The present study gains importance through investigation of the damage analysis considering that most of the impact parameters have been undertaken experimentally. This work is focused on a qualitative and quantitative study of the low-velocity impact response of four different types of specimens with glass fabric reinforced plastics. The laminate specimens were fabricated according to the manufacturers’ recommendations. The specimens were impacted experimentally using an instrumented impact tester with a hemispherical tip.
Zhou, R. , Lu, D. H. , Jiang, Y. H. and Li, Q. N. (2005). Mechanical Properties and Erosion Wear Resistance of Polyurethane Matrix Composites , Wear, 259(11): 676-683 .
2.
Chiou, B. S. and Shoen, P. E. (2002). Effect of Cross Linking on Thermal and Mechanical Properties of Polyurethanes , Journal of Applied Polymer Science, 83(1): 212-223 .
3.
John, J. , Bhattacharya, M. and Turner, R. B. (2002). Characterisation of Polyurethane Foams from Soyabean Oil , Journal of Applied Polymer Science, 86(12): 3097-3107 .
4.
Desai, S. , Thakore, I. , Sarawade, B. D. and Devi, S. (2000). Effect of Polyols and Diisocynates on Thermo Mechanical and Morphological Properties of Polyurethanes , European Polymer Journal, 36(15): 711-725 .
5.
Sakamoto, W. K. , Kagesawa, S. and Khanda, D. G. (1998). Electrical Properties of a Composite of Polyurethane and Ferroelectric Ceramics , Journal of Material Science, 13(33): 3325-3329 .
6.
Ellyin, F. and Maser, R. (2004). Environmental Effects on the Mechanical Properties of Glass Fiber Epoxy Composite Tubular Specimens , Composites Science and Technology, 64(12): 1863-1874 .
7.
Brown, E. N. , Davis, A. K. and Sottos, N. R. (2005). Effect of Surface Treatment on the Hydrolytic Stability of E-glass Fiber Bundle Tensile Strength , Composites Science and Technology, 65(1): 129-136 .
