The Hybrid Model and Mechanical Properties of Hybrid Composites Reinforced with Different Diameter Fibers

Abstract

By using carbon fiber (CF) as small-diameter fiber, SiC fiber (SiCF) or boron fiber (BF) as large-diameter fiber, the SiCF/CF and BF/CF fiber reinforced epoxy resin hybrid composites have been fabricated and investigated. Through SEM micrograph analysis and fiber volume fraction statistics, the hybrid fiber distribution model of bi-diameter hybrid composites has been developed. Compressive and flexural properties of both hybrid composites were tested, and then the damage characteristics and the fracture mechanism of the two kinds of hybrid composites were studied contrastively. The hybrid effect of BF/CF composites is positive, i.e., the hybrid composites have higher compressive and flexural strengths than CFRP and BFRP. In contrast, the compressive and flexural strengths of SiCF/CF composite are both between those of CFRP and SiCFRP. The simple linear addition rule slowly dominates, obviously. The flexural modulus of the two hybrid materials obeys the rule of mixture.

Keywords

model hybrid polymer—matrix composites mechanical property.

Get full access to this article

View all access options for this article.

References

Larsson, F. and Svensson, L. (2002). Carbon, Polyethylene and PBO Hybrid Fibre Composites for Structural Lightweight Armour, Composites: Part A, 33: 221-231.

Wan, Y.Z. , Huang, Y. , He, F. , Li, Q.Y. and Lian, J.J. (2007). Tribiological Properties of Three-Dimensional Braided Carbon/Kevlar/Epoxy Hybrid Composites under Dry and Lubricated Conditions, Materials Science and Engineering A, 452-453: 202-209.

Grujicic, M. , Pandurangan, B. , Koudela, K.L. and Cheeseman , B.A. (2006). A Computational Analysis of the Ballistic Performance of Light-Weight Hybrid Composite Armors, Applied Surface Science, 253: 730-745.

Sudarisman , Davies, I.J. and Hamada, H. (2007). Compressive Failure of Unidirectional Hybrid Fiber-Reinforced Epoxy Composites Carbon and Silicon Carbide Fibres, Composites: Part A, 38: 1070-1074.

Davies, I.J. and Hamada, H. (2000). Flexural Properties of a Hybrid Polymer Matrix Composite Containing Carbon and Silicon Carbide Fibers , Advanced Composite Materials, 10(1): 77-96.

Salehi-Khojin, A. , Mahinfalah, M. , Bashirzadeh, R. and Freeman, B. (2007). Temperature Effects on Kevlar/ Hybrid and Carbon Fiber Composite Sandwiches under Impact Loading , Composite Structures, 78: 197-206.

Hayes, M.D. and Lesko, J.J. (2007). Failure Analysis of a Hybrid Composite Structural Beam, Composites: Part A, 38: 691-698.