The subject of the present article is the stress concentration factors at a small circular hole in a large sheet of plastic anisotropy, subjected to equi-biaxial tension. In the present analysis an orthotropic yield function suggested by Hill and approximate solution technique developed by Durban are used. Numerical results for aluminum and copper sheets are presented.
Mangasarian, O.L. (1960). Stresses in the Plastic Range Around a Normally Loaded Circular Hole in an Infinite Sheet, Journal of Applied Mechanics, 27: 65—73.
2.
Budiansky, B. and Mangasarian, O.L. (1960). Plastic Stress Concentration at a Circular Hole in an Infinite Sheet Subjected to Equal Biaxial Tension , Journal of Applied Mechanics, 27: 59—64.
3.
Hsu, Y.C. and Forman, R.G. (1975). Elastic-plastic Analysis of an Infinite Sheet Having a Circular Hole Under Pressure, Journal of Applied Mechanics, 42: 347—352.
4.
Durban, D. and Birman, V. (1982). On the Elasto-plastic Stress Concentration at a Circular Hole in an Anisotropic Sheet, Acta Mechanica, 43: 73—84.
5.
Durban, D. (1987). An Approximate Method in Plain Stress Small Strain Plasticity, Journal of Applied Mechanics, 54: 968—970.
6.
Gao, X.L. and Rowlands, R.E. (1999). Analytical Solution for the Plain Strain Inclusion Problem of an Elastic Power-law Hardening Matrix Containing an Elastic Cylindrical Inclusion, International Journal of Pressure Vessels and Piping , 76: 291—297.
7.
Zhang, Y., Fitzpatrick, M.E. and Edwards, L. (2005). Analysis of the Residual Stress Around a Cold-expanded Fastener Hole in a Finite Plate, Strain, 41: 59—70.
8.
Hill, R. (1976). Plastic Analysis of Pressurized Cylinders under Axial Load, International Journal of Mechanical Sciences, 18: 145—148.
9.
Durban, D. and Kubi, M. (1990). Large Strain Analysis for Plastic Orthotropic Tubes, International Journal of Solids and Structures, 26: 483—495.
