Hygrothermal Aging on Pultruded Carbon Fiber/Vinyl Ester Resin Composite for Sucker Rod Application

Abstract

The effects of hygrothermal aging on thermal and mechanical properties, and on the microstructure of pultruded unidirectional carbon fiber/vinyl ester resin (CF/VE) composites were investigated. The composite specimens were immersed in distilled water and salt solution at 95 and 65 C for more than 1000 h and the moisture absorption was recorded. The diffusion rate of moisture into the composite was found to fit Fickian’s diffusion model. SEM observation revealed that the fiber-matrix interface was weakened due to the invasion of moisture leading to debonding. Three-point flexural and interlaminar shear tests showed that both flexural strength and interlaminar shear strength (ILSS) of the composite specimens deteriorated to some extent after hygrothermal aging, while stiffness was less affected. Dynamic mechanical thermal analysis (DMTA) results indicated that the glass transition temperature of the matrix underwent complicated changes, which was attributed to the combinational effects of plasticization and the formation of hydrogen bonds in the systems.

Keywords

carbon fiber vinyl ester composites pultrusion hygrothermal (environment) aging

Get full access to this article

View all access options for this article.

References

Yang, X. P. , Li, P. and Wang, C. Z. (2003). Fabrication of Continuous Carbon Fiber/Vinyl Ester Resin Composite Sucker Rods [J] , China Petroleum Machinery, 31(4): 35-38 .

Wang, C. Z. , Yu, Y. H. and Yang, X. P. (2003). Study on the Interfacial Properties of Pultruded Carbon Fiber/Vinyl Ester Resin Composites , Acta Materiale Comopositae Sinica, 20(5): 28-32 .

Yang, Z. and Zhou, J. R. (1999). Study of Thermal and Hygrothermal Behaviors of Glass/Vinyl Ester Composites , Journal of Reinforced Plastics and Composites, 18(17): 1619-1629 .

Wolff, E. G. (1993). Moisture Effects on Polymer Matrix Composites , SAMPE Journal, 29(3): 11-19 .

Selzer, S. and Friedrich, K. (1997). Mechanical Properties and Failure Behavior of Carbon Fiber Reinforced Polymer Composites under the Influence of Moisture , Composites, 28A(6): 595-604 .

Buck, S. E. , Lischer, D. W. and Nemat-Nasser, S. (1997). The Combined Effect of Load, Temperature, and Moisture on the Durability of E-glass/Vinyl Ester Composite Materials , In: 39th International SAMPE Symposium, May 4-8, 1997, pp. 444-454 .

Liao, K. , Altkorn, R. I. , Milkovich, S. M. , Gomez, J. , Schultheisz, C. R. , Brinson, L. C. , Fildes, J. M. and Brailsford, B. (1996). Long-term Durability of Composites in Secondary Infrastructure Applications , In: 28th International SAMPE Technical Conference, Nov. 4-7, pp. 1278-1289 .

Roy, Rita , Sarkar, B. K. and Bose, N. R. (2001). Effects of Moisture on the Mechanical Properties of Glass Fiber Reinforced Vinylester Resin Composites , Bulletin of Material Science, 24(1): 87-94 .

Liao, K. , Schultheise, C. R. and Hunston, D. L. (1999). Effects of Environmental Aging on the Properties of Pultruded GFRP , Composites: Part B, 30(5): 485-493 .

10.

Kootsookos, A. and Mouritz, A. P. (2004). Seawater Durability of Glass- and Carbon-polymer Composites , Composites Science and Technology, 64(10): 1503-1511 .

11.

Mijovic, Jovan and Lin, King-Fu (1985). The Effect of Hygrothermal Fatigue on Physical/Mechanical Properties and Morphology of Neat Epoxy Resin and Graphite/Epoxy Composite , Journal of Applied Polymer Science, 30(6): 2527-2549 .

12.

Shen, Chi-Hung and Springer, George S. (1976). Moisture Absorption and Desorption of Composite Materials , Journal of Composite Materials, 10(1): 2-20 .

13.

Ellyin, F. and Rohrbacher, C. (2000). Effect of Aqueous Environment and Temperature on Glass-fiber Epoxy Resin Composites , J. Reinf. Plast. Compos., 19(17): 1405-1427 .

14.

Suh, Dae-Won , Ku, Mi-Kyung and Nam, Jae-Do (2001). Equilibrium Water Uptake of Epoxy/Carbon Fiber Composites in Hygrothermal Environmental Conditions , Journal of Composite Materials, 35(3): 264-278 .

15.

Zhou, Jiming and Lucas, James, P. (1999). Hygrothermal Effects of Epoxy Resin, Part II: Variation of Glass Transition Temperature , Polymer, 40(20): 5513-5522 .

16.

Zhou, Jiming and Lucas, James P. (1999). Hygrothermal Effects of Epoxy Resin, Part I: The Nature of Water in Epoxy , Polymer, 40(20): 5505-5512 .

17.

Prian, L. and Barkatt, A. (1999). Degradation Mechanism of Fiber-reinforced Plastics and its Implications to Predictions of Long-term Behavior , Journal of Materials Science, 34(16): 3977-3989 .