flame Retardant Modified Asphalt Binders, Fuel, 87: 120-124.
22.
Mihai, B., Emma, J. and Yusaku, S. (2007). Effect of Flame Retardants and Sb2O3 Synergist on the Thermal Decomposition of High-Impact Polystyrene and on Its Debromination by Ammonia Treatment, J. Anal. Appl. Pyrolysis., 79: 346-352.
23.
Learmonth, G.S. and Thwaite, D.G. (1970). Flammability of Plastics, Br. Polym. J., 2: 104-109.
24.
Hastie, J.W. (1973). Mass Spectrometric Analysis of 1atm Flames, Combustion Flame, 21: 49-54.
25.
Orman, R.G. and Holland, D. (2007). Thermal Phase Transitions in Antimony (III) Oxides, J. Solid State Chem., 180: 2587-2596.
26.
Brauman, S.K. and Brolly, A.S. (1976). Smoke Generation from the Burning of Some Polymeric Materials, Fire Retard. Chem. , 3: 66-83.
27.
Babrauskas, V. (1984). Development of the Cone Calorimeter - A Bench-Scale Heat Release Rate Apparatus Based on Oxygen Consumption , Fire Mater., 8: 81-95.
28.
Hugget, C. (1980). Estimation of Rate of Heat Release by Means of Oxygen Consumption Measurements, Fire Mater., 4: 61-65.
29.
Parker, W.J. (1984). Calculations of the Heat Release Rate by Oxygen Consumption for Various Applications, J. Fire Sci., 2: 380-395.
30.
Satheesh Kumar, M.N. and Siddaramaiah (2007). Studies on Melamine-Formaldehyde (MF) Loaded Polyvinyl Acetate-Polyester Nonwoven Fabric Composites, J. Thermo. Plast. Comp., 20: 305-322.
31.
Satheesh Kumar, M.N. and Siddaramaiah (2007). Sorption and Diffusion of Water into Melamine-Formaldehyde-Incorporated Poly(vinyl acetate)-Polyester Nonwoven Fabric Composites, Polym. Intl., 56: 409-414.
32.
Hirschler, M.M. (1992). In: Babrauskas, V. and Grayson, S. J. (eds), Heat Release in Fires [Chapter 12], Elsevier Applied Science , London, pp. 375-442.
33.
Scudamore, M.J. , Briggs, P.J. and Prager, F.H. (1991). Cone Calorimetry - A Review of Tests Carried Out on Plastics for the Association of Plastic Manufacturers in Europe, Fire Mater., 15: 65-84.
34.
Leslie, J.G. (1993). Investigation of Polymeric Materials using the Cone Calorimeter, Polym. Eng. & Sci., 33: 497-500.
35.
Tewarson, A. (1994). Flammability Parameters of Materials: Ignition, Combustion, and Fire Propagation, J. Fire Sci., 12: 329-356.
36.
Aanetti, M., Kashiwage, T., Falqui, L. and Camino, G. (2002). Cone Calorimeter Combustion and Gasification Studies of Polymer Layered Silicate Nano Composites, Chem. Mater. , 14: 881-887.
37.
Elliot, P.J. and Whiteley, R.H. (1999). A Cone Calorimeter Test for the Measurement of Flammability Properties of Insulated Wire, Polym. Degd. Stab. , 64: 577-584.
38.
Silvergleit, M., Morris, J.G. and Larosa, C.N. (2004). Flammability Characteristics of Fiber Reinforced Organic Matrix Composites, Polym. Engg. Sci., 18(2): 97-106.
39.
Bin, Li. (2002). A Study of the Thermal Decomposition and Smoke Suppression of Poly(vinyl chloride) Treated with Metal Oxides using a Cone Calorimeter at a High Incident Heat Flux, Polym. Degd. Stab., 78: 349-356.
40.
Barbrauska, V., Harris, R.H., Braun Jr, E., Levin, B.C., Paabo, R.G. and Gann, B. (1991). The Role of Bench Scale Test Data in Assessing Real Scale Fire Toxicity, NIST Technical Note 1284, Center for Fire Research, National Engineering Laboratory, National Institute of Standards and Technology, Gaithersburg , Maryland, USA, 1991.
41.
Ogle, R.A. and Schumacher, J.L. (1998). Fire Patterns on Upholstered Furniture: Smoldering Versus Flaming Combustion, Fire Tech. , 34(3): 247-265.
42.
Babrauskas, V. (1997). Sandwich Panel Performance in Full-Scale and Bench-Scale Fire Tests, Fire Mater., 21(1): 53-65.
43.
Price, D., Yan Liu, T., Hull, T.R., Milnes, G.J., Kandola, B.K. and Horrocks, A.R. (2002). Burning Behaviour of Foam/Cotton Fabric Combinations in the Cone Calorimeter, Polym. Degd. Stab., 77: 213-220.
44.
Chalabi, R. and Cullis, C.F. (1982). Smoke Formation from Burning Polystyrene and its Suppression, Fire Mater., 7(1): 25-31.
45.
Grexa, O. and Lubke, H. (2001). Flammability Parameters of Wood Tested on a Cone Calorimeter, Polym. Degd. Stab., 74: 427-432.
46.
Petrella, R.V. (1988). The Assessment of Full-Scale Fire Hazards from Cone Calorimeter Data, J. Fire Sci., 12(1): 14-43.
47.
Chow, W.K. and Han, S.S. (2004). Studies on Fire Behaviour of Video Compact Disc (VCD) Materials with a Cone Calorimeter, Polym. Testing, 23: 685-694.
