Effect of Loading and Surface Modification of MWCNTs on the Fracture Behavior of Epoxy Nanocomposites

Abstract

Nanocomposites consisting of multiwalled carbon nanotubes (MWCNTs) and a bifunctional epoxy resin are manufactured by a unique dispersion technique. The effect of loading and surface modification of the MWCNTs on the mechanical properties and fracture behavior of the nanocomposites is studied. Both a scanning electron microscope (SEM) and an atomic force microscope (AFM) are used to identify the mechanisms by which the nanocomposites acquired their fracture resistance. At 0.1 wt% loading, both ball-milled and acid-treated MWCNT composites perform better than the neat resin. An increase of 40% in the fracture toughness has been achieved at 0.15 wt% loading with ball-milled MWCNTs. An increase of 80% in the fracture toughness has been achieved at 0.15 wt% loading in the acid-treated MWCNT nanocomposites. The AFM images of the MWCNT nanocomposites reveal that the MWCNTs are well dispersed in both the systems. A better dispersion of MWCNTs has been achieved with acid treatment than with ball milling. The SEM images of the fractured surfaces reveal a tremendous increase in the number of fracture surface features associated with the acid-treated MWCNT nanocomposites, in comparison with the ball-milled MWCNT nanocomposites and the neat resin.

Keywords

carbon nanotubes chemical modification dispersion atomic force microscopy fracture toughness epoxy nanocomposites

Get full access to this article

View all access options for this article.

References

Ganguli, S. , Aglan, H. and Dean, D. (2005). Microstructural Origin of Strength and Toughness of Epoxy Nanocomposites , J. Elastomers and Plastics, 37(1): 19-35 .

Andrews, R. and Weisenberger, M. C. (2004). Carbon Nanotube Polymer Composite , Current Opinion in Solid State and Materials Science, 8(1): 31-37 .

Bai, J. B. and Allaoui, A. (2003). Effect of the Length and the Aggregate Size of MWNTs on the Improvement Efficiency of the Mechanical and Electrical Properties of Nanocomposites-Experimental Investigation , Composites Part A: Applied Science and Manufacturing, 34(8): 689-694 .

Bai, J. (2003). Evidence of the Reinforcement Role of Chemical Vapour Deposition Multi-walled Carbon Nanotubes in a Polymer Matrix , Carbon, 41(6): 1325-1328 .

Baibarac, M. , Baltog, I. , Godon, S. , Lefrant, S. and Chauvet, O. (2004). Covalent Functionalization of Single-walled Carbon Nanotubes by Aniline Electrochemical Polymerization , Carbon, 42(15): 3143-3152 .

Barber, A. H. , Zhao, Q. , Wagner, H. D. and Baillie, C. A. (2004). Characterization of E-glass-polypropylene Interfaces using Carbon Nanotubes as Strain Sensors , Composites Science and Technology, 64(13-14): 1915-1919 .

Barber, A. H. , Cohen, S. R. , Kenig, S. and Wagner, H. D. (2004). Interfacial Fracture Energy Measurements for Multi-walled Carbon Nanotubes Pulled from a Polymer Matrix , Composites Science and Technology, 64(15): 2283-2289 .

Dai, L. (2001). Radiation Chemistry for Microfabrication of Conjugated Polymers and Carbon Nanotubes , Radiation Physics and Chemistry, 62(1): 55-68 .

Dalton, A. B. , Byrne, H. J. , Coleman, J. N. , Curran, S. , Davey, A. P. , McCarthy, B. and Blau, W. (1999). Optical Absorption and Fluorescence of a Multi-walled Nanotube-Polymer Composite , Synthetic Metals, 102(1-3): 1176-1177 .

10.

Cui, J. , Wang, W.-P. , You, Y.-Z. , Liu, C. and Wang, P. (2004). Functionalization of Multiwalled Carbon Nanotubes by Reversible Addition Fragmentation Chain-transfer Polymerization , Polymer, 45(26): 8717-8721 .

11.

Daniel, Wagner H. (2002). Nanotube-Polymer Adhesion: A Mechanics Approach , Chemical Physics Letters, 361(1-2): 57-61 .

12.

Gojny, F. H. and Schulte, K. (2004). Functionalisation Effect on the Thermo-mechanical Behaviour of Multi-wall Carbon Nanotube/Epoxy-composites , Composites Science and Technology, 64(15): 2303-2308 .

13.

Gojny, F. H. , Wichmann, M. H. G. , Kopke, U. , Fiedler, B. and Schulte, K. (2004). Carbon Nanotubereinforced Epoxy-composites: Enhanced Stiffness and Fracture Toughness at Low Nanotube Content , Composites Science and Technology, 64(15): 2363-2371 .

14.

Frankland, S. J. V. and Harik, V. M. (2003). Analysis of Carbon Nanotube Pull-out from a Polymer Matrix , Surface Science, 525(1-3): L103-L108 .

15.

Gregan, E. , Keogh, S. M. , Maguire, A. , Hedderman, T. G. , Neill, L. O. , Chambers, G. and Byrne, H. J. (2004). Purification and Isolation of SWNTs , Carbon, 42(5-6): 1031-1035 .

16.

Hammel, E. , Tang, X. , Trampert, M. , Schmitt, T. , Mauthner, K. , Eder, A. , and Potschke, P. (2004). Carbon Nanofibers for Composite Applications , Carbon, 42(5-6): 1153-1158 .

17.

Inagaki, M. , Kaneko, K. and Nishizawa, T. (2004). Nanocarbons-Recent Research in Japan , Carbon, 42(8-9): 1401-1417 .

18.

Valentini, L. , Armentano, I. , Santilli, P. , Kenny, J. M. , Lozzi, L. and Santucci, S. (2003). Electrical Transport Properties of Conjugated Polymer onto Self-assembled Aligned Carbon Nanotubes , Diamond and Related Materials, 12(9): 1524-1531 .

19.

Wagner, H. D. and Vaia, R. A. (2004). Nanocomposites: Issues at the Interface , Materials Today, 7(11): 38-42 .

20.

Frankland, S. J. V. , Harik, V. M. , Odegard, G. M. , Brenner, D. W. and Gates, T. S. (2003). The Stress-strain Behavior of Polymer-nanotube Composites from Molecular Dynamics Simulation , Composites Science and Technology, 63(11): 1655-1661 .

21.

Liao, Y.-H. , Marietta-Tondin, O. , Liang, Z. , Zhang, C. and Wang, B. (2004). Investigation of the Dispersion Process of SWNTs/SC-15 Epoxy Resin Nanocomposites , Materials Science and Engineering A, 385(1-2): 175-181 .

22.

Xie, J. and Wong, P. (2003). Nanofluids Containing Multiwalled Carbon Nanotubes and their Enhanced Thermal Conductivities , J. Applied Physics, 94(8): 4967-4971 .

23.

Murakami, Y. , editor (1987). Stress Intensity Factors Handbook, Pergamon Press, Oxford .